-
This site contains affiliate links. If you choose to make a purchase after clicking a link, Poker Chip Forum may receive a commission at no additional cost to you. Thank you for your support!
Wanted Paulson Racks (1 Viewer)
- Thread starter softchewy
- Start date
- Status
Shaggy
Full House
Specifically Paulson? The last batch of chipco's from palm fit real nice.
Sparty
Flush
Unique Enterprises
Series 4200 Rack
fits new Paulsons PERFECTLY, snug.
ask for Kathy or Bob
702-649-5002
3.50 per rack...shipping is a bear.
OP
OP
OP
OP
Thanks.. prefer to be Paulson, but will check it out if I don't get any offers
RainmanTrail
Straight Flush
Do you have any close up pics of these racks?
Mental Nomad
Full House
Unique Enterprises manufactures racks for Paulson.
The same mold is used for the Unique Ent. 2400 rack as for the Paul-son 24010, just with a different branding imprint.
Details:
https://www.pokerchipforum.com/threads/new-paulson-chip-rack-supplier.15666/
In that thread:
https://www.pokerchipforum.com/threads/new-paulson-chip-rack-supplier.15666/page-4#post-307435
https://www.pokerchipforum.com/threads/new-paulson-chip-rack-supplier.15666/page-3#post-301796
Sparty
Flush
Not sure what you are looking for. These are perfect.
Sorry. The texture you see on the close ups are from the canvas painting behind the chip rack. Not in the chip rack
Attachments
Last edited:
Sparty
Flush
They fit new paulsons so snug that you have to squeeze them a bit to fit them in and could almost turn the rack upside down without tight rows falling out. They might NOT fit some new CPC chips as they are not as tight on specs and might not even quite fit 20 in a row (if brand new).
OP
OP
TroyMan
3 of a Kind
I had a box of the Unique racks waiting for me when I arrived home this evening. I had Unique swap out 4 of the 39mm racks for 5 43mm for 101 racks, total. They were able to fit them all in the original box. I paid $3.50 for the 39mm and $5.00 for the 43mm, plus $41 for shipping to Atlanta.
Very pleased with the 39mm racks. Mint Paulson Pharoah's and Dunes fit perfectly with not even the slightest bit of wiggle, but I didn't have to force them into the racks, either. Frankly, it would be impossible to achieve a better fit. That's not so say that all mint Paulsons will fit perfectly, but mine do.
As for the Chipcos, I managed to wedge in some mint ones, but they were so tight that, as you can see below, I could hold the rack up side down and the chips would not fall out. The Chipcos that I have fit better in the 67.7 racks. I'm going to get a PGI branded rack for these to see if that is maybe a happy middle.
Not as pleased with the 43mm racks. Those are identical to one that I bought from Spinettis and appear to be 67.7mm racks, which was not what I was expecting. Glad i only invested in 5 of them.
Really need to use a bigger rack for the mint Chipcos (Tampa Hard Rocks and Crystal Oysters). On the other hand, the lighty used Surfsides fit snuggly, but did not need to force them in..
Very pleased with the 39mm racks. Mint Paulson Pharoah's and Dunes fit perfectly with not even the slightest bit of wiggle, but I didn't have to force them into the racks, either. Frankly, it would be impossible to achieve a better fit. That's not so say that all mint Paulsons will fit perfectly, but mine do.
As for the Chipcos, I managed to wedge in some mint ones, but they were so tight that, as you can see below, I could hold the rack up side down and the chips would not fall out. The Chipcos that I have fit better in the 67.7 racks. I'm going to get a PGI branded rack for these to see if that is maybe a happy middle.
Not as pleased with the 43mm racks. Those are identical to one that I bought from Spinettis and appear to be 67.7mm racks, which was not what I was expecting. Glad i only invested in 5 of them.
