GB Completed PCFDBGB07 - DEALER BUTTONS!!! ACCESSORY CHIPS!!! (1 Viewer)

Status
Not open for further replies.

Himewad

Straight Flush
Supporter
Joined
Feb 6, 2019
Messages
8,286
Reaction score
27,078
Location
Iowa, USA
THIS GROUP BUY WILL BE CLOSED TO NEW ORDERS AT MIDNIGHT ON SUNDAY, JANUARY 22!!!

I have run a number of large dealer button group buys over the past couple of years. It's time to run the next one!

Most of the dealer button artwork has a rolling edge design. In order to get the rolling edge printed, there is a minimum order quantity (MOQ) of 10 (ten) per design. If we do not reach this MOQ, we will not get the rolling edge printed (it will be plain white). That said, I don't expect the MOQ to be a problem for this group buy.

PRICING
  • 60mm dealer buttons (items A thru W) - $5.50 each
  • 47mm accessory chips (items MM thru XX) - $1.35 each
The buttons and chips will be produced by our go-to site vendor BR Pro Poker on their 60mm (DBs) and 47mm (chips) ceramic blanks. In addition to the prices listed above, most items will be charged a $0.50 royalty fee per button and a $0.10 royalty fee per accessory chip that will go directly to the designers (items A thru S and MM thru SS plus XX).

At the end of this post, you can view the list of DB items that are on the PCFDBGB07 menu (items A thru W). The list of accessory chips can be found in post #2. The order charts are displayed beginning with post #3 of this thread.

ORDERING

If you wish to participate in this group buy, please place your order in the following manner:
A x 1
C x 2
BB x 10


If you need to revise your order, please post a new comment to this thread with your changes. Do not edit your original post or it may get missed.

DEADLINE


I plan to stop taking new orders at midnight on Sunday, January 22.
Once orders have stopped, I will begin to collect payments. The order will be placed with BR Pro Poker once all payments have been collected. Ideally, the order should be paid in full within a few days of requesting payments, and it should be another 3-4 weeks until I receive the order. Then, I will need another few days to a week to get everyone's orders packed up and shipped out.

SHIPPING

I am totally willing to ship internationally, but as we all know, there is a higher cost and a higher degree of risk with those shipments compared to CONUS shipping. I strongly suggest using a USA re-shipper just because small packages aren't cost-efficient, and they seem to take much longer than larger packages. I am willing to follow up with the USPS to try to track down slow domestic and international shipments, but once I give you your tracking number, there isn't much else I can do.

CONUS shipping:
  • 1 to 2 buttons will be $4.50 in a bubble mailer
  • 3 to 5 buttons will be $5.50 in a bubble mailer
  • 6 to 10 buttons will be $6.50 in a bubble mailer
  • 11 to 30 buttons will be $9.50 in a SFRB
(for shipping purposes, 1 x 60mm dealer button is roughly equivalent to 2.17 x 47mm chips)

INTERNATIONAL shipping:

  • up to 8 ounces (5 or 6 DBs) is around $10 to $15 currently
  • over 8 ounces and up to 2 pounds is around $20 to $30 currently
  • over 2 pounds starts getting crazy

