First Time Cleaning Chips, Results ( Paulson Clay Hot Stamp Chips) (1 Viewer)

Drumhoss

Straight
Joined
Oct 17, 2016
Messages
835
Reaction score
788
Location
Las Vegas
This was my first attempt at cleaning poker chips of any kind.
here are my results and a quick guide on how I did it.

Chip selection - Paulson Solids Roulette Chips w/HotStamp (Clay Chips)
IMG_1490.jpg
IMG_1492.jpg

What I used to clean the chips
IMG_1507.jpg


Savogran TSP was the only brand they had at my local Home Depot ( I had the option of powder or Liquid)

Step One - Microwaved about 4 cups of water for 2mins and mixed it with 2oz of TSP

Step Two - I dabbed the brush in the solution and gave all the chips a pre scrub

Step Three - I soaked the Chips in the Solution for about 10 Mins
IMG_1505.jpg


Step Four - after soaking for 10 mins I grabbed 1 chip at a time and scrubbed the chip with the brush.
Note: at this point the Foil Hot stamps were scrubbing right off.

If you want to preserve the hot stamp this is NOT the solution of cleaning for you.
IMG_1495.jpg


Step Five - allow to soak for another 10 mins and scrub the chips after 10 mins of soaking.

Step Six - Rinse and soapy water then clean water

Step Seven - Dry (I used a air compressor to dry chips)

IMG_1498.jpg
IMG_1502.jpg IMG_1504.jpg

at this point they were clean but looked a little dull

Step Nine - I put a few drops of oil on a cloth and wiped the chips completely

Here are all the chips compared - Bottom chips are end results
IMG_1510.jpg

IMG_1512.jpg IMG_1513.jpg IMG_1515.jpg IMG_1516.jpg
 
Last edited:
Did you oil chips with 3 in 1 oil? Mineral oil is a safer choice I believe. Plus 3 in 1 has a strong odor and is petroleum based I believe.
 
I used the 3 in 1, I was too lazy to go to the store to get mineral oil.
it does have a strong odor, to me it smells like what the use to oil the bowling lanes.
I will post an update on how long the smell last for.
 
Over 20 documented threads on this forum about how to properly clean and oil hot-stamped chips, and we get this nonsensical "how-NOT-to-do-it" thread. :cautious:
 
Over 20 documented threads on this forum about how to properly clean and oil hot-stamped chips, and we get this nonsensical "how-NOT-to-do-it" thread. :cautious:

aha, you're welcome!

The hot stamp I did want to get rid of, so that part I knew and wanted to happen.
the oil was a last second choice , if it makes you guys feel better the same laziness that kept me from getting the right oil also kept me from oiling them all.
only 12 chips were harmed in this experiment.
 
Well to add a little levity to this thread the reason I know 3 In 1 oil stinks is that I used it to oil my nose hair clippers. The smell was overwhelming after use, lol. I probably should have used mineral oil on those as well.
 

Create an account or login to comment

You must be a member in order to leave a comment

Create account

Create an account and join our community. It's easy!

Log in

Already have an account? Log in here.

Back
Top Bottom