Marius L
4 of a Kind
白 龙 扑克 房What does the hanzi characters mean? Certainly it's too much for just "the white dragon"
Love the result though! Excellent choice of chips!
bái lóng pūkè fáng
白 bái White
龙 lóng dragon
扑克 pūkè Poker
房 fáng House/room
-
This site contains affiliate links. If you choose to make a purchase after clicking a link, Poker Chip Forum may receive a commission at no additional cost to you. Thank you for your support!
Testimonials (51 Viewers)
- Thread starter Wifey
- Start date
bái lóng pūkè fáng
白 bái White
龙 lóng dragon
扑克 pūkè Poker
房 fáng House/room
Gavin
Flush
Thank you! The characters stand for "White Dragon Poker Room". It's on my cut card, which I'll share shortly...What does the hanzi characters mean? Certainly it's too much for just "the white dragon"
Love the result though! Excellent choice of chips!
Lucks7Shadow
Two Pair
I need to get a little better at application since my first time haha, but I absolutely love the labels, they look great!
Communication, work up and shipment all went very smoothly and im very happy with the results. Thank you!
Communication, work up and shipment all went very smoothly and im very happy with the results. Thank you!
Attachments
- Joined
- Mar 24, 2021
- Messages
- 2,146
- Reaction score
- 5,454
Fantastic. Those colors work really well in that set.
Well done! That's a keeper set.
Clarence,
Are they murdered or labeled over? They look great either way
- Joined
- Mar 24, 2021
- Messages
- 2,146
- Reaction score
- 5,454
Thanks ◡̈ These are overlabels (for now). Textured full inlay replacement for keepers to match the other Aztars.Clarence,
Are they murdered or labeled over? They look great either way
Dodger
Flush
Can’t say enough good things about @Gear and @Wifey. Awesome to work with and fantastic labels.
First job they did for me was labels for 43mm Royals. (About 4 years ago and still holding strong.)
Next, I needed some member chips done, and when I decided to relabel some Strat $1’s, I turned to @Gear.
And you can’t run a league without some champion chips. (More relabels.)
And finally, decided to add some seating chips, and went back to the Royals (and @Gear) for these.
As stated, labels are top notch. But, it was great to work with top notch human beings as well in @Gear and @Wifey.
Thank you!!!
First job they did for me was labels for 43mm Royals. (About 4 years ago and still holding strong.)
Next, I needed some member chips done, and when I decided to relabel some Strat $1’s, I turned to @Gear.
And you can’t run a league without some champion chips. (More relabels.)
And finally, decided to add some seating chips, and went back to the Royals (and @Gear) for these.
As stated, labels are top notch. But, it was great to work with top notch human beings as well in @Gear and @Wifey.
Thank you!!!
Grandmasturkey
Flush
Wow. Just gorgeous. Great job gear and wifey and great eyeballs to put this together bloop!
Thanks @Gear and @Wifey for El Borracho labels! My second go around for a custom re-label set and couldnt be happier with your level of service and product!
100 RPC $5s still to be labeled as I decided to get an extra rack recently but the El Borracho set is now complete with Tiger Palace NCV in the fold.
I know this is a Gear testimonial thread but a well deserved shout out to @LeGold for the custom dice, @Buge for running cut card group buys, @Johnny5 for designs, @Josh Kifer for milling and @all (too many to list) for the chips!
100 RPC $5s still to be labeled as I decided to get an extra rack recently but the El Borracho set is now complete with Tiger Palace NCV in the fold.
I know this is a Gear testimonial thread but a well deserved shout out to @LeGold for the custom dice, @Buge for running cut card group buys, @Johnny5 for designs, @Josh Kifer for milling and @all (too many to list) for the chips!
TudiscoKid
Pair
Hi guys,
I don't know if this is the right place to ask this: what type of label should I get for Royal Card Rooms?
I don't know if this is the right place to ask this: what type of label should I get for Royal Card Rooms?
If you are talking about a manufacturer of custom labels for poker chips the only answer as far as I'm concerned is @Gear.
They have a vendor page with lots of information. Obviously you can check out this thread for lots of examples of completed projects and how PCF feels about the quality of the labels and the service on offer (spoiler alert: it's exceptional).
They have a vendor page with lots of information. Obviously you can check out this thread for lots of examples of completed projects and how PCF feels about the quality of the labels and the service on offer (spoiler alert: it's exceptional).
TudiscoKid
Pair
Yeah I'm talking about Gear, they have 3 different types of label, I don't know which would be best.
Reach out to @Wifey. She can walk you through the options.
OneGearManySpeeds
Flush
Do you have any photos with the SY 2 frac with the jacks? I’d love to see the progression or splash pots. Pm is fine as well. Impressive.Thanks Gear and Wifey ◡̈
HSI 1A overlabel and HSI $25 (Jack Cinci $25)
PCA $1 (Horseshoe Tunica $1)
JACK Detroit frac (SY $2)
Paris frac (Bally $1), $25 (VLV $25) and $100 (Sterling $100)
OneGearManySpeeds
Flush
What did you use for this pink frac? Milled something?
OneGearManySpeeds
Flush
What RHC yellow chip with brown edge spots did you use for this frac?
They are milled Shareton Roulettes.
https://www.pokerchipforum.com/threads/split-pricing-720-chip-indiana-grand-set.100785/#post-2091190
I had bought them already milled.
OneGearManySpeeds
Flush
Looking for the background on this chip. Looking for nickels for a Jack Detroit set and this thread is insane. These look amazing, what chip was it prior to the project?
OneGearManySpeeds
Flush
Wow, these look really nice, Would love to run into a rack like that only light blue or something that would work with Jack Detroit. thanks for the reply.
They are Microsoft/Michael Ginsburg chips. Older school RHC chips which are leaded. You can see some of the original chips here. The inlay sizes are a bit larger than modern RHC chips so Gear had to measure them to get a better match on sizes.
https://www.pokerchipforum.com/thre...d-genuine-harolds-club-h-mold-cash-set.98505/
OneGearManySpeeds
Flush
Wow what did you use for the solid quarter as a base chip? these look really nice. is that Arc Yellow?Happy to be able to post in this thread. These came out great
OneGearManySpeeds
Flush
Wow I've never seen those chips. They look stellar.
OneGearManySpeeds
Flush
OneGearManySpeeds
Flush
What did you use for the card guard solids? where'd you get the chips? I've not seen any like This for RHC, is that arc yellow?My new 25c Crystal park ! thank's Chris
card guard for my poker clubperfect style
Nex
Flush
billkell
High Hand
Chiming in here to say that I am another extremely satisfied customer!
Working with Andrea and Chris was an absolute treat!
Their communication was stellar, and the labels turned out even better than I expected. They really worked with me to nail the color matching!
Well worth the wait (which they were open and accurate about).
Working with Andrea and Chris was an absolute treat!
Their communication was stellar, and the labels turned out even better than I expected. They really worked with me to nail the color matching!
Well worth the wait (which they were open and accurate about).
wickedwonka121
Flush
Grandmasturkey
Flush
Create an account or login to comment
You must be a member in order to leave a comment
Create account
Create an account and join our community. It's easy!
Log in
Already have an account? Log in here.
Similar threads
