SOLD 1,116 original ASM chips solid A mold, inlay removed (1 Viewer)

[luckbox]

SOLD.....how do i change the heading?

hey it is "wartdog" from old blue, i just posted a classified over there.I have not been around in awhile life happens, anyway i will be moving some chips over the next few weeks. I got these in a trade that chippshippie was going to do some labels for me, well that never happened, they are all have sharp edges,some look like they were never used, cant remember who i got them from but i traded cash plus some Aztars, they were from the original ASM (Atlantic Standard Molding) in NH (not vegas, lets just turn the page and not get back into that fiasco)

1,116 total chips in original ASM boxes, inlay removed so the recess is ready for your custom labels . I do not want to split these, if you want to get a GB fine but I will only ship to one person. They will be here for a week then they will be on eBay . Check my gallery at blue for additional pics or send me a request.........

( i might trade for a guitar, gibson, fender, or dobro, national, anything maybe, i got "samples" of those for my new addiction and they are a bit pricey, let me know what you got)

$600 firm , you pay all paypal and usa lower 48 only shipping cost, 1116 total chips breakdown;

313 retro blue
311 dayglo green
220 retro lavender
182 dayglo peach
50 yellow
22 black
18 white

 

[ssanel54]

Were inlays removed, or are they just blanks?

Looks like a pretty sweet deal!

 

[ParrotheadMZ]

Nice set. GLWS.

 

[luckbox]

inlays removed, so the recess is there to take your custom label without a problem.....

 

[MoscowRadio]

Were inlays removed, or are they just blanks?

Looks like a pretty sweet deal!

These had to have been milled. I don't think the A-mold has a recess and it looks like there are spots on each chip that would indicate milling.

 

[Tommy]

Those spots are probably from the glue.

 

[Tommy]

 

[luckbox]

NOT milled , tommy is correct that is the dab of glue that held the original label....one of the CT members from Canada is where i got them in the Aztar trade, if you research the old classifieds over at big blue i think "Lars" actually owned them originally and the Canadian member got them , then me.....i was having a set of labels done that looked like a die cut inlay, unfortunately they never got done, they were going to be a replica of the kentucky club die cut chips..like these



chippshippie was doing foil labels which would have been great for these chips most know the chippshippie story, there is an acrylic dealer button floating around over in Germany that had the Kentucky Club engraved in it that i ordered and never got....turn the page luckbox !!!

 

[Gear]

Very nice, very tempting. Laminated labels would look great on those.

 

[luckbox]

hey gear just visited your site, glad to see you got things rolling, those are some great prices on labels, you have come along quite well......it made me hesitate for a moment about selling these off, i have the artwork files for the planned labels but noooooooooooo...i gotta unload some things

 

[Poker Zombie]

@Gear, if you sold the clear labels, (allowing faux hotstamp) this would be a snap buy for me.

 

[lherron]

After seeing a few of the recent relabels that came out so well, I'm tempted. I just got the ASM color samples, and these are some of my favorite colors. Retro blue look wayyy more like pictures 5 here than in picture 1 (which is a good thing).

 

[luckbox]

After seeing a few of the recent relabels that came out so well, I'm tempted. I just got the ASM color samples, and these are some of my favorite colors. Retro blue look wayyy more like pictures 5 here than in picture 1 (which is a good thing).

another attempt to show the more true color of the blue, my cell cam isnt the best..

 

[CdnBeerLover]

@Gear, if you sold the clear labels, (allowing faux hotstamp) this would be a snap buy for me.

Well, you'd possibly see the glue spot. But can @Gear colour match the labels to the chips? If so, the effect may be the same...

 

[maxim_666666]

Those spots are probably from the glue.

100%
several times I removed the label of my ASM ... it from the glue

 

[maxim_666666]

@Gear, if you sold the clear labels, (allowing faux hotstamp) this would be a snap buy for me.

I even say more ... I'm sure they'll take hot stamping without problems ...
although the sound of these chips (no labels) deeper ..

colored chips with labels
black without

 

[BGinGA]

Very nice, very tempting. Laminated labels would look great on those.

How much for 2000 laminated labels?

 

[Poker Zombie]

Hot stamping isn't possible with the design I have in mind, only a faux hot-stamp, because it needs 2 colors, silver and black. The following was the rough draft I had for the CPS chips before Chipshippe's accident. Once his recovery appeared to have stalled, I has to roll in another direction, but I continually look for someone to offer the clear vinyl again - These ASM's (with a little smoothing work) would fit the bill perfectly.

The obverse side would have the denom and the "Blades Club" logo (different from Phantom's Blades club logo, but clearly we're both Bond fans, so it wasn't a real stretch).

 

[Poker Zombie]

Well, you'd possibly see the glue spot. But can @Gear colour match the labels to the chips? If so, the effect may be the same...

I would sand the center of the chip with 000 sandpaper to take out the spot as needed.

 

[Gear]

How much for 2000 laminated labels?

2000 @ $0.15 ea = $300 USD

 

[BGinGA]

2000 @ $0.15 ea = $300 USD

Expect an order soon.

 

[Gear]

Hot stamping isn't possible with the design I have in mind, only a faux hot-stamp, because it needs 2 colors, silver and black. The following was the rough draft I had for the CPS chips before Chipshippe's accident. Once his recovery appeared to have stalled, I has to roll in another direction, but I continually look for someone to offer the clear vinyl again - These ASM's (with a little smoothing work) would fit the bill perfectly.
View attachment 21659

The obverse side would have the denom and the "Blades Club" logo (different from Phantom's Blades club logo, but clearly we're both Bond fans, so it wasn't a real stretch).

I can probably do that. I can print metallic silver that is pretty nice looking -- it's not as reflective as foil, but it's definitely shiny. (See this thread for Quicksilver's Silver Club labels.) I also have clear vinyl now although I haven't done a lot of testing with it, because the metallic ink doesn't have nearly as much wear resistance as the regular inks and therefore lamination is pretty much a requirement. There aren't a lot of chips around that can take a laminated label and still look good with a clear label and a faux hotstamp -- that is, assuming the hotstamp looks like a standard kind of hotstamp.

THIS design, though (yours) would look fantastic. I'll make up some samples this afternoon and post pictures later today.

 

[Mrs Poker Zombie]

OMG. I think I am catching the chip collecting disease as I'm contemplating making an offer on these chips.

 

[luckbox]

Going going gone !!!!!!!