• This site contains affiliate links. If you choose to make a purchase after clicking a link, Poker Chip Forum may receive a commission at no additional cost to you. Thank you for your support!

Vendor Sale Customizable Aluminum Cut Cards and Stock Designs (18 Viewers)

Status
Not open for further replies.
Hi, would like to place an order for 20 custom cut cards
 
Potsie1 said:
STOCK DESIGNS $5.99
CUSTOM DESIGNS $6.99


Pick your color:
Black, Silver, Blue, Gold, Green, Red and Hot Pink(bridge size only). All colors are brushed aluminum except silver which is matte with a beveled edge.

Pick Your Size:
Bridge or Poker.

Choose your design:

Stock designs:
Stock designs are 2 sided and can be mixed and matched from all options.

Formal Stock design
Solid formal sampler 6 pack $24 delivered
Includes 1 of each color
Samplers are not mix and match colors but you can mix and match sizes.
View attachment 1161737View attachment 1161738View attachment 1161739View attachment 1161740View attachment 1161741View attachment 1161742
Stock designs
View attachment 1299923


Custom designs:
I can put your artwork and design on an aluminum cut card.

CUSTOM MINIMUMS
Artwork ready submissions have no minimum and are print on demand.
Artwork that needs formatting have a minimum of 8 cards. I'll let you know if I'm able to format your submission. Contact me if you are unsure of what you have.
If you don't have artwork you'll need to reach out to an artist who can help you create your image. I'm happy to work directly with your artist to help them format the file.

CUSTOM ARTWORK REQUIREMENTS
Artwork submissions need to be in vectored format. Commonly used programs are illustrator and inkscape(freeware).
Images should be on a single layer and a single color as the cut cards are made by burning off the anodized surface anywhere there is color in the graphic leaving a grayish silver color on the surface.
The image can't have overlapping graphics and should use "Fill" and "No Fill" for the image and not "Stroke". Very small details may not show on the final image. Simple images like the following work best. If you have images like these black and white examples and its not vectored it will be pretty easy for me to use it anyways. Don't be afraid to reach out and I can help.
View attachment 1168067View attachment 1168066View attachment 1168064View attachment 1168063

Below is a great example of how artwork should be converted:
Thanks to @Racer96 for letting me use his artwork as an example.

Here is an incredible illustrator file that is NOT usable as is.
View attachment 1168069
Here is the same file converted for burning.
View attachment 1197134


Click to expand...

How do I send you a message.. im very interested
 
Love the new cut cards.

Fantastic work @Potsie1

IMG_7710.jpeg
IMG_7709.jpeg
IMG_7708.jpeg
IMG_7711.jpeg
 
Potsie1 said:
STOCK DESIGNS $5.99
CUSTOM DESIGNS $6.99


Pick your color:
Black, Silver, Blue, Gold, Green, Red and Hot Pink(bridge size only). All colors are brushed aluminum except silver which is matte with a beveled edge.

Pick Your Size:
Bridge or Poker.

Choose your design:

Stock designs:
Stock designs are 2 sided and can be mixed and matched from all options.

Formal Stock design
Solid formal sampler 6 pack $24 delivered
Includes 1 of each color
Samplers are not mix and match colors but you can mix and match sizes.
View attachment 1161737View attachment 1161738View attachment 1161739View attachment 1161740View attachment 1161741View attachment 1161742
Stock designs
View attachment 1299923


Custom designs:
I can put your artwork and design on an aluminum cut card.

CUSTOM MINIMUMS
Artwork ready submissions have no minimum and are print on demand.
Artwork that needs formatting have a minimum of 8 cards. I'll let you know if I'm able to format your submission. Contact me if you are unsure of what you have.
If you don't have artwork you'll need to reach out to an artist who can help you create your image. I'm happy to work directly with your artist to help them format the file.

CUSTOM ARTWORK REQUIREMENTS
Artwork submissions need to be in vectored format. Commonly used programs are illustrator and inkscape(freeware).
Images should be on a single layer and a single color as the cut cards are made by burning off the anodized surface anywhere there is color in the graphic leaving a grayish silver color on the surface.
The image can't have overlapping graphics and should use "Fill" and "No Fill" for the image and not "Stroke". Very small details may not show on the final image. Simple images like the following work best. If you have images like these black and white examples and its not vectored it will be pretty easy for me to use it anyways. Don't be afraid to reach out and I can help.
View attachment 1168067View attachment 1168066View attachment 1168064View attachment 1168063

Below is a great example of how artwork should be converted:
Thanks to @Racer96 for letting me use his artwork as an example.

