• This site contains affiliate links. If you choose to make a purchase after clicking a link, Poker Chip Forum may receive a commission at no additional cost to you. Thank you for your support!

SOLD BIG quantity small price (1 Viewer)

Status
Not open for further replies.
JeepologyOffroad

JeepologyOffroad

Royal Flush
Site Vendor
Joined
Jul 22, 2019
Messages
13,000
Reaction score
64,575
Location
NM
Rating - 100%
75   0   0
Bittersweet sale as I actually love these things, but I’ve caught the Paulson bug so these will never see the light of day. Don't have to sell, but figured it would be best to let someone else enjoy them.

Over 2000 faux clays. These can take a label and would be perfect for someone to create both a large cash and tournament set. The whites can also take dye and create some pretty awesome colors.

Those that aren’t familiar, faux clay used to have a cult following. They feel great, sound great, and stack like bricks. Anyone considering China clays I’d highly recommend checking these out. In my opinion these are miles better.

Grey: 400
Green: 400
Black: 400
Red: 395
Purple: 201
White: 100
Yellow (dyed by the captain): 119
Total: 2115

$300 + ship including the racks and case.

Price drop if entire set is purchased. $250+ship for chips and case.

GmuqX8H.jpg

WURoGmG.jpg
AkvoIHF.jpg
JLCFpcq.jpg
 
Last edited:
To my knowledge no. If they could I would be tempted to keep them. But to be fair I haven’t seen anyone attempt on here or the old forum. Just heard rumor lol. But I also read a few posts saying it could be done. So I guess I can’t give a solid answer. Laser can do some cool stuff on these though.

5D49FFF2-48B0-4D54-98D2-C248767CCFAB.png
 
No worries. I half way don’t want to sell them lol. But yeah hot stamp would be awesome on these. If any one here can hot stamp I’ll offer up a few to sacrifice.
 
Nice. Just empty every pocket indeed. The LJ is my favorite Wrangler by far. Love those things. Jeeps are my main hobby without a doubt. Current project is this XJ. It's on tons, atlas transfer case, etc. These are older photos, first 2 pics are several years old as it was the first stage of the obsession lol. No good updated shots. It's currently going under the knife for coilovers and 40s. I have build threads if anyone is bored and interested. Can also check out the instagram @JeepologyOffroad, but that's mostly other Jeeps.


jeepologyxj4.jpg

jeepologyxj7.jpg

mercout1.jpg

cfthread7.1012.jpg

mercout6.jpg




I've run a small business for the past several years to support the hobby. Mostly geared towards Cherokees, but I do some Wrangler stuff as well. Hats, shirts, mugs, stickers etc. Christmas season is usually when it picks up like crazy. Myself and a buddy of mine are actually slowing working our way into expanding in fabrication though.

flaghats1.jpg

placeit (6).png




We moved into this shop and have invested a ton into tooling. We are expecting a larger 4x8 CNC on Tuesday. I am excited. Going to use it to mill some chips. Here’s a JL we just finished lifting and putting on 37s. Anyways, if it isn’t apparent, once I start talking about Jeeps I don’t stop lol.

IMG_2251 (1).jpeg

IG3r0I6.jpg
 
JeepologyOffroad said:
To my knowledge no. If they could I would be tempted to keep them. But to be fair I haven’t seen anyone attempt on here or the old forum. Just heard rumor lol. But I also read a few posts saying it could be done. So I guess I can’t give a solid answer. Laser can do some cool stuff on these though.

View attachment 328540
Click to expand...
well that right there is super cool
 
Right on! I'll check out your site!

I've wheeled with Poor Boy Racing quite a few times. They have a racing XJ that is pretty bad ass. They do regular races and have done King of Hammers in Johnson Valley. You might like their build.

I started with a 2012 JKU, put over $20K into it over 3 years, then went to Johnson Valley. I then decided I wanted an LJ. Sold the JKU 4 or so years ago, actually traded it for the LJ. Long Story... I've been building the LJ over the last 4 years or so. Not so easy with 3 kids 10 and under.

