US/CAN BATCH 5 ADD ONS No new sets. (7 Viewers)

[cpac54]

The faster I pay the sooner you ship??? I'm logged in to Paypal right now.

 

[TX_Golf_N_Poker]

View attachment 800523

So you are saying that PayPal has a logout feature???

 

[SeanGecko]

Just so everyone knows I took off this Saturday from work, lots of reasons, but I will be able to pack this stuff up and get them out so be prepared to get a bunch of messages over this Thursday and Friday. Cheers.

 

[Pinkdan]

Just so everyone knows I took off this Saturday from work, lots of reasons, but I will be able to pack this stuff up and get them out so be prepared to get a bunch of messages over this Thursday and Friday. Cheers.

 

[SeanGecko]

43mm Cards mold is 35¢ 30¢


Saying that here ......for no reason at all

 

[LeLe]

43mm Cards mold is 35¢


Saying that here ......for no reason at all

They are 30c each if Order reach > 20,000

Totally not Hinting at all

 

[SeanGecko]

That must have been an old quote I had put up there. It was from before they made the mold I think. Thanks!

 

[LeLe]

Haha Welcome.

This is the updated Pricing, we are currently at the midst of doing a small 43mm GB

 

[SeanGecko]

I just got that too I need to look at my messages. Doing a small buy to get my TOURNAMENT chips. I will do a legit big buy in January so the prices can go down cause shipping is expensive it seems.

 

[LeLe]

Ya Large Shipping have increased 30% over past 3 months in Asia. It is expected to keep increasing until Feb 2022 according to my sources from Logistics Department

 

[SeanGecko]

Ya Large Shipping have increased 30% over past 3 months in Asia. It is expected to keep increasing until Feb 2022 according to my sources from Logistics Department

Okay scratch that next order will be in March 2022

 

[LeLe]

Okay scratch that next order will be in March 2022

Judging on how long a Card Mold order will take from start to shipment,

You should start the order now and your shipment will be in time by March 2022

 

[SeanGecko]

Judging on how long a Card Mold order will take from start to shipment,

You should start the order now and your shipment will be in time by March 2022

Let me get all the 39mm bastards out of here first.

 

[SeanGecko]

Just got my 43 mm Cards Mold samples.... Wow

 

[Blacksox1]

Dibs on a single

 

[SeanGecko]

They are bricks. Definitely a doing a tourney set. Can't wait to get the $20's redone in 43mm cards mold

 

[SeanGecko]

Dibs on a single

I'll send one in your box

 

[liftapint]

Just got my 43 mm Cards Mold samples.... Wow View attachment 801699View attachment 801700View attachment 801701

Would love a single too if you have another spare. Pretty sure I am going to need a set of those too

 

[SeanGecko]

Would love a single too if you have another spare. Pretty sure I am going to need a set of those too

Will do!

 

[Chipnut]

If you’ve got one more to spare….

 

[Schmendr1ck]

I just got my add-on yesterday, and had a chance to unwrap them tonight. The only chip I had printed in both runs was the lime green NCC nickel.

There is a noticeable improvement in print quality for batch 5. The print is sharper, and the light colored background is less grainy. If I can get a decent side-by-side shot later, I'll post it.

Thanks a million @SeanGecko for making this happen (again)!

 

[dkellerd]

And if you got another 43mm to spare…

They look awesome…and I’d happily pass it along to the next guy.

 

[SeanGecko]

I should sent the shuffle stack around. I have 12 so I can give out 2 and send the ten around.

 

[Schmendr1ck]

There is a noticeable improvement in print quality for batch 5. The print is sharper, and the light colored background is less grainy. If I can get a decent side-by-side shot later, I'll post it.

So here's the side by side I promised. Old chip (batch ???) on the left, new batch 5 chip on the right.

As I mentioned before, the printing on the newer chips appears sharper, and the background is less grainy/mottled. Also, the printing didn't get down into the "inlay" ring on the old chips like it does on the new ones. All changes for the better IMO.

Also, did anyone else notice that the batch 5 chips are on a new mold? The cards on the batch 5 chips are slightly skinnier and have rounded corners.

 

[TX_Golf_N_Poker]

Also, did anyone else notice that the batch 5 chips are on a new mold? The cards on the batch 5 chips are slightly skinnier and have rounded corners.

There was a lengthy discussion about this in one of the MANY CM threads. If I remember which one, I'll post a link.

 

[AnteAndy]

So here's the side by side I promised. Old chip (batch ???) on the left, new batch 5 chip on the right.

As I mentioned before, the printing on the newer chips appears sharper, and the background is less grainy/mottled. Also, the printing didn't get down into the "inlay" ring on the old chips like it does on the new ones. All changes for the better IMO.

Also, did anyone else notice that the batch 5 chips are on a new mold? The cards on the batch 5 chips are slightly skinnier and have rounded corners.

The rounder card corners are the original chips I first received from Bosco, and easily the superior version. It also has a matte edge finish, and little to no spinners.

 

[LeLe]

Here are some more 43mm Card Mold Sample for BTP Tribute, they look stunning love the $5 $20 $100

 

[liftapint]

Here are some more 43mm Card Mold Sample for BTP Tribute, they look stunning love the $5 $20 $100

View attachment 802196

Are these available to the public to order? I am IN!

 

[AZBOARDER13]

Are these available to the public to order? I am IN!

Ditto

 

[LeLe]

BTP tribute is done by my Friend, I will need to ask him if he willing to open to public first

Also we from Singapore so there will need to be a GB or some sort with someone from US willing to start if not there will be a big shipment cost from China to US for small order