Really need to use a bigger rack for the mint Chipcos (Tampa Hard Rocks and Crystal Oysters). On the other hand, the lighty used Surfsides fit snuggly, but did not need to force them in..
joeyshin
Straight Flush
Did you use all the racks you bought? I'm looking for 8 racks. Not enough for their minimum order.
TroyMan
3 of a Kind
Unfortunately, I'll only have one 39mm rack left after I rack / re-rack all the chips that I currently own (all but 1000 of them bought in the last 6 months).
I may actually need more after I build some of the other sets that I have in mind (some TRKs, Iron Bank Group Buy ceramics, another ceramic set, and another Paulson mixed set). It really depends on if, and how many, of my home chips (3000 Pharoah's, 300 Classics, and 3000 Crystal Oysters) I eventually decide to part ways with, and when. I'm not sure how it will eventually all net out. I'll likely find myself short again over the near term, though. Funny... I talk about eventually maybe selling some of the Pharoah's yet, just this week, I bought some Egyptian ceramic $1Ks and $5ks to complement them and I'm inquiring about buying more!
If you need 10 racks, then I suggest considering going ahead and ordering the minimum of 10. It never hurts to have an extra 2 racks and the shipping costs are going to be about the same on either 8 or 10. In fact, one of the reasons that I decided to jump in head first and buy a whole box (besides simply trusting the advice of @duffman and @BGinGA ) was that it brought my per rack shipping costs down to only $0.40 per rack.
If I decided to eventually go ahead and buy some PGI racks for my mint Chipcos, then at that point I may be able to let some of the Uniques go, but I'm not sure when that might be.
OP
OP
Your adding an average of 50 chips a day, I'd say you'll need more racks
I'll check on those when I get home tonight (y) :thumbsup:
OP
OP
fyi.. Just sold off the last of my Paulson Pharaoh's (well still have about 150 NCV greens and 50 $1ks) and am regretting it a bit. my 2 cents.. I'd suggest selling your Classics and Crystal Oysters first..
TroyMan
3 of a Kind
That is precisely the order that I have in mind...Classics... COs... and then Pharoah's! I intend to keep either a cash or a tourney set, depending on which way I go with the other sets I'm building. Partly because I still like them, and partly because it was the first decent set of chips that I owned and II'm a bit sentimental towards them.
Yeah, let me know about the ceramic high denoms. As of now, I have 20 of each of the octogons and 10 of the large $5k plaques.
OP
OP
Good to know.. wonder if that could be solved with a couple of small pieces of stick on foam pad or maybe crazy gluing a piece of plastic of the right thickness.
TroyMan
3 of a Kind
I concur. I was thinking last night that I might try to find some little clear rubber feet to put on one of the inside edges of the underside of the racks (the non-display side) to fill the gap.
Something like these....
https://www.amazon.com/eBoot-Self-a...sr=8-8-spons&keywords=round+rubber+feet&psc=1
The Unique racks fit exactly like the 24010 racks, top and bottom. The older Paulson racks had four tabs on the under side to help the "wiggle" you describe. On used Paulson chips these older style racks are great, on new chips the tabs will a lot of times grab chips from the rack underneath when picking up the rack on top.
If you want the 24010 racks, the Unique's are it. If you want the old style "Paul-Son Reno, Las Vegas" your only option is finding them on the used market, or borrowing them from a casino.
I've tried them all, and the Unique racks are my go to for Paulson chips. YMMV
joeyshin
Straight Flush
I think the Paulson branded racks are 66.6, slightly smaller. There is a thread somewhere I will PM you if I find it. Sorry to hijack your for sale OP
joeyshin
Straight Flush
Nah I didn't even know there was a difference. Thanks for the info. Does that .1 really affect the fit much?
Yes. Unique and Paulson racks are actually just a tad too small for most brand-spankin'-new Paulson chips. Doesn't take them long to wear down enough to fit, however - two or three uses will usually do it.
Sun-Fly hybrid ceramics won't fit, either.
- Status