Summary of my build:

Savvy Mid Arm suspension + 4" springs + 1.25" Body
Rubicon 241 Transfercase
Had it converted from Manual to automatic
Most parts are Savvy, Currie and Genright. Aluminum corners, fender flares.
Currie Rockjock 44 front, factory 44 rear. (Currie 60 rear on the short list)
37" tires. Can't go larger because I just bought a new house and have 1" clearance with the garage door. Also I like to drive to the trail and on weekends. Any larger and it won't make it up the mountains lol.

I used to have a much larger chip collection. I sold most to fund mods and repairs.

Recent Pic:
JB.jpg



04.jpg



The King logo above was originally used as a custom hotstamp for some Nevada Mold chips. I had the art already, figured it would look cool on the Jeep.

SK_Stamp.jpg
 
Last edited:
That’s a beauty. Those rock jocks are nice axles. I used to have a RJ44 up front and a RJ60 in the rear. All top notch parts you’re using there. 37s do plenty fine as you know. Those MTR tires run big and are amazing too. Used to be my tire of choice. 241 case is solid as well. I put one in the XJ and only swapped because I got a deal on the atlas.

That’s crazy you know poor boy racing. I actually work closely with one of their main sponsors - Cavfab. I did a lot of their advertising in their early growth stage and also ran many of their prototype long arm kits. Small world.

Old RJ44
E1164D12-0023-4C17-AC7B-A3363AF91D74.jpeg


Current Ultimate Kingpin 60
F5A71D89-3308-4149-AA64-96E31129AD97.jpeg



I would’ve stayed 37s too but I got myself a tow pig not too long ago lol

DCC77B08-3149-4107-B818-F99222F14F3A.jpeg
 
Very nice! I live about 30 minutes from Currie/Savvy, so nice to be able to pick up big parts like that. Don't know if you follow the Jeep boards, Blaine does all my work.

I would love to get an Atlas someday. One of the guys I wheel with shows off his all the time. Started pricing them when I heard some noise. Turned out to be the front driveshaft like usual.

I almost bought a trailer a year ago or so. Ending up stripping my older Warn, bought the Zeon and some other stuff. Definitely an expensive hobby. You pretty much can't buy anything for under $1000.

Too bad you're not closer, we could trade parts. I picked up my LJ in NM.
 
Yep, Blaine the steering god lol. He knows his stuff. I have build threads on CF and JF. The zeon is a nice one. I went with the trusty Warn M8000 because I wanted to do a hidden winch and it’s the biggest I could fit. But yeah Jeeps are stupid expensive. Chipping is pretty tame when compared. Even when it comes to the custom Paulsons that sell for premiums haha. Then again, they are just colorful round disks. I’ve received quite a few messages from jeepers on this forum. We may just have to do a meet up sometime.
 
Morning bump. Looks like nearly half can be spoken for if someone wants to split. Also have a lead on several more colors and quantity if more are wanted for whatever reason lol
 
Jeff said:
Are the purple and yellows dyed?

I’m interested in 100 white, 100 green, 200 black, up to 400 red at perchip prices in OP.
Click to expand...

If no one wants the full set by Friday I’ll start the split early. Busy week here or I’d start it sooner
 
Close to splitting at per chip price in Op - if we can get some of these greys accounted for. Or take the entire lot with just the case for $250+ship

300 Black
300 Green
400 Grey
 
Whole lot possibly pending. Will split after holiday weekend if no go.
 
Status
Not open for further replies.

Similar threads

BSteck
The Evolution of my Hot Stamp Set – A cautionary tale
2 3
Replies
69
Views
9K
louBdub
louBdub
Daniel Albarran
Hello from Mexico!
2
Replies
38
Views
5K
Daniel Albarran
Daniel Albarran
Back
Top Bottom