SixSpeedFury
Full House
Did anyone ever get around to sound dampening the Shuffle Tech? So far all I've seen is posts about sound proofing drink carts that hold it.
Is a shuffle tech worth it for my game. (7 Viewers)
- Thread starter yoke386
- Start date
Has anyone experimented with some type of foam dampening on the sides of the internal tray?
It appears that most of the noise that comes from the shuffler is the plastic cards hitting the tray walls.
Something like this:
https://www.amazon.com/BENECREAT-Self-Adhesive-Insulation-Containers-Protection/dp/B08DY82HZW/ref=mp_s_a_1_8_maf_1?keywords=adhesive+foam+sheets&qid=1699031182&sr=8-8&th=1&psc=1
Last edited:
YES
So I bought the cart, and the last two shuffle techs I have opened have been broken.
The rollers don’t work and the card tray is stuck on the bottom.
Annoyed…
The rollers don’t work and the card tray is stuck on the bottom.
Annoyed…
Wild..
Purchased directly from Shuffletech?
1 here, 1 direct.
I think I got the one working. Had to push down on the tray.
These things are finnicky I think.
Side rollers weren’t working. And the tray wouldn’t come up.
I recall reading that when first setting it up, you had to push the tray to the bottom.
Yeah actually got one working!
Rooster410
3 of a Kind
So, tell us more.. what did you do to get it working? Did you contact shuffle tech? I’ve tried calling them a bunch of times and can’t get ahold of anyone. Concerning….
BigCountryHateU
High Hand
Push to the bottom until it clicks then press and hold the 3 and 7 buttons for 2 seconds. That's what I was told to do when mine had a minor issue. This reset the shuffletech and its been running smooth since.
Email them. I got a response within a day.
From Manual:
Unjamming Shuffle Tech machines are designed to avoid jamming, but occasionally cards may jam inside the machine. If this happens, use your fingers to clear the cards. Once cards are cleared, begin purge mode by pressing and holding the (3) and (7) buttons simultaneously for 2 seconds. In rare cases you’ll need to remove cards from the center tray and between the center and side trays, and then push the center tray to the bottom position to access cards stuck in the side tray. You will hear a “clicking” sound as you push the elevator down; this is OK, the machine is designed to allow this tray to be pushed down manually to access the side trays. Once cards are clear, press and hold the (3) and (7) buttons simultaneously for 2 seconds to begin purge mode and reset the machine.
https://www.slotsdirect.com/manuals/shuffletechManual.pdf
Unjamming Shuffle Tech machines are designed to avoid jamming, but occasionally cards may jam inside the machine. If this happens, use your fingers to clear the cards. Once cards are cleared, begin purge mode by pressing and holding the (3) and (7) buttons simultaneously for 2 seconds. In rare cases you’ll need to remove cards from the center tray and between the center and side trays, and then push the center tray to the bottom position to access cards stuck in the side tray. You will hear a “clicking” sound as you push the elevator down; this is OK, the machine is designed to allow this tray to be pushed down manually to access the side trays. Once cards are clear, press and hold the (3) and (7) buttons simultaneously for 2 seconds to begin purge mode and reset the machine.
https://www.slotsdirect.com/manuals/shuffletechManual.pdf
This is everything you need to know. If this doesn't work & tray stays at bottom then you need to send it back. Email "Chip" @shuffletech & he'll make you answer some questions first to be sure you've tried everything. You'll have it back in under 2 weeks.
Yeah I have the manual and was emailing chip. Shuffler is packaged up headed back to him.
Thx!!!
jamesjkim
Flush
Full price or used?
jamesjkim
Flush
I like shuffling and dealing, I think it's good to learn. Having one dealer at a table, or a shuffler , sure it speeds the game up, but if you are the lone dealer, you miss some aspects of gameplay.
notice a lot of people are worried about speed here...
i think these run in the $5k+ range.
if you are, you're better off getting a dealer to worth for tips from your local casino.
they know the rules, the game will be very very fast, they could help with recruitment at times, to list a few reasons to get one.
i think these run in the $5k+ range.
if you are, you're better off getting a dealer to worth for tips from your local casino.
they know the rules, the game will be very very fast, they could help with recruitment at times, to list a few reasons to get one.
OP
OP
They run about $750 from their direct website. That is still a crazy amount of money to spend but to be completely honest I'm not worried about my return on investment if it makes my game play better. $750 for a shuffler would be a significant purchase for me, but I look at it as a toy rather than investment. I think they're cool. I break most of my non essential purchases down to is it worth x amount of hours of over time ? if it is Ill buy it lol.
i must be thinking of shuffle master!
Rakrul
Straight
If side rollers aren't working I'd guess the o-ring jumped off.
Epic fail!!!!
Got the shuffle tech and cabinet (ikea).
I cute the rectangle in the top of the ikea cabinet. And…
1/2” too long and destroyed the entire top.
So off to ikea to get another cabinet.
Got the shuffle tech and cabinet (ikea).
I cute the rectangle in the top of the ikea cabinet. And…
1/2” too long and destroyed the entire top.
So off to ikea to get another cabinet.
For anyone who did the cut yourself, is the 45 degree angle cut on the short sides required?
Rooster410
3 of a Kind
Ordered mine today! Hope to have it ready to go by next weekend.
Thanks
Rooster410
3 of a Kind
Doesn’t the flush mount kit come with a template?
It sure does, though the template has rounded corners. I cut right angles.
It's IKEA - can't you just buy a new top? (I thought they sold individual parts from the Customer Service side)
Create an account or login to comment
You must be a member in order to leave a comment
Create account
Create an account and join our community. It's easy!
Log in
Already have an account? Log in here.