Here is an incredible illustrator file that is NOT usable as is.
View attachment 1168069
Here is the same file converted for burning.
View attachment 1197134


Click to expand...
Hello Can you please reach out??? I have no clue how to use this site‍♀️‍♀️

Can you email me?? Nancymalesic@gmail.com
 
nm99 said:
I have no clue how to use this site‍
Click to expand...
Welcome. I recommend reading the Community Guidelines and New Member FAQ. Links to this information were sent you via PM when you registered. There is also a link to them in that notice you see at the top of every page. (only shown to new members)

If you have any questions, feel free to start a thread in our support forum. (linked in my signature)
 
Potsie1 said:
STOCK DESIGNS $5.99
CUSTOM DESIGNS $6.99


Pick your color:
Black, Silver, Blue, Gold, Green, Red and Hot Pink(bridge size only). All colors are brushed aluminum except silver which is matte with a beveled edge.

Pick Your Size:
Bridge or Poker.

Choose your design:

Stock designs:
Stock designs are 2 sided and can be mixed and matched from all options.

Formal Stock design
Solid formal sampler 6 pack $24 delivered
Includes 1 of each color
Samplers are not mix and match colors but you can mix and match sizes.
View attachment 1161737View attachment 1161738View attachment 1161739View attachment 1161740View attachment 1161741View attachment 1161742
Stock designs
View attachment 1299923


Custom designs:
I can put your artwork and design on an aluminum cut card.

CUSTOM MINIMUMS
Artwork ready submissions have no minimum and are print on demand.
Artwork that needs formatting have a minimum of 8 cards. I'll let you know if I'm able to format your submission. Contact me if you are unsure of what you have.
If you don't have artwork you'll need to reach out to an artist who can help you create your image. I'm happy to work directly with your artist to help them format the file.

CUSTOM ARTWORK REQUIREMENTS
Artwork submissions need to be in vectored format. Commonly used programs are illustrator and inkscape(freeware).
Images should be on a single layer and a single color as the cut cards are made by burning off the anodized surface anywhere there is color in the graphic leaving a grayish silver color on the surface.
The image can't have overlapping graphics and should use "Fill" and "No Fill" for the image and not "Stroke". Very small details may not show on the final image. Simple images like the following work best. If you have images like these black and white examples and its not vectored it will be pretty easy for me to use it anyways. Don't be afraid to reach out and I can help.
View attachment 1168067View attachment 1168066View attachment 1168064View attachment 1168063

Below is a great example of how artwork should be converted:
Thanks to @Racer96 for letting me use his artwork as an example.

Here is an incredible illustrator file that is NOT usable as is.
View attachment 1168069
Here is the same file converted for burning.
View attachment 1197134


Click to expand...
these are fantastic!

Highli99 said:
These are cool - what is the ordering process?
Click to expand...
following...

Seeking Alpha Social Club said:
SO, I did a throw test yesterday, and my assessment is:
  1. They throw nice and straight. So much so that I was surprised at how consistently I could hit the same area from 8ish feet away. Full disclosure...I spent a large part of my youth with throwing stars, but haven't touched one in 30+ years.
  2. I couldn't get them to stick into drywall, plastic covered insulation, or a cardboard box. Even from 2' away I couldn't get them to stick.
I don't know how strict customs is, but they would have a tough time proving that these could be used as a weapon as is. Sure you could grind and sharpen the edges, but that is the case with most items.

Good luck!!
Click to expand...
LOL
 
Can Insckape convert a (very high res) PSD file to vector?

My art is 1200 dpi and solid colors, no gradients.

Or does anyone know of a free service to do a PSD to vector conversion? (I know of paid options.)
 
Taghkanic said:
Can Insckape convert a (very high res) PSD file to vector?

My art is 1200 dpi and solid colors, no gradients.

Or does anyone know of a free service to do a PSD to vector conversion? (I know of paid options.)
Click to expand...
You can do the needed conversion to vector by downloading the trial version of Lightburn software, opening the image and saving as vector I believe.
 
Status
Not open for further replies.

Similar threads

Potsie1
  • Locked
Customizable Aluminum Cut Card Preview
Replies
23
Views
2K
Potsie1
Potsie1
Back
Top Bottom