Grimace
Full House
Where are people buying 48 and 50mm airtites? Probably with the foam ring.
Any Canadian options?
Thank you for any help.
Any Canadian options?
Thank you for any help.
Found Airtights (2 Viewers)
- Thread starter Grimace
- Start date
- Status
Air-tites.com
I don’t have mine in hand just yet, but these are cheap compared to other resalers, and their ordering breakdown is exceptionally easy to look through and know you’re getting what you need
I don’t have mine in hand just yet, but these are cheap compared to other resalers, and their ordering breakdown is exceptionally easy to look through and know you’re getting what you need
For any hypothetical chips you may or may not have procured, of course
acezag
Two Pair
This place is awesome - thanks for sharing!
I just bought a couple, one for my 48mm Tiger dealer button and one for a 50mm WSOP chip. Shipping cost as much as the air-tites… I of course remembered after I ordered I forgot to buy 2 for a couple of 39mm chips…
Will see if they fit ok on Monday. Assume the foam ring just pops out:
Will see if they fit ok on Monday. Assume the foam ring just pops out:
AlbinoDragon
Flush
The foam ring is not integrated into the capsule and does come out. I find it easier to put the chip into the foam ring then place it in the capsule.
FYI, the capsule for the 50mm chips with the ring is much larger than the chip. Triple check the dimensions on their website, but the end result is something closer to a dealer button in size than a card cap. I bought 50mm type Y's with the ring for my WSOP 'frisbees' and almost instantly disliked the result and will wind up having to figure something else for those.
FYI, the capsule for the 50mm chips with the ring is much larger than the chip. Triple check the dimensions on their website, but the end result is something closer to a dealer button in size than a card cap. I bought 50mm type Y's with the ring for my WSOP 'frisbees' and almost instantly disliked the result and will wind up having to figure something else for those.
OP
OP
Grimace
Full House
Is that just because of how large it will make it over all?Not encouraging. Mine will be here today. Disappointment looms
I like my 50mms (Dunes $25k). Yes, it is thicker than the chip but if you adjust it so that it is pressed on one side and that side faces upwards, it's not noticeable (except for the overall thickness). (right, @RocAFella1?)
I may have misunderstood the fit of the chip to capsule. I read it as “there will be empty space in the capsule” which after reading it again is probably me just being dumb.
If the fit is good, I’ll be happy. Half the reason I paid the premium for the chip is the size. The capsule making it larger overall is a win in my book
Hopefully it turns out I just can’t read. Disappointment looms
OP
OP
Grimace
Full House
Any Canadian members with some of these already in country?
Need
3 to fit 50mm chip
1 to fit 48mm chip
1 to fit 43mm while I’m looking.
Need
3 to fit 50mm chip
1 to fit 48mm chip
1 to fit 43mm while I’m looking.
The Armour Brand 48mm coin capsule is slightly bigger than 48mm (air-tite is slightly smaller), works perfectly for 48mm diameter chips and is not the size of a pie.
See post 9
https://www.pokerchipforum.com/threads/harrah’s-and-caesar’s-nola.127182/#post-2620863
See post 9
https://www.pokerchipforum.com/threads/harrah’s-and-caesar’s-nola.127182/#post-2620863
If you need 48 or 50mm I'd recomment the Y-type airtites from air-tites.com.
You can squish down the rings by 1mm, so a 48mm chip will fit into a 47mm foam ring. I do it differently than @AlbinoDragon, and I put the ring in the container as it allows me to more easily squish the ring against the side of the container if you need to squeeze the chip in.
Link: https://air-tites.com/collections/model-y-air-tite-coin-holders-with-black-rings
You can squish down the rings by 1mm, so a 48mm chip will fit into a 47mm foam ring. I do it differently than @AlbinoDragon, and I put the ring in the container as it allows me to more easily squish the ring against the side of the container if you need to squeeze the chip in.
Link: https://air-tites.com/collections/model-y-air-tite-coin-holders-with-black-rings
It’s confirmed: I just can’t read. The cases are perfect fits for the sizes I bought, and I’m not sure I’d buy anything from a different vendor after this. They’re great!
Also, I tried both methods of getting the ring and chip in the capsule, and I found the @kaimat method of pressing the chip into the foam that is already in the capsule to be much easier and resulted in a cleaner looking foam ring
Also, I tried both methods of getting the ring and chip in the capsule, and I found the @kaimat method of pressing the chip into the foam that is already in the capsule to be much easier and resulted in a cleaner looking foam ring
Ok, mixed results for me, happy with 1 out of 3. But they were pretty cheap, so no harm no foul (+ it was on me for wrong size).
Got these 3:
This one fits perfect for the 50mm WSOP chip:
The 48mm was too small for the 48mm TP (was hoping it’d still fit). The foam ring one was too large as well, but probably would’ve worked for the 50mm WSOP.
Got these 3:
This one fits perfect for the 50mm WSOP chip:
The 48mm was too small for the 48mm TP (was hoping it’d still fit). The foam ring one was too large as well, but probably would’ve worked for the 50mm WSOP.
Last edited:
Well why didn’t you post that before post 5!?
Perfect, thanks. I also got that 500k WSOP in a dibs earlier today
Agreed, I didn’t like the much larger size with the black foam. Check out the other one I got that is clear for the WSOP chip and no foam. GL.
Do you know if it’s the same for their 39mm coin capsule (as in it’s slightly oversized and will fit)?
Found these:
https://www.ebay.com/itm/3845067532...lkzp8WOn04RY/17kIPx7Jm6DI=|tkp:Bk9SR57WzIG4ZQ
- Status
Similar threads
