• This site contains affiliate links. If you choose to make a purchase after clicking a link, Poker Chip Forum may receive a commission at no additional cost to you. Thank you for your support!

In Progress (ordering closed) PCFDBGB10 - GREATEST HITS (part 2) (39 Viewers)

OK - I have the final tallies on our orders, and we have made some good progress. Unfortunately, a number of items didn't come close to meeting the MOQ requirements to qualify for rolling edge printing. A summary of those items (and the people who ordered them) is listed below:
If you are tagged here, please let me know how you want to proceed with these items. As of right now, I am inclined to remove the items that are not in BOLD type above, because a plain white rolling edge would look bad IMO. For the same reason, I am inclined to leave the items above that are in BOLD type above, because a plain white rolling edge would look fine on a white dealer button.

I am planning to finalize this order and begin sending out payment requests either today (if I have time), or on Monday morning (more likely). I have a busy weekend, so it's unlikely that I will have time to send payment requests over the next couple of days.
 
Last edited:
Himewad said:
OK - I have the final tallies on our orders, and we have made some good progress. Unfortunately, a number of items didn't come close to meeting the MOQ requirements to qualify for rolling edge printing. A summary of those items (and the people who ordered them) is listed below:
If you are tagged here, please let me know how you want to proceed with these items. As of right now, I am inclined to remove the items that are not in BOLD type above, because a plain white rolling edge would look bad IMO. For the same reason, I am inclined to leave the items above that are in BOLD type above, because a plain white rolling edge would look fine on a white dealer button.

I am planning to finalize this order and begin sending out payment requests either today (if I have time), or on Monday morning (more likely). I have a busy weekend, so it's unlikely that I will have time to send payment requests over the next couple of days.
Click to expand...
And just for clarity on Turtles/Dunes, I designed them specifically to not have a rolling edge & one currently doesnt exist - liked them better that way!
 
Himewad said:
OK - I have the final tallies on our orders, and we have made some good progress. Unfortunately, a number of items didn't come close to meeting the MOQ requirements to qualify for rolling edge printing. A summary of those items (and the people who ordered them) is listed below:
If you are tagged here, please let me know how you want to proceed with these items. As of right now, I am inclined to remove the items that are not in BOLD type above, because a plain white rolling edge would look bad IMO. For the same reason, I am inclined to leave the items above that are in BOLD type above, because a plain white rolling edge would look fine on a white dealer button.

I am planning to finalize this order and begin sending out payment requests either today (if I have time), or on Monday morning (more likely). I have a busy weekend, so it's unlikely that I will have time to send payment requests over the next couple of days.
Click to expand...
I'm good with my original order :tup:
 
I'm good with keeping my order the same (the buttons r just for reference will be replaced with acrylic ones after seating is done). No modifications on my end.
 
Himewad said:
OK - I have the final tallies on our orders, and we have made some good progress. Unfortunately, a number of items didn't come close to meeting the MOQ requirements to qualify for rolling edge printing. A summary of those items (and the people who ordered them) is listed below:
If you are tagged here, please let me know how you want to proceed with these items. As of right now, I am inclined to remove the items that are not in BOLD type above, because a plain white rolling edge would look bad IMO. For the same reason, I am inclined to leave the items above that are in BOLD type above, because a plain white rolling edge would look fine on a white dealer button.

I am planning to finalize this order and begin sending out payment requests either today (if I have time), or on Monday morning (more likely). I have a busy weekend, so it's unlikely that I will have time to send payment requests over the next couple of days.
Click to expand...
@Himewad @Rakrul
Me and Rakrul have pooled our orders, I am the one having the Horseshoe objects. Feel free to remove the D1 Dealer Button from Rakrul's order.
Unless @Jackstraw and @Bmercado908 decides to change their order to D1. In that case, please increase my order of D1 to reach the MOQ (6 maximum).

Edit: And please ass 20 x HH2 as well to the order :)
 
C4 - Big Top Joker remove flopalopagus unless we can get to the min required.
F2 - Remove Flopalopagus
G3 - Rebel Helmet - remove Flopalopagus
I1 - Spider Man remove Flopalopagus
I3 - Hulk (black) remove Flopalopagus
I4 - Hulk (purple) remove Flopalopagus
L1 - Margaritaville remove Flopalopagus
M1 - DDLM (horse) remove Flopalopagus
M2 - DDLM (guitar) remove Flopalopagus
O1 - New York Mets remove Flopalopagus

@Himewad - Can’t thank you enough for coordinating all of this. It’s must be a beast!
 
Flopalopagus said:
C4 - Big Top Joker remove flopalopagus unless we can get to the min required.
F2 - Remove Flopalopagus
G3 - Rebel Helmet - remove Flopalopagus
I1 - Spider Man remove Flopalopagus
I3 - Hulk (black) remove Flopalopagus
I4 - Hulk (purple) remove Flopalopagus
L1 - Margaritaville remove Flopalopagus
M1 - DDLM (horse) remove Flopalopagus
M2 - DDLM (guitar) remove Flopalopagus
O1 - New York Mets remove Flopalopagus

@Himewad - Can’t thank you enough for coordinating all of this. It’s must be a beast!
Click to expand...
How about the MM3 chips (47mm "That's All In")? We have enough of the 49mm DB version (item R1) now, so maybe you don't want both?
 
MC_CPA said:
I'm good with keeping my order the same (the buttons r just for reference will be replaced with acrylic ones after seating is done). No modifications on my end.
Click to expand...
Just to be clear, you are OK with me removing items S5 through S9 (the dealer buttons)? Or you want them made with a white rolling edge?
 