PCFDBGB07 MENU

A - ALADDIN (burgundy) ... 60mm
Aladdin - BURGUNDY.jpg


B - SAHARA (cream) ... 60mm - different image on each side

Himewad Dealer Button-PRINT_Sahara 1.jpg


C - SAHARA (brown) ... 60mm
Himewad Dealer Button-PRINT_Sahara 2.jpg


D - SAHARA (black) ... 60mm
Himewad Dealer Button-PRINT_Sahara 3.jpg


E - SANDS (silver) ... 60mm
Sands - SILVER.jpg


F - SANDS (black) ... 60mm
Sands - BLACK.jpg


G - ROYAL PRINCESS (white) ... 60mm
Royal Princess - WHITE.jpg


H - ROYAL PRINCESS (red) ... 60mm
Royal Princess - RED.jpg


I - BALLY'S (white) ... 60mm
Bally's - WHITE.jpg


J - BALLY'S (purple) ... 60mm
Bally's - PURPLE.jpg


K - BINION'S HORSESHOE (white) ... 60mm
Binion's Horseshoe - WHITE.jpg


L - THE CHATEAU (white) ... 60mm
Chateau - WHITE.jpg


M - JUMER'S (blue) ... 60mm
N - JUMER'S (yellow) ... 60mm

Jumer's - BLUE & YELLOW.jpg


O - TROPICANA (white) ... 60mm
P - TROPICANA (green) ... 60mm

Tropicana - WHITE & GREEN.jpg


Q - SANTA YSABEL (cream) ... 60mm
Santa Ysabel - CREAM.jpg


R - CHESTERFIELD CLUB (white) ... 60mm
Chesterfield Club - WHITE.jpg


S - KING'S CROWN (white) ... 60mm
King's Crown - WHITE.jpg


T - PLAYER'S (white) ... 60mm
Players - WHITE.jpg


U - MARGARITAVILLE (white) ... 60mm - plain white rolling edge
Margaritaville - WHITE.jpg


V - OPUS CASINO (purple) ... 60mm - rolling edge will be purple w/ gray text
W - OPUS CASINO (gray) ... 60mm - rolling edge will be gray w/ purple text
Opus Casino - PURPLE & GRAY.jpg
 
Last edited:
ACCESSORY CHIP IMAGES

ITEM MM - JUMER'S (bounty) ... 47mm
Jumer's - BOUNTY.jpg


ITEM NN - JUMER'S (all in) ... 47mm

Jumer's - ALL IN.jpg


ITEM OO - TROPICANA (bounty) ... 47mm
Tropicana - BOUNTY.jpg


ITEM QQ - SANTA YSABEL (bounty) ... 47mm

Santa Ysabel - BOUNTY.jpg


ITEM RR - CHESTERFIELD CLUB (bounty) ... 47mm
Chesterfield Club - BOUNTY.jpg


ITEM SS - KING'S CROWN (bounty) ... 47mm
King's Crown - BOUNTY.jpg


ITEM VV - OPUS CASINO (bounty) ... 47mm

Opus Casino - BOUNTY.jpeg


ITEM WW - OPUS CASINO (all in) ... 47mm
Opus Casino - ALL IN.jpeg


ITEM XX - STFU GROUNDSKEEPER WILLIE ... 47mm
Willie - STFU.jpg
 
Last edited:
ORDER CHART

PCF member​
A​
B​
C​
D​
E​
F​
G​
H​
I​
J​
K​
L​
M​
N​
O​
P​
Q​
R​
S​
T​
U​
V​
W​
MM​
NN
OO​
QQ​
RR​
SS​
VV​
WW​
XX​
Total
DBs​
Total
Chips​
Himewad12111111111111111111111202420
ThinkingFold2240
DeusEx121210610
TheOffalo211111180
azwccc1120
opengun111140
iballman110
Poker4ever2240
sampoker1230
calfdemon220220
Don Clay1120
eightyWon222210810
Lucky4111101010330
Jackstraw111111113222410102120
warewulf110
krafticus1120
justsomedude440
Silver_Fiend111690
PickinPockets11240
grantc5411111111221111111111111250
BluffaloBill22260
Pony11111111101010830
MikesDad220
Colquhoun1025035
Knoxymoron110
Benjaminotaur1133323223887
inapinch1120
MichaelBubly111111222
flipupchipup33220820
BearMetal11111111202020860
TrillAK1120
turboj6231111111111111111111111110101010101010102023100
TheHun550
Littleluck552310510
Solid Snake242306836
Nuhockey11111111111111111111111102310
Suited Connector11111111111111111111111202320
NotRealNameNoSir505
5bucks110
grandmeme11112244
AZBOARDER131120
Asmodeus11111111111111111161
BlueChipSpecial11111111111111111111111230
ovo111111161
roofingman211221120201020870
softchewy22150
brewdawg111111121010920
Justin Olson11111144111111111111111290
sheikh617111140
PAGE 1 SUBTOTAL1920121711152218121323821241214122420132710119059513030814242216378641
 
Last edited:
ORDER CHART (continued)

PCF member
A​
B​
C​
D​
E​
F​
G​
H​
I​
J​
K​
L​
M​
N​
O​
P​
Q​
R​
S​
T​
U​
V​
W​
MM​
NN​
OO​
QQ​
RR​
SS​
VV​
WW​
XX​
Total
DBs​
Total
Chips​
BEANO52315315
Mojo131210010
Statesvegas11111111111111111111111110533105
gmansbu1112212
Jeff111111111111111111311115032553
JMC93891111111120820
lrapley11111111111111201420
JWJ111140
BarrieJ3221160
asam20061120
mugenpowr1110105225
nbro210210
PAGE 2 SUBTOTAL4534225555725514434634221010137010500053101270
PAGE 1 SUBTOTAL1920121711152218121323821241214122420132710119059513030814242216378641
TOTAL ORDER23251521131727231718301026292618152826163112131006918830401314242269479911
 
Last edited:
reserved for anything else I may have forgotten :cool
 
@Himewad If it's not too late to make a suggestion, since some of these designs weren't posted on your interest thread, I'd recommend getting rid of the "brown" top/bottom "edge spots" on the Tropicana Evansville DBs. Each denom chip has a different edge spot, so having no edge spots would distinguish the DB further.

