rambiezel
Sitting Out
Just received my trays for my SPW dealer/bomb pot, bounty, and show ‘em’ chips. He even threw in an extra tray for my Rounders sample set that I keep on my work desk. Perfect fit and quick shipping. Thanks @Sparkynutz!
-
This site contains affiliate links. If you choose to make a purchase after clicking a link, Poker Chip Forum may receive a commission at no additional cost to you. Thank you for your support!
Sale 3d Printed Stackers, E- rack, shuffle stack, card tray, Mixed game cards, Rack adapter, inserts! (2 Viewers)
- Thread starter Sparkynutz
- Start date
OP
OP
43-50 Rack Adapter now available and prices updated.
These are thicker than the rest of the adapters due to rack nubs overlapping locations.
If anyone needs just one or two, these can be mailed in an envelope cheaply.
Last edited:
divinerites
Two Pair
Hello @Sparkynutz do you have some offer to ship from EU to minimize postage hassle ??
Huskerchipper
Flush
Wait....what??? That is quite the cock fight
When did the white ones come into play?!?
OP
OP
Notice-
Sparkynutz Storage Solutions and 3d printing-
Will be on vacation May 19th-24th and will not be printing or shipping during that time.
Message response will also be delayed.
I am doing my best to fill as many in process orders as possible.
Please message me after May 25th to start or resume any orders not already notified as shipped.
Thankyou for you patience and sorry to anyone who's orders or messages I've missed.
Sparkynutz Storage Solutions and 3d printing-
Will be on vacation May 19th-24th and will not be printing or shipping during that time.
Message response will also be delayed.
I am doing my best to fill as many in process orders as possible.
Please message me after May 25th to start or resume any orders not already notified as shipped.
Thankyou for you patience and sorry to anyone who's orders or messages I've missed.
OP
OP
I made some 40mm to 40mm so they can stack tight without skipping a barrel space in middle when 2 racks wide on bottom, one rack wide centered on top.
OP
OP
Played poker with buddy's tonight and was asked if I made dice cups.
Not yet but now I will be along with a felt lined dice tray to shake onto.
Can't believe I didn't think of that or get asked for that sooner.
Stay tuned.
Not yet but now I will be along with a felt lined dice tray to shake onto.
Can't believe I didn't think of that or get asked for that sooner.
Stay tuned.
OP
OP
Customer suggestion- clear racks.
Lots of trial and error to get the two parts to fit well together.
Only making clear 4810-2 Fathat racks at this time.
They are much thinner and kinda flimsy but mostly clear.
They kinda remind me of warneke boxes but clear.
Lots of trial and error to get the two parts to fit well together.
Only making clear 4810-2 Fathat racks at this time.
They are much thinner and kinda flimsy but mostly clear.
They kinda remind me of warneke boxes but clear.
OP
OP
.8mm biggest I found for my printer. Wish I could find a larger nozzle than that.
The updated flattening racks worked perfectlyI’m interested in the 3943-11, pm’d you
I also upgraded to a 12” Bessie but the first trial did 10 and 10 with the 12” and 10” and it worked well!
Thanks @Sparkynutz
Might need more ceramics… lol
springbox
Straight
I was looking at a P1S or A1 (regular) to upgrade from my current printer. Any strong preference for one or the other? I almost exclusively print functional pieces and have only done PLA printing so far.
OP
OP
I can make tray for whichever size cards and dealer buttons you prefer.
Last edited:
OP
OP
Modular expandable racks available very soon!
40mm & 43mm are the same size to allow combining either size into a larger tray.
Each expandable tray will hold any stack size or combination you desire as long as it fits. Space between multiple stacks count as 1/2 chip for figuring.
Size 1 holds 4-6 chips
Size 2 holds 7-12 chips
Size 3 holds 13-20 chips or 10 small plaques
Size 4 holds 21-25 chips or 10 larger plaques or a deck of cards.
Dealer button, pen holder, dice slot, whatever you think of that can fit the space of each rack size also an option.
Also making edge strips for any qty and configuration as well to give a nice finished edge and hold them together firmly.
40mm & 43mm are the same size to allow combining either size into a larger tray.
Each expandable tray will hold any stack size or combination you desire as long as it fits. Space between multiple stacks count as 1/2 chip for figuring.
Size 1 holds 4-6 chips
Size 2 holds 7-12 chips
Size 3 holds 13-20 chips or 10 small plaques
Size 4 holds 21-25 chips or 10 larger plaques or a deck of cards.
Dealer button, pen holder, dice slot, whatever you think of that can fit the space of each rack size also an option.
Also making edge strips for any qty and configuration as well to give a nice finished edge and hold them together firmly.
Last edited:
demonnic
3 of a Kind
Would you be willing to sell any of the model files if I promised they were only for my own personal use? I've no interest in running a 3d printing business but I also find it hard to pay for printed things when I have 2 FDM printers and a resin printer here at home (mostly used for TTRPG minis and terrain plus odds and ends). Understand if the answer is no but I figure if I don't ask you can't say yes.
Create an account or login to comment
You must be a member in order to leave a comment
Create account
Create an account and join our community. It's easy!
Log in
Already have an account? Log in here.
