• This site contains affiliate links. If you choose to make a purchase after clicking a link, Poker Chip Forum may receive a commission at no additional cost to you. Thank you for your support!

Custom artwork group buy. US/CAN CARDS MOLD (13 Viewers)

BGinGA said:
On Chiptalk, the very first chip group buy (Pharaoh's Club & Casino, Paulson clays), was roughly 100,000 chips, and one of the very last group buys on CT (Championship Poker Series, china clays) was close to 350,000 chips.

If considering private ventures as group buys, then the Empress Star order was 90,000 chips (three set designs) and the Aurora Star order totalled 205,000 chips (two set designs), both for Paulson clays.

There have been several true group buys on PCF that resulted in 20,000 to 35,000 chips being ordered (ceramics, ceramic hybrids, and high-end plastics), but they were all mostly for a single set design.

The high numbers being generated in this group buy are due to a combination of low cost and the flexibility of multiple offered designs -- great attributes for any joint project.
Click to expand...
The scrubby D's were just north of 45k total after adding in the tag along custom orders. This is easily the biggest I've seen here that was a true open group buy. CPS will still go down as the largest ever I'd say. Wide appeal, reasonable pricing and quality chips. I'd love to see a venture like that again. Although depending on your definition of group buy it could be DQ'd because there was some profit had on that buy I believe.
 
Wonder when the deadline is going to be for last stragglers. Only asking because I haven't been following any of the Cards Mold threads for a day or three now.

Did anyone create a design specific for a limit set? Thinking my order of 1k chips is looking a lil light....
 
BarrieJ3 said:
Wonder when the deadline is going to be for last stragglers. Only asking because I haven't been following any of the Cards Mold threads for a day or three now.

Did anyone create a design specific for a limit set? Thinking my order of 1k chips is looking a lil light....
Click to expand...
4pm today.
 
BarrieJ3 said:
Wonder when the deadline is going to be for last stragglers. Only asking because I haven't been following any of the Cards Mold threads for a day or three now.

Did anyone create a design specific for a limit set? Thinking my order of 1k chips is looking a lil light....
Click to expand...
rookie numbers.jpg
 
SeanGecko said:
4pm today.
Click to expand...
Woah for real? Sh*t. Okay. One sec.

I'm fine as I currently am. Just a question, if I want to make a last minute change, say bump a denom up another 20 or add a limit set, is that a headache for you?

Obviously no changes to submitted designs, just wasn't sure if #'s or breakdown changes were difficult.
 
BarrieJ3 said:
Woah for real? Sh*t. Okay. One sec.

I'm fine as I currently am. Just a question, if I want to make a last minute change, say bump a denom up another 20 or add a limit set, is that a headache for you?

Obviously no changes to submitted designs, just wasn't sure if #'s or breakdown changes were difficult.
Click to expand...
4 pm CST LAST CALL FOR NUMBERS!
 
Wait what about a limit set with the Nuts? I've never once played limit in my life. Whats the multiplier between the two denoms? Should it definitely consist of 800-1000 chips?

I love the snappers. Can I work those in? I NEVER see anyone use snappers other than as a relable. We have 8 minutes people!!!!!
 
Any junk racks from eBay or amazon will be too big for a good fit. 66.7mm racks will fit best, whether from Paulson, Unique, or generic, and Chipco racks from ABC/BRPro are your second best fit.
 
BarrieJ3 said:
Wait what about a limit set with the Nuts? I've never once played limit in my life. Whats the multiplier between the two denoms? Should it definitely consist of 800-1000 chips?

I love the snappers. Can I work those in? I NEVER see anyone use snappers other than as a relable. We have 8 minutes people!!!!!
Click to expand...
You're stressing me out @BarrieJ3 HAHAHA :nailbite:
 
BarrieJ3 said:
Okay I want to do a microset with @Himewad The Nuts I think. What's a breakdown for microstakes, I've never played?
Click to expand...
Also once i get these i will most certainly want a small tourney set of those Vegas tournament chips. I'm sure we can get another 5k-10k order together after the fact and combine shipping to save.
 
jonn1ecakes said:
will these work?

https://www.amazon.com/Brybelly-Cle...words=39mm+acrylic+rack&qid=1597524570&sr=8-2
Click to expand...

Looks like these fit perfectly in 66.7mm racks. These cheap ones are 70mm. The chips are 3.3mm (ish) width so expect a barrel of 20 chips to be around 66-67mm. At best they will be a little loose at worst they can fit 21 which means you have to double check if you are handing out barrels from racks in your cash game.

If you just need something to store them in and aren't worried about the issues above these will obviously hold chips just fine.
 
BarrieJ3 said:
Wait what about a limit set with the Nuts? I've never once played limit in my life. Whats the multiplier between the two denoms? Should it definitely consist of 800-1000 chips?

I love the snappers. Can I work those in? I NEVER see anyone use snappers other than as a relable. We have 8 minutes people!!!!!
Click to expand...
We're all on the edge of our seats. Now radio silence... WHAT NUMBER DID YOU GO WITH???

But he bumped it to at least 2000.
 

Create an account or login to comment

You must be a member in order to leave a comment

Create account

Create an account and join our community. It's easy!

Register

Log in

Already have an account? Log in here.

Similar threads

S
Interest Aria tribute 39mm - Diamond Mold (tournament denominations)
Replies
2
Views
944
slimshady4239
S
justincarothers
Preorder CHIPS* GROUP BUY*: WEB Mold, GREEK Mold * Cards Mold * No-Mold * 12/2024
2 3 4
Replies
106
Views
7K
mach621
M
justincarothers
Vendor Groupbuy CHIPS* GROUP BUY*: WEB Mold, GREEK Mold * Cards Mold * No-Mold * 11/2024
2 3 4
Replies
116
Views
12K
BaroneSanitation
BaroneSanitation
justincarothers
Vendor Groupbuy CHIPS* GROUP BUY*: WEB Mold, GREEK Mold * Cards Mold * Textured No-Mold * 10/2024
3 4 5
Replies
142
Views
16K
PlaidDragon
PlaidDragon
justincarothers
  • Sticky
Preorder CHIPS* New SUN Mold*, WEB Mold, GREEK Mold 01/2025
2 3 4
Replies
91
Views
6K
Pippa
Pippa
Back
Top Bottom