The DBs' edge spot look like it's based on the $100 or maybe $1000 label, but for a DB I don't think it's necessary and may even look weird since the rolling edges don't show the spot (and wouldn't be aligned anyway).

(Also, the "INDIANA" in the white version, if it wants to match the chip label, is actually in the same "gold" color as the edge spot. I personally like it in white, but thought I'd mention.)

I recreated the label for alternate denoms for this set, if whoever designed the DB doesn't want to make the mods, I can provide replacement art for the DB if you agree with my suggestion (I'd probably also change "DEALER" on the white version to green instead of the gold).

Edit: I see @Colquhoun designed it (and may others in this run). Not a criticism of his always excellent work by any means, just my opinion....
 
@Himewad If it's not too late to make a suggestion, since some of these designs weren't posted on your interest thread, I'd recommend getting rid of the "brown" top/bottom "edge spots" on the Tropicana Evansville DBs. Each denom chip has a different edge spot, so having no edge spots would distinguish the DB further.

The DBs' edge spot look like it's based on the $100 or maybe $1000 label, but for a DB I don't think it's necessary and may even look weird since the rolling edges don't show the spot (and wouldn't be aligned anyway).

(Also, the "INDIANA" in the white version, if it wants to match the chip label, is actually in the same "gold" color as the edge spot. I personally like it in white, but thought I'd mention.)

I recreated the label for alternate denoms for this set, if whoever designed the DB doesn't want to make the mods, I can provide replacement art for the DB if you agree with my suggestion (I'd probably also change "DEALER" on the white version to green instead of the gold).

Edit: I see @Colquhoun designed it (and may others in this run). Not a criticism of his always excellent work by any means, just my opinion....

Fair points. I will tag @Colquhoun and if he wishes to make those revisions, he is free to do so.
 
Excellent work by all the artists! Though I do also wish some of the designs that are the same on each side and has "DEALER" in the rolling edge an even number of times like the Aladdin DB (but not the Jumers or Trops or SY) have "DEALER" alternating upside-down like the Sahara, Chesterfield, and King's Crown DBs, but that's just me being nitpicky. :ROFL: :ROFLMAO:
 
Hi,

I x 1
U x 1

Those will be shipped to Conus.

Thank you for running this awesome GB.
 
Thank you for running this buy, your efforts are appreciated!

A x 1
B x 1
C x 1
D x 1
E x 1
F x 1
I x 1
J x 1
K x 3
M x 2
N x 2
Q x 2
S x 4
 
@Himewad If it's not too late to make a suggestion, since some of these designs weren't posted on your interest thread, I'd recommend getting rid of the "brown" top/bottom "edge spots" on the Tropicana Evansville DBs. Each denom chip has a different edge spot, so having no edge spots would distinguish the DB further.

The DBs' edge spot look like it's based on the $100 or maybe $1000 label, but for a DB I don't think it's necessary and may even look weird since the rolling edges don't show the spot (and wouldn't be aligned anyway).

(Also, the "INDIANA" in the white version, if it wants to match the chip label, is actually in the same "gold" color as the edge spot. I personally like it in white, but thought I'd mention.)

I recreated the label for alternate denoms for this set, if whoever designed the DB doesn't want to make the mods, I can provide replacement art for the DB if you agree with my suggestion (I'd probably also change "DEALER" on the white version to green instead of the gold).

Edit: I see @Colquhoun designed it (and may others in this run). Not a criticism of his always excellent work by any means, just my opinion....

@Colquhoun is at your service! He made the requested changes and the updated images have been posted to the OP.
 
@Colquhoun is at your service! He made the requested changes and the updated images have been posted to the OP.
The only thing I left alone was the color of the "Indiana" on the white button. I originally tried it in gold, but the value was so close to the green background that it got lost. White seemed a bit too bright, so I just toned it back a bit.
 
Status
Not open for further replies.
Back
Top Bottom