Vendor Sale Made-to-order Custom Table Toppers (57 Viewers)

[Danny_Banana]

It's taken a while, but I finally got a chance to get a couple pics of my topper. Thanks @rjdev7 for providing an outstanding product.

note: the full table pic looks a bit warped. It's not, that's just because of the wide-angle lense

 

[MVStillwater]

Good morning everyone! When I host games, it's on my boat named Stillwater (Ketchikan, AK is its "hailing port.") The background of this design is a copy of the some of plans for the boat. I have a couple of versions, one with more/larger text and one with less/smaller. I'm also including a close up of the background so you can see the detail.

Opinions welcome!

 

[rjdev7]

That's so cool. I love it.

 

[Pocket9ines]

this one is mine, also do you happen to have a template maybe where i can add the square box for the cards? Pict 2 is what i was trying to get.

 

[bluee06]

Is it possible to make a blackjack one? Still keeping the oval shape to fit inside a poker table but have a blackjack layout with side bets?

 

[bbury10]

Is it possible to make a blackjack one? Still keeping the oval shape to fit inside a poker table but have a blackjack layout with side bets?

Take a look at the link in the first post with previous designs. There are a couple of blackjack ones. Assuming you could do a custom one as well.

 

[Chipoholic8]

Well, no surprises here. @rjdev7 knocks another one out of the park! Made the design on the first try even better than I had imagined. Thanks again!

 

[SixSeven]

1. Thickness: The thickness of these toppers is 2mm.
   If you're using these directly on a dining table, it is advised to get some closed cell foam or other method of padding (read through the thread for examples of what folks have used successfully) to put under the toppers.
   Possible Solution: "Blank" toppers (empty / no print) can be purchased as the same size as your topper for 30% discount. This would allow you to use it as padding underneath your topper if you feel 2mm is not thick enough. You could also buy two printed toppers and put one under the other.

I looked through many pages of the thread but couldn't find a reference to the padding recs you mentioned here. Can you post about that as opposed to just getting a blank topper? Thanks!

 

[rjdev7]

I looked through many pages of the thread but couldn't find a reference to the padding recs you mentioned here. Can you post about that as opposed to just getting a blank topper? Thanks!

Not sure what you’re asking. You can either get two toppers and put one under the other for additional padding, or you could get a second blank topper (unprinted, black) which would be 30% less.

 

[SixSeven]

Not sure what you’re asking. You can either get two toppers and put one under the other for additional padding, or you could get a second blank topper (unprinted, black) which would be 30% less.

Sorry for not being clear. I was looking for more info on this statement by you - " it is advised to get some closed cell foam or other method of padding (read through the thread for examples of what folks have used successfully) to put under the toppers." I liked this idea in the quoted part as an option, and was looking in the thread for examples of that padding.

BTW: I am loving that you are doing these toppers and plan to order several from you. Thx for that!

EDIT: I looked on Amazon and found something. https://a.co/d/3YbRJkw

 

[bbury10]

Super happy with the purchase. RJ knocked it out of park. On the many future purchases will prob add 1/4 inch to the dimensions but was well aware that would prob be the case before ordering. Took maybe two weeks from order to my door.

 

[ScaryTerry94]

Good morning everyone! When I host games, it's on my boat named Stillwater (Ketchikan, AK is its "hailing port.") The background of this design is a copy of the some of plans for the boat. I have a couple of versions, one with more/larger text and one with less/smaller. I'm also including a close up of the background so you can see the detail.

Opinions welcome!


View attachment 1321602
View attachment 1321603
View attachment 1321604

What an amazing concept. Love it!

 

[bigblue643]

Had my first game with the topper yesterday and everyone loved it! 10/10.

 

[bluee06]

I messaged rjdev7 in regards to a table top, is that the best way to contact?

 

[davesilver88]

I messaged rjdev7 in regards to a table top, is that the best way to contact?

That likely works. If you know exactly what you want, I think you can just post it on this thread.

Note - this is not his “day job,” so manage your expectations on response time. Could be a couple days, but he’ll get back to you and he’ll deliver an excellent product.

 

[BaroneSanitation]

@rjdev7 DM sent Thank you!

 

[TheBigShow]

Are there any good outer space cosmic themed toppers so far?

