Nanuk 910 = 400 chip perfection (7 Viewers)

[Benniffer]

Just wanted to share my Nanuk 910 chip case. This thread was a huge inspiration towards getting what I believe is the best chip storage option for a T5 tournament set.

Literally has the perfect amount of storage for 340 chips (100x$5, 100x$25, 70x$100, 50x$500, 20x$1000), two decks of cards, big and small blind buttons, dealer button, and card protector token.

Thank you all for the discussion and examples shared in this thread. It was very valuable for somebody who just started getting nicer chips (I've had dice chips all my life until just recently).

 

[TimmyK54]

For my babies - 800 chips in Justin racks in my Nanuk 915 with a strap.

View attachment 1297649View attachment 1297650

If you took out the foam in the middle, would you be able to squeeze in a deck of cards?

 

[Darson]

If you took out the foam in the middle, would you be able to squeeze in a deck of cards?

Easily

 

[Defarse]

Bump for the best 400 chip case on the market, and for a few colors on sale at $39.99:

https://www.amazon.com/Nanuk-Waterp...6966206&sprefix=nanuk+910,aps,170&sr=8-3&th=1

https://www.amazon.com/Nanuk-Profes...6966206&sprefix=nanuk+910,aps,170&sr=8-2&th=1

 

[BirdCage]

Thanks! I grabbed a color I didn’t already have - bright yellow.

 

[OneGearManySpeeds]

Bump for the best 400 chip case on the market, and for a few colors on sale at $39.99:

https://www.amazon.com/Nanuk-Waterproof-Hard-Case-Insert/dp/B00BP8URVS?crid=3HOWFDKRDJWDR&dib=eyJ2IjoiMSJ9.Nm-6OM9UFsXUtWNri6TrF5GuekyIp3oIshL4r1uBZMmWOf8MxUJdSzXxRhcSCT4bdzqMAicmgwJ3agp-wZVP-k6C8Iq8M3cdT5-fDODyJb4xTP3OIcyRRx_JMMY0emB9i9zqep8SXVkKJB2FFV0g00SHClvAo5Jw0cMjYK6qi4y666uFIxnjURWto9CDPc8-dXfUtRSrjkoD4zlzl_bnHv17nWe_yYmiQLpCkqlHbAY.D52GZEofNnV38w5QdeHAhXxlwRRsLQjrMVAo6G0MedE&dib_tag=se&keywords=nanuk+910&qid=1736966206&sprefix=nanuk+910,aps,170&sr=8-3&th=1

https://www.amazon.com/Nanuk-Professional-Military-Waterproof-Shockproof/dp/B00BP8UPKG?crid=3HOWFDKRDJWDR&dib=eyJ2IjoiMSJ9.Nm-6OM9UFsXUtWNri6TrF5GuekyIp3oIshL4r1uBZMmWOf8MxUJdSzXxRhcSCT4bdzqMAicmgwJ3agp-wZVP-k6C8Iq8M3cdT5-fDODyJb4xTP3OIcyRRx_JMMY0emB9i9zqep8SXVkKJB2FFV0g00SHClvAo5Jw0cMjYK6qi4y666uFIxnjURWto9CDPc8-dXfUtRSrjkoD4zlzl_bnHv17nWe_yYmiQLpCkqlHbAY.D52GZEofNnV38w5QdeHAhXxlwRRsLQjrMVAo6G0MedE&dib_tag=se&keywords=nanuk+910&qid=1736966206&sprefix=nanuk+910,aps,170&sr=8-2&th=1

Thanks. I grabbed two green ones.

 

[BirdCage]

Planning to use my incoming Nanuk with a pending Tina order. The case is outstanding for my 700 chip grail set, should hold 400 Tina hybrids well enough!

 

[OneGearManySpeeds]

Wow these cases came next day delivery. Testing them with 8 racks. Using the small layer of foam on the bottom and placing it in the lid only, makes for a really tight fit but it closes. Should I be concerned about the chips being directly up against this foam? What should I use in the lid?

I’ve not plucked the foam yet. Just testing the height

 

[OneGearManySpeeds]

Planning to use my incoming Nanuk with a pending Tina order. The case is outstanding for my 700 chip grail set, should hold 400 Tina hybrids well enough!

View attachment 1447839

Do you have photos of the insert for cards? Did you buy that or is it 3d printed?

 

[BirdCage]

PCF member @One Eyed Dollar ran a 3D printing business for some time. I got a couple from him. They are perfect compliments to the Nanuk cases.

Another pic.

Also, @One Eyed Dollar did provide design files for some of his creations - info here.

 

[BirdCage]

Two days later…yellow pops!!!