-
This site contains affiliate links. If you choose to make a purchase after clicking a link, Poker Chip Forum may receive a commission at no additional cost to you. Thank you for your support!
Testimonials (24 Viewers)
- Thread starter Wifey
- Start date
Poker Zombie
Royal Flush
How could I forget about this thread...
Labels arrived 2 days before the annual Zombie Hall of Fame event (not the fault of Gear, but the nearly 20 days from postmark to arrival). New Inductee gets their image on 10 chips. Sure, this is a small potatoes order for Gear, but he has been willing to produce them so I can celebrate the players that made my club great.
Gear laminated labels on CPS chips.
Labels arrived 2 days before the annual Zombie Hall of Fame event (not the fault of Gear, but the nearly 20 days from postmark to arrival). New Inductee gets their image on 10 chips. Sure, this is a small potatoes order for Gear, but he has been willing to produce them so I can celebrate the players that made my club great.
Gear laminated labels on CPS chips.
Another order received from Chris. The turnaround time was 1 or 2 days at the most. Shipping arrived 6 days earlier than the Post Office tracking said they would!
Labels came out beautiful as always.
I’ll be busy tonight!!! Pron of the whole set soon I hope.
Thanks again.
View attachment 160508
OMG 99 labels to a sheet. I soooo tilted right now.
Heh
It's actually more like 126, 160, or 198 to a sheet when they're printed, and I cut them down to 9x12 (ish) to fit in the Tyvek shipping envelopes.The numbers depend on size:
126 = 9 rows of 14 (e.g. 1.125")
160 = 10 rows of 16 (e.g. 1")
198 = 11 rows of 18 (e.g. 0.875")
Rhodeman's labels were for CPC inlay replacement, so nominally 0.875", 198 per print, two sheets of 9 x 11 labels.
Rhodeman77
Straight Flush
I didn’t get a whole of labels on tonight, almost 1 rack 
Here is a little preview.
Here is a little preview.
OP
OP
No such thing as a "small potatoes" order.
Lots of "small potatoes" add up.
Just ask the folks in Charlottetown PEI.
AfterTheFact
4 of a Kind
I found a small Cow Creek hoard but no $25’s until Gear worked his magic.
@Gear did absolutely incredible work with my Top Hat Cafe set. The pictures I have really don't do the labels justice. What's even better than that is that he worked with me to size the labels by sending me samples back and forth! Everyone knows that Chris is the man to go to for labels, but I figured I would add yet another A+ grade to his growing list!
Attachments
^ Don't undersell those, that is an awesome set!
Actual conversation with a buddy of mine tonight, whom I was showing my relabel projects. Made me LOL.
Me: [hands him a few chips] "This is the finished product."
Him: "What do you mean 'finished product?' "
Me: "Those were milled and the label was put on."
Him: "Wait this really has a label on it?"
Me: [shows him a blank milled chip and sheet of labels]
Him: "Holy &#$% you can't tell!"
@Gear put in a ton of work to get these just right and sent me I-can't-even-count how many free samples. He not only happily put up with my nitpicking down to a few thousandths of an inch adjustments, over and over, but even suggested these sizing samples to dial it in perfectly.
Quick pic of the first rack done, sorry for horrible quality. I'll get some better pron when everything is done.
Actual conversation with a buddy of mine tonight, whom I was showing my relabel projects. Made me LOL.
Me: [hands him a few chips] "This is the finished product."
Him: "What do you mean 'finished product?' "
Me: "Those were milled and the label was put on."
Him: "Wait this really has a label on it?"
Me: [shows him a blank milled chip and sheet of labels]
Him: "Holy &#$% you can't tell!"
@Gear put in a ton of work to get these just right and sent me I-can't-even-count how many free samples. He not only happily put up with my nitpicking down to a few thousandths of an inch adjustments, over and over, but even suggested these sizing samples to dial it in perfectly.
Quick pic of the first rack done, sorry for horrible quality. I'll get some better pron when everything is done.
OP
OP
I LOL'ed when I saw this...If you only knew how nit picky he is about his own stuff!
Gear is a puzzle fan. Each job is it's own puzzle, and to find the solution is a huge satisfaction.
The harder and more complex the puzzle, the more satisfying the solution, no matter how many steps it took to solve it.
I love those Empress designs, and look forward to more pr0n.
RichMahogany
Straight Flush
bivey
Full House
Ahhhhh, indeed! With the small exception that there are no Olivia’s quarters!
RichMahogany
Straight Flush
Exactly! I knew that, but if I wasn’t a chipper, I would’ve thought they were 100% original casino fracs
bivey
Full House
Exactly! I knew that, but if I wasn’t a chipper, I would’ve thought they were 100% original casino fracs
Your point is spot on. Gear is the man. His workmanship is unparalleled.
DrStrange
4 of a Kind
Me too! ! ! Gear does great work.
Garden City ones relabeled into Aztar quarters. (not the best picture)
It is not a trivial fast task to do relabels at home. I suspect Gear has a jig rather than doing them by hand like I did. 120 chips was something like a 90 minute project spread out because it was hard to stay tightly focused enough to get the placement exactly right. But once done, the relabeled chips worked out great.
I'll note that chips Gear does in house are better than what I can do applying the stickers myself. You can't tell an in-house relabel + laminated chip is not part of the original chip set. The home done labels easily pass an in-game test but are visibly a relabeled chip facing careful examination. But sending the chips to Canada and back plus the extra cost from Gear makes inhouse work something like 5x more expensive. The self applied stickers are quite a bargain.
DrStrange
Garden City ones relabeled into Aztar quarters. (not the best picture)
It is not a trivial fast task to do relabels at home. I suspect Gear has a jig rather than doing them by hand like I did. 120 chips was something like a 90 minute project spread out because it was hard to stay tightly focused enough to get the placement exactly right. But once done, the relabeled chips worked out great.
I'll note that chips Gear does in house are better than what I can do applying the stickers myself. You can't tell an in-house relabel + laminated chip is not part of the original chip set. The home done labels easily pass an in-game test but are visibly a relabeled chip facing careful examination. But sending the chips to Canada and back plus the extra cost from Gear makes inhouse work something like 5x more expensive. The self applied stickers are quite a bargain.
DrStrange
Nice. Did you mill these yourself and apply a laminated label?
No they were inlay chips, I removed the inlays and replaced with the Gear labels
Poker Zombie
Royal Flush
I can't wait for my next Gear delivery either... and I haven't even sent it yet!
But I know it will happen...
But I know it will happen...
I always cheap out and go with the no tracking shipping. And I always regret it not knowing when those pretty new labels are going to arrive. THE SUSPENSE...
LOL looking to move these before I even have them all labeled. If interested hit me up. will have them posted for sale tonight or tomorrow. ( I will label them all before they are shipped out.)
Jambine
Full House
Great job on the color match
Kyle
Full House
Create an account or login to comment
You must be a member in order to leave a comment
Create account
Create an account and join our community. It's easy!
Log in
Already have an account? Log in here.
