Anyone seen these before or know where to buy them?
-
This site contains affiliate links. If you choose to make a purchase after clicking a link, Poker Chip Forum may receive a commission at no additional cost to you. Thank you for your support!
Secure Gaming Products racks? (1 Viewer)
- Thread starter JeepologyOffroad
- Start date
bernielomax
Full House
What are you currently using for Tiger racks (or recommending). I need to get some new racks. Thanks
OP
OP
I have several different options to try out on the way before going all in.
Likely will go with chipco for mint tiger. Maybe migrate them to Paulson/unique later in the future after they see play for a bit
The 66.7mm Paulson racks I have are really, really tight. To the point that 3 of my 10 of my barrels of $5's won't fit at all. All other denoms fit but they're very snug.
My chipcos are just about perfect.
OP
OP
Yep, many NAGB chips need a couple games to fit better in Paulson racks. Some of my 312 flamingo chips won’t fit well either. Chipco I’m thinking is the answer. Will update when they arrive
OP
OP
Decided I’m going with spinettis for all my racks
Paulson - zero room and impossible to space the barrel whatsoever. Extremely tight and barrel gets stuck in the rack. Can turn it upside and barrels in there
Spinettis - tight but not painfully tight. Can get the smallest bit of space if trying to spread a barrel. Barrels don’t stay stuck. Can’t turn racks upsidedown. A few hot stamp barrels I tried are a little tight but it’s not extreme like Paulson racks
Chipco - nice fit but a little too loose for me personally.
Paulson - zero room and impossible to space the barrel whatsoever. Extremely tight and barrel gets stuck in the rack. Can turn it upside and barrels in there
Spinettis - tight but not painfully tight. Can get the smallest bit of space if trying to spread a barrel. Barrels don’t stay stuck. Can’t turn racks upsidedown. A few hot stamp barrels I tried are a little tight but it’s not extreme like Paulson racks
Chipco - nice fit but a little too loose for me personally.
Last edited:
OP
OP
Spinettis have a slightly smaller footprint and are more narrow than Paulson racks underneath too so they stack tighter. They are slightly thinner walled but still thick enough to feel quality.
Only potential downsides I’ve found are they won’t stack with other racks and they have slightly more longways play when stacked than Paulson racks
Only potential downsides I’ve found are they won’t stack with other racks and they have slightly more longways play when stacked than Paulson racks
RivieraDanny
Royal Flush
OP
OP
For anyone considering these racks - fit is PERFECT for barrels. Stacking them it seems like it is tighter on the bottom than paulson racks. Must stack they with care and not haphazardly like you can with paulson racks because it's also a tighter fit on the barrels down low too it seems
davislane
Straight Flush
- Joined
- Jul 12, 2020
- Messages
- 9,999
- Reaction score
- 14,692
apache racks with spacers to look after the precious cargo?
OP
OP
Yeah I'm sure those are fine for people who don't mind lids on their racks
RivieraDanny
Royal Flush
Did you find where to get em?? Was my link correct?
philhut
Flush
Have you found a good source for those old boxes? They are tough to source in Canada I have some for a 2k chip box but would be interested in more for a Nanuk style case.
I have only ever acquired a couple of the boxes, but I have ~20 bud jones racks. They're just a bit wider than Paulson racks. I got most of them from Jim, during the HSI sale I believe.
bernielomax
Full House
If a the racks are too loose, can this adversely impact Paulsons? I have 68mm racks which are loose but it does not bother me.
If stacked, racks containing loose fitting chips can cause chip breakage/damage.
Do you happen to have a link to the racks you're referencing? There seems to be a bunch of different options on the Spinettis site.Decided I’m going with spinettis for all my racks
Paulson - zero room and impossible to space the barrel whatsoever. Extremely tight and barrel gets stuck in the rack. Can turn it upside and barrels in there
Spinettis - tight but not painfully tight. Can get the smallest bit of space if trying to spread a barrel. Barrels don’t stay stuck. Can’t turn racks upsidedown. A few hot stamp barrels I tried are a little tight but it’s not extreme like Paulson racks
Chipco - nice fit but a little too loose for me personally.
OP
OP
This is them. In 66.7. I think I sold em out for the time being though.
And again I have to stress they stack tight. You can't toss these racks on top of each other quickly like paulsons
https://spinettisgaming.com/collect...-39mm-chips-66-7mm-insert?variant=14885298564
Create an account or login to comment
You must be a member in order to leave a comment
Create account
Create an account and join our community. It's easy!
Log in
Already have an account? Log in here.