Idk I was wondering the same thing myself. I'm actually working on an idea myself but I need to find a good designer.

I want to do like a space themed Empress Star design.

 

[aaron2786]

Closest I got was doing the star field on a Star Trek top someone wanted

 

[TheBigShow]

Closest I got was doing the star field on a Star Trek top someone wanted

View attachment 1331788

That’s pretty cool. I’m thinking there must be some really good Weber shots out there that can be used as a backdrop these days.

 

[TheBigShow]

James Webb*

 

[nosediceochate]

Hi, do you have any in-stock toppers or do they all take a few weeks?

Can you tell me the shipping size of the boxed package and approx weight? I need to get an extra quote for this thing being shipped to Mexico

thanks

 

[aaron2786]

Hi, do you have any in-stock toppers or do they all take a few weeks?

Can you tell me the shipping size of the boxed package and approx weight? I need to get an extra quote for this thing being shipped to Mexico

thanks

Each are made to order

 

[rjdev7]

Hi, do you have any in-stock toppers or do they all take a few weeks?

Can you tell me the shipping size of the boxed package and approx weight? I need to get an extra quote for this thing being shipped to Mexico

thanks

For a single topper:
.2 kg
Approximately 3" x 3" x 36"

 

[ScaryTerry94]

Hey all, I've decided to try and design my topper myself so have been painstakingly trying to learn illustrator to achieve this. This is my latest draft and I'm really starting to like the way it's coming out but would love any feedback on it. I'll still need to hash out some details to ensure things are high enough res and if I need to vectorize the logo but just wanted to get some feedback from the community on the design. We have a backyard little oasis/bar with a tiki vibe and most of our games are outside so I figured I'd have it all match. My wife and I used mainly some ideas and AI to create the bar logo and we have a sign in the works as well to match. Next is chips lol.

 

[GrindstonePoker]

Hey all, I've decided to try and design my topper myself so have been painstakingly trying to learn illustrator to achieve this. This is my latest draft and I'm really starting to like the way it's coming out but would love any feedback on it. I'll still need to hash out some details to ensure things are high enough res and if I need to vectorize the logo but just wanted to get some feedback from the community on the design. We have a backyard little oasis/bar with a tiki vibe and most of our games are outside so I figured I'd have it all match. My wife and I used mainly some ideas and AI to create the bar logo and we have a sign in the works as well to match. Next is chips lol.View attachment 1333647

Be careful. Illustrator can become highly addictive and next thing you know…boom…15 different toppers and 30 chip sets

 

[ScaryTerry94]

Be careful. Illustrator can become highly addictive and next thing you know…boom…15 different toppers and 30 chip sets

This I can definitely see lol

 

[SixSeven]

Hey all, I've decided to try and design my topper myself so have been painstakingly trying to learn illustrator to achieve this. This is my latest draft and I'm really starting to like the way it's coming out but would love any feedback on it. I'll still need to hash out some details to ensure things are high enough res and if I need to vectorize the logo but just wanted to get some feedback from the community on the design. We have a backyard little oasis/bar with a tiki vibe and most of our games are outside so I figured I'd have it all match. My wife and I used mainly some ideas and AI to create the bar logo and we have a sign in the works as well to match. Next is chips lol.View attachment 1333647

I like it a lot. Definitely the Hawaii/South Pacific vibe. One thing to consider is if the logo will be too bright with cards/chips over it or if you like to put the cards in the middle, maybe move the logo to offset.

 

[GrindstonePoker]

I love the logo. It’s such a good logo that I’d make it bigger and creep beyond the bet line. Just my personal preference but I think your darker colors and textures look great and make the logo colors pop

 

[TonZaga]

Built a new, bigger table and wanted another topper. Rjdev7 knocks it out of the park again. Can't wait to get this on the table!!

 

[ScaryTerry94]

I love the logo. It’s such a good logo that I’d make it bigger and creep beyond the bet line. Just my personal preference but I think your darker colors and textures look great and make the logo colors pop

I'm gonna give that a try and see how it looks, thanks!

I like it a lot. Definitely the Hawaii/South Pacific vibe. One thing to consider is if the logo will be too bright with cards/chips over it or if you like to put the cards in the middle, maybe move the logo to offset.

This is a good point, I'll try it a few different ways and see how looks, thanks.