• This site contains affiliate links. If you choose to make a purchase after clicking a link, Poker Chip Forum may receive a commission at no additional cost to you. Thank you for your support!

Sale Made-to-order Custom Table Toppers (43 Viewers)

revwistein said:
Storage question: is anyone hanging their topper for storage? Will it deform/stretch under its own weight while hanging?

I have a topper in transit. I am thinking of using something like pants hangers with the clips (or clamp a small clamp or binder clips), with the hanger (or other the alternatives) hanging against from a wall-mounted hook. If anyone is doing something similar, I'd like to hear your experiences.

The rail for my table is a separate piece, and will set on top of the table topper. The outer inch or so of the topper will be hidden from view under the rail, so I am not worried about clamp marks on the edge.
Click to expand...

I have a topper on order for my DIY table (with removable rail and folding legs) and I plan to staple the topper to the table surface for a more permanent installation.
 
I am horrible with illustrator. Can someone make me a simple roulette layout with room on the side for a 20" wheel? I will pay! I really wanna order one of these for my Barrington table!
 
rjdev7 said:
I'm excited to announce a partnership with a new vendor who will be able to supply made-to-order table toppers to the US and Europe.

All existing stock designs and sizes (including those compatible with the Barrington / ESPN oval tables) that have been previously offered are available, and will arrive within a time period of approximately 3-4 weeks from the time of purchase.

​
​
These can be ordered in any shape or size up to a max length of 114” and a max width of 48".

A few considerations:
  1. Thickness: The thickness of these toppers is 2mm.
    If you're using these directly on a dining table, it is advised to get some closed cell foam or other method of padding (read through the thread for examples of what folks have used successfully) to put under the toppers.
    Possible Solution: "Blank" toppers (empty / no print) can be purchased as the same size as your topper for 30% discount. This would allow you to use it as padding underneath your topper if you feel 2mm is not thick enough. You could also buy two printed toppers and put one under the other.
  2. Quality: The print quality and quality control (e.g. dimension accuracy to 1/2") are better than the vendor I was using in China for the bulk orders. The colors are very vibrant, with little bleed, and the dimensions are more precise.
  3. Sewn Edges: It's possible to have sewn edges for a small added fee. Take this for what it's worth, but if you're using these toppers to fit within an existing table like a Barrington, an ESPN table, or some other existing table, I would recommend NOT doing edge stitching as the look is much cleaner than having the edges showing around the inside of the rails on the table
  4. Shape: There's no restriction on shapes. For instance, you can do round / circle toppers, rectangle toppers, octagon, ellipse, oval toppers, etc.
  5. Size: The new vendor supports any topper up to a maximum length of 114" and maximum width of 48"
  6. Price
    Un-sewn Edges: $135 shipped for standard sizes**
    Sewn Edges: $145 shipped for standard sizes**
    ** Size Premium: There will be a $2.50 per square foot premium for toppers that exceed the standard Barrington dimensions (73.5 x 31.5) which I will calculate at the time of order.
    Custom Art: Custom designs will come at a $10-50 premium depending on the extent of customization required. Payment for the topper + custom designs will be required before designs take place. If there is a change of heart and you do not look to purchase the topper after seeing the designs, I will refund you the amount minus my design fee.
    Here is a     blank template in Adobe Illustrator if anyone would like to design your own art and send to me.
To place an order, please PM me with the description of the design & the dimensions of the topper you would like.

If you have questions, feel free to respond here so my answers are seen by all. Thank you!

Here’s a video showing how well cards slide on the toppers:
Click to expand...
These look amazing - is there no way to get a larger one - I have a dinning table that is 3.2m/124 inches but these would otherwise be perfect!?
 
LeroyBrown873 said:
These look amazing - is there no way to get a larger one - I have a dinning table that is 3.2m/124 inches but these would otherwise be perfect!?
Click to expand...
These can be ordered in any shape or size up to a max length of 114” and a max width of 48".
 
Quickplaya said:
I am horrible with illustrator. Can someone make me a simple roulette layout with room on the side for a 20" wheel? I will pay! I really wanna order one of these for my Barrington table!
Click to expand...
Send me a DM when you get enough posts
 
rjdev7 said:
3-4 weeks upon time of order
Click to expand...
I tried searching the thread but didn’t see the answer so I apologize if this was answered already- Can I send you a logo to put on an insert for the Costco Harrington table and if so, are there minimum requirements for that logo (I.e. size/resolution/etc)? I will DM once I reach the 3 posts.
 
Picked up open box Costco Barrington, will definitely be hitting you up for a topper fam
 
Purchased a Costco Barrington table with LED lights for son, he has Bellagio Tribute Chip Set, what toppers do have Bellagio themed?

Please post images in thread if you can.

Thanks
 
1736109660128.png


Have done it in blue as well

1736109774786.png
 
Has anybody dealt with one of these and flush mounting a card shuffler? Would it be difficult to get a clean hole cut for it? Obviously not the greatest but curious if anybody's already tackled the issue or not. Or this could just be one of those "pick one" moments.
 
demonnic said:
Has anybody dealt with one of these and flush mounting a card shuffler? Would it be difficult to get a clean hole cut for it? Obviously not the greatest but curious if anybody's already tackled the issue or not. Or this could just be one of those "pick one" moments.
Click to expand...
It’s very easy to cut these with a pair of scissors. People have cut cupholders out of them in the past without issue. You’d be fine doing this for the shuffler.
 

Create an account or login to comment

You must be a member in order to leave a comment

Create account

Create an account and join our community. It's easy!

Register

Log in

Already have an account? Log in here.

Similar threads

iLogik
In Progress (ordering closed) Table Toppers - Group Buy
10 11 12
Replies
343
Views
15K
Quickplaya
Q
iLogik
Interest Barrington Table Toppers - Group Buy
2 3
Replies
70
Views
5K
iLogik
iLogik
Nickamas
What size table do you think I can get?
Replies
5
Views
487
Labrat
L
TheOffalo
Not Mine Fake Aces 70" x 35" rectangular poker table topper with nice carrying case for $25!
Replies
13
Views
813
TheOffalo
TheOffalo
rjdev7
[Interest] Custom Table Topper Sizes
2
Replies
34
Views
4K
CrustyPatina
C
Back
Top Bottom