Wanted Multiple pairs of various RHC solids (1 Viewer)

[Psypher1000]

I'm looking for two pairs of assorted colors of chips. The chips *must* meet the following criteria...

- RHC mold
- Solids
- New/uncirculated or VERY slightly used condition.

I greatly prefer inlaid, but hot stamps can be made to work as well.

I don't care if they are value or NCV, roulette or tournament, promotional or otherwise. I don't care what property they're for. I don't care what denomination they are. For my purposes I'd prefer common/cheap/easy to obtain chips, though. Fracs work plenty fine if they're cheap and available.

Yes, they must come in pairs. Each pair must be the same chip (or, in the case of roulette chips, must come from the same property - not necessarily the same table). If you have four of the same chip, that also works. I'm also looking for specific Paulson hues if at all possible. Some may be easier to find than others, but let's see what's out there. For each color, the hues are listed in order of preference with those at the top being the most preferred.

If you have anything available, please email me with the chips you have, quantities available, and prices. Thanks in advance.

Blueish
Horizon Blue
Light Blue
Aqua

Redish
Watermelon
Cherry
Radiant Red

Purpleish
Fuschia
Plum
Lilac

Greenish
Lime Green
Lemon Green
Sherbet Green

Yellowish
Daisy
Yellow
Canary Yellow

Pinkish
Hawaii Flower
Light Pink
Pink

Greyish
Grey
Offwhite
Showboat Grey

 

[MegaTon44]

Pairs huh? You building some sort of RHC ark?

Good luck with the search!

 

[Psypher1000]

You building some sort of RHC ark?

These 38mm cardboard disks need upgraded.

 

[FDLmold]

Wits and Wagers!

 

[FDLmold]

Did you get the Vegas Wits & Wagers from the Kickstarter?

 

[Psypher1000]

Did you get the Vegas Wits & Wagers from the Kickstarter?

I have base, party, and Vegas, yes. Tube was beat to hell, but all the contents survived.

 

[FDLmold]

I got two Vegas, one for me, one for resale. One tube did well, the other went SMUSH. I like where you are going with this.

 

[FDLmold]

Blank CPC FDL molds would work too. I'm combining sets to make a 13-player game possible. 3 each of 13 colors would be ideal.

 

[FDLmold]

This has been percolating in the back of my mind for a few months now. Last week I was getting some samples of ceramics from GOCC anyway, so I got samples of their unicorn chips, and they will work perfectly for this. 14 colors available. With some GEAR labels (or ABC when they get up and running) I'm ready to go with my 13 player set.

 

[Psypher1000]

I’ll keep that in mind as a possible option. I’m waiting until the convention before I make a final decision. Would be interested to see the color options available vs the colors of the game once you get your samples.

 

[FDLmold]

I will post a picture sometime.

 

[FDLmold]

Took some pics today. Need to scan the pieces and have @Gear turn them into labels so I can make my 13-player set. I will have one or two awkward colors, but the rest will be Jim Dandy.

 

[Psypher1000]

Need to scan the pieces and have @Gear turn them into labels so I can make my 13-player set.

the colors could definitely work.

I love me some Gear labels so no disrespect to him, but the Unicorns don't have a recess to my recollection. Obviously we're not worried about spinner with these, but it's something to consider. Also, if the surfaces are textured then you might not get a good seal between the label and the chip.

What about the possibilty of ordering some already hot-stamped appropriately? Yes, would be more expensive due to the cost of the dies, but might not be a bad option to consider, especially if you/we can resell the extras on BGG. Could potentially have the 100's stamped in silver and 200's stamped in gold. Just spitballin' here.

 

[v1pe]

NERDS!

I've thought about upgrading my wits and wagers...can't remember which version I have, but I don't get it to the table enough. Frankly I'm not really sold on the game.

Cool upgrade though, the unicorns seem like a good option. Even though it's not my favorite game, I might have to spring for an upgrade kit if you do get some for resale. Just cause I'm a junkie like that.

 

[Psypher1000]

NERDS!

Till the day I die. PALLADIN FO' LIFE!!!

 

[FDLmold]

No idea what GOCC ordering minimums are. I'd bet they have a $100 stock die. I'd bet they do NOT have a $200 stock die.

Then again, if you upgrade the chips to the game, you can have the two bets be any value, such as $5 and $10, or $1 and $2, which probably are stock dies.

I'll send GOCC a message if I get the inclination.

And the unicorn chips have a SLIGHT recess. The surface is fairly smooth. I have no doubt a GEAR label would stick just fine. I got three of each so you can have your 100 bet, your 200 bet, and a chip that lets everybody know which chips are yours.