I am comfortable with a white edge on those dealer buttons and would still like these thanks. Please keep them in the order.

Please don't remove s5 to s9. Ill still pay for them.

Thank you for personally buying additional s1 to s4 buttons to meet the threshold.

It doesnt matter for me because they're just used so people know where the corresponding chips go.

Thanks!
 
Himewad said:
How about the MM3 chips (47mm "That's All In")? We have enough of the 49mm DB version (item R1) now, so maybe you don't want both?
Click to expand...
Do we have enough for the rolling edge? If not I might buy more for it to happen. Having both is good by me. Plan is to use one as a dealer button occasionally and the other as a throw your all in chip in for stuffs and giggles. :)

Only 1 R1 for me though. Also, I though that the r1 was 60 mm is it not? I’ll still take 1 anyway.
 
Flopalopagus said:
Do we have enough for the rolling edge? If not I might buy more for it to happen. Having both is good by me. Plan is to use one as a dealer button occasionally and the other as a throw your all in chip in for stuffs and giggles. :)

Only 1 R1 for me though. Also, I though that the r1 was 60 mm is it not? I’ll still take 1 anyway.
Click to expand...
No, the R1 was originally designed as a 49mm button, and that's how it remained in this group buy.

We only have your 10 MM3 chips right now, so I will up your order to 20 to meet the MOQ for that item unless you tell me different.
 
Himewad said:
No, the R1 was originally designed as a 49mm button, and that's how it remained in this group buy.

We only have your 10 MM3 chips right now, so I will up your order to 20 to meet the MOQ for that item unless you tell me different.
Click to expand...
Yep. Thanks.
 
MC_CPA said:
I am comfortable with a white edge on those dealer buttons and would still like these thanks. Please keep them in the order.

Please don't remove s5 to s9. Ill still pay for them.

Thank you for personally buying additional s1 to s4 buttons to meet the threshold.

It doesnt matter for me because they're just used so people know where the corresponding chips go.

Thanks!
Click to expand...

I'll be honest: as of the last time I checked the spreadsheet I really didn't think that the S1 - S4 suited dealer buttons had any chance whatsoever of making the MOQ. But since they did meet the threshold then I suppose I might as well throw a set of them onto my order. I'll likely never even end up using the darn things, but given that I'm getting sets of all the suited seating chips (LL1 - LL4) I feel like I'll probably regret not tacking on the matching dealer buttons as well.

And what's another $22.00 right? Hell, that's not even enough to cover a decent bar tab LOL! But good grief... what started off as like an $11.00 order of just 2 dealer buttons somehow morphed into a behemoth $120.00 order. I swear this group buy turned out to be like going into Costco or Sam's Club for "just one item." :wtf: :ROFL: :ROFLMAO:

In any event, my full revised (and hopefully final this time!) order is below. Thanks again for organizing this @Himewad!

H1 - James Bond Casino Royale DB x 4
H2 - James Bond Casino de Isthmus City DB x 1
S1 - Hearts DB x 1
S2 - Clubs DB x 1
S3 - Diamonds DB x 1
S4 - Spades DB x 1
LL1 - Spades Seating Chips x 1 set
LL1 - Spades Star Extra Chip x 1
LL2 - Hearts Seating Chips x 1 set
LL2 - Hearts Star Extra Chip x 1
LL3 - Diamonds Seating Chips x 1 set
LL3 - Diamonds Star Extra Chip x 1
LL4 - Clubs Seating Chips x 1 set
LL4 - Clubs Star Extra Chip x 1
 
Bikshu said:
I'll likely never even end up using the darn things, but given that I'm getting sets of all the suited seating chips (LL1 - LL4) I feel like I'll probably regret not tacking on the matching dealer buttons as well.
Click to expand...
Knowing my players they will somehow find a way to seat two different suits at the same table without the buttons so having the buttons to guide them is good.
 
MC_CPA said:
Knowing my players they will somehow find a way to seat two different suits at the same table without the buttons so having the buttons to guide them is good.
Click to expand...

I always used cards for seating....(old decks or cheap decks) now instead I can put A-10 of each suit on the middle of a table as the suit indicator, then 4 Jack's, queens, kings and any jokers on the middle of tables 5-8 if that occurs.

(Fixed for spelling)
 
We are getting close. I just need to hear back from a few more people, and then we'll be ready to close up the ordering portion of this group buy.

I think one big takeaway from this group buy is that future ones will have a much more limited menu. It's just too much work maneuvering around MOQs with so many great options available.

But anyway, like I mentioned before, let's lock down the order this weekend, and you can all expect to receive payment requests beginning on Monday.
 

Create an account or login to comment

You must be a member in order to leave a comment

Create account

Create an account and join our community. It's easy!

Register

Log in

Already have an account? Log in here.

Similar threads

Himewad
  • Locked
GB Completed MATSUI plaque racks
2
Replies
59
Views
2K
Himewad
Himewad
Salmonblaster
In Progress (ordering closed) Top Hat Flamingo (THF) Dealer Button Group Buy
2 3
Replies
69
Views
4K
TheHun
TheHun
Himewad
  • Locked
SOLD MATSUI plaque racks
Replies
6
Views
131
Highli99
Highli99
Himewad
  • Locked
GB Completed PCFDBGB09 - GREATEST HITS (dealer buttons & accessory chips)
9 10 11
Replies
319
Views
20K
Himewad
Himewad
Himewad
  • Locked
SOLD ROUNDERS dealer buttons (CINEMA SET)
Replies
20
Views
826
Himewad
Himewad
Back
Top Bottom