SOLD $800 - Custom poker table with monitors and shuffletech in Dallas (1 Viewer)

Status
Not open for further replies.

Nlowell

Sitting Out
Joined
Jul 4, 2019
Messages
18
Reaction score
69
Location
Texas
Rating - 0%
0   0   0
One of a kind custom poker table outfitted with a built in computer, two 21” flush mounted monitors for Tournament Director blind/round tracking, built-in shuffletech shuffler and more! Built with only high quality materials including closed cell foam, carbon fiber design raised rail with a stainless steel inner trim, high quality, low-nap speed felt, and more. I spent over $1,500 and over 40 hours building this table by hand! Five beefy modular legs (spin off screw studs for removal and storage), sliding chip and card tray, sliding computer tray, dealer position with lowered rail, etc...

I designed custom floating and adjustable monitor shelves covered in tempered glass. By adjusting the wing nuts underneath you can make sure the glass on top is perfectly level with the rest of the table so that the cards just slide across it.

The computer is an old mini dell laptop running windows XP loaded with a paid version of Tournament Director 2 and a custom layout I built specifically for this table. If I were to keep the table I might consider upgrading the laptop but it does just fine.

I also have a custom bevel cut glass for the top (cost $600) that I will sell for another $100 if wanted.

You won’t find another table like this anywhere in the world! I have it all setup so you can see it in action. Pickup only in the Dallas area (Trophy Club, TX). Serious buyers only please and thanks for looking!
916A72EE-ECCE-4012-978D-00CB7127AA99.jpeg
E9DA1766-7676-4BF5-AEB9-BBD0CD93507A.jpeg
4039699B-C9B4-4013-A078-209176A92F90.jpeg
3C4E6489-EEE0-4143-80A2-3577F8F2B54C.jpeg
4544D947-8643-4C7C-8FAA-687AFD53C5BF.jpeg
B8B2091E-0B31-4403-8CC4-BDC4D7F76D44.jpeg
B76D7479-0361-47AF-ABE4-B755724B55D9.jpeg
 
Thanks everyone for the complements! Guess I should have priced it higher but glad it’s going to a good home! I really enjoyed designing, building and playing on this table - but I just finished my new project and the wife told me one big table in the house is enough :). Here is my new RFID driven electronic table with action recording from cameras at each end, powered USB chargers at every seat, hue light strips, gorilla legs, carbon fiber design rail, etc... I had the wood table built then finished everything else myself - pretty happy with how it turned out.

I know electronic tables are controversial but I’m a geek and can’t stay away from tech...I just wish there was RFID chip action as well.

The last picture shows what the recordings look like.

C555FFE9-5781-48A3-8C1F-E6D6A599A302.jpeg

FB7E06A1-D90C-47F6-B8C2-4C0DFFDEB004.jpeg

6DC772F0-766F-46B2-A0ED-92CDFC1B4132.jpeg
018D6CED-B9CA-47D4-A477-9D52DB7571D4.jpeg
 
Status
Not open for further replies.
Back
Top Bottom