Is there a way to fix edge spot fading? I got these chips recently and a few had fading on some of the edge spots. Not sure what caused it, but would like to try and fix them if possible. I tried using a magic eraser with no luck.
Thanks. I will try that.1000 grit wet sand paper (wet)
I cleaned but didn’t oil yet. Was thinking that maybe the top layer faded and under it could be saved? Not sure if it works like that.Cleaning/oiling?
I will try and oil but it is really faded compared to the original spot color. Do you think high grit wet sandpaper would work to remove the faded layer?It only looks like two of the spots are faded. My guess is these were exposed to sunlight and that bleached the dayglo spots. That color probably isn't coming back, at least not easily.
Try a cleaning and a bit of oil to see if that brings it back. I've brought some color back in chips that were cleaned in OxyClean and got bleached out some, but not 100% back to where they were before.
I will try and oil but it is really faded compared to the original spot color. Do you think high grit wet sandpaper would work to remove the faded layer?
Appreciate the feedback. I’ll attempt this tomorrow. Gotta get some wet sandpaper.I just tried this yesterday on an old TRK chip with a similar issue. Wish I took pre/post pics, but it worked great. Just oiled the sanded edge after and good as new!