• This site contains affiliate links. If you choose to make a purchase after clicking a link, Poker Chip Forum may receive a commission at no additional cost to you. Thank you for your support!

***CLOSED*** Group Buy - Atlantic Club - CPC - Solid Hot Stamp A-Mold Tourney Set (9 Viewers)

Status
Not open for further replies.
Avatar updated!

AC-cpc-profile-1.jpg
 
justsomedude said:
Here are some splash pots (4 barrels of each color were used).

And I apologize for the colors in advance. These were taken on my cellphone in mixed lighting (tungsten and daylight), then toss in my phone's HDR-wonk-processing on top of that, and colors tend to get screwy...

View attachment 68401

View attachment 68402

View attachment 68403

View attachment 68404

View attachment 68405

View attachment 68406

View attachment 68407

View attachment 68408
Click to expand...

I love you.
 
Hey.... what are you guys using for racks for these? These CPCs aren't close to fitting any of my Paulson or Chipco racks. Not close at all. :(
 
justsomedude said:
Hey.... what are you guys using for racks for these? These CPCs aren't close to fitting any of my Paulson or Chipco racks. Not close at all. :(
Click to expand...
OMG, Awesome Avatar!!!

As for the racks, you need special 66.7 mm racks I think. CPC sells them and @dennis63 sells them as well!

I am about to order an additional 7 soon. They are $2.50 a piece I think?

LOVE THE AVATAR!!!
 
justsomedude said:
Hey.... what are you guys using for racks for these? These CPCs aren't close to fitting any of my Paulson or Chipco racks. Not close at all. :(
Click to expand...

CPCs A mold chips are generally 67.7 (at least my 3k chips are) and fit best into those sized racks, whereas the Paulson and Chipco racks come in at 66.7. I don't have any of these (anyone have an extra sample set they want to part with shoot me a PM...) so I can't say for sure, but my guess is you'll need to find 67.7 racks to accommodate this set.
 
justsomedude said:
Here are some splash pots (4 barrels of each color were used).

And I apologize for the colors in advance. These were taken on my cellphone in mixed lighting (tungsten and daylight), then toss in my phone's HDR-wonk-processing on top of that, and colors tend to get screwy...

View attachment 68401

View attachment 68402

View attachment 68403

View attachment 68404

View attachment 68405

View attachment 68406

View attachment 68407

View attachment 68408
Click to expand...

Purty chips! Or as MD Mike would say "Sexy Sensual I Want to Make Love Them to chips" :LOL: :laugh:
 
First off, David O sent me a sample set, and the packing job was second to none. Amazing care has been taken by David O, thanks so much for doing this. Putting together a group buy is a monumental task, and it appears he dominated it. Thanks, and have a great holiday season. As for the lucky ones who bought these sets, I am so impressed at how the chipes turned out, really beautifully stamped and the A mold is a rock star classic. If these can be done on 43 mm, I would be hard pressed not to get some.
 
justsomedude said:
I'm adding on. Already squaring things up with David Spragg. Shoot me a PM.
Click to expand...
i want to addon as well but i didn't expected it happen so fast... too fast for me. and i should probably wait till my original order arrives :LOL: :laugh:

edit:
if you could wait till end of january/begin of february i'm definitely in for min 100-200
 
MD Mike said:
OMG, Awesome Avatar!!!

As for the racks, you need special 66.7 mm racks I think. CPC sells them and @dennis63 sells them as well!

I am about to order an additional 7 soon. They are $2.50 a piece I think?

LOVE THE AVATAR!!!
Click to expand...

Mike: Our Key West racks are 67.7 mm. I've found them to be the best fit for 100 CPC chips. Several people here have tried them and have said they find them to be a good fit. .
 
BPTDirector said:
Is the 44mm A mold available.....

Would have loved to see 44mm 1k and up chips.
Click to expand...

justsomedude said:
I'm adding on. Already squaring things up with David Spragg. Shoot me a PM.
Click to expand...

ohama said:
i want to addon as well but i didn't expected it happen so fast... too fast for me. and i should probably wait till my original order arrives :LOL: :laugh:

edit:
if you could wait till end of january/begin of february i'm definitely in for min 100-200
Click to expand...


Actually I would like it even more to add-on on 44mm A-Mold (1k, 5k, 25k)

@David Spragg
is there any possibility to hot stamp the 44mm?
 
dennis63 said:
Mike: Our Key West racks are 67.7 mm. I've found them to be the best fit for 100 CPC chips. Several people here have tried them and have said they find them to be a good fit. .
Click to expand...
I have been using the racks you gave me for the Key West set for these and they fit perfectly! I will be requesting an order of 7 additional racks from you to cover my additional chips :)
 
ohama said:
if you could wait till end of january/begin of february i'm definitely in for min 100-200
Click to expand...

I'm in no rush, but with that said, my decision may depend on where CPC is with their molds. David responded to me last night that they could take an order for the addon now. If we wait until January, and another mold is in place, we might be waiting until spring for delivery.

Marius L said:
what, you're not keeping those beautiful dayglo yellow 5ks?
Click to expand...

I'm not sure yet. In starting stacks of T20k, the two 5k chips seem like they can be very easily confused with the T25s, especially for the color blind folks. They are pretty close. Not a huge deal, but if I can test out the white for a couple hundred bucks, I figure it's worth it just to see how they compare.
 
justsomedude said:
I'm in no rush, but with that said, my decision may depend on where CPC is with their molds. David responded to me last night that they could take an order for the addon now. If we wait until January, and another mold is in place, we might be waiting until spring for delivery.
Click to expand...
IIRC A mold is always in production so it wouldn't affect your order
 
ohama said:
Actually I would like it even more to add-on on 44mm A-Mold (1k, 5k, 25k)

@David Spragg
is there any possibility to hot stamp the 44mm?
Click to expand...

Impossible to hot stamp 44mm unless someone wants to stump up $35k for an extra hot stamp machine :)
 
Status
Not open for further replies.

Similar threads

Saoliver
  • Locked
SOLD Rainier Club Sample Sets to Support St. Jude Children’s Research Hospital
Replies
10
Views
705
Saoliver
Saoliver
MichaelBubly
Taking Orders Mini Paris LV + Shoreline Cut Card Group Buy (Bridge and Poker Sizes)
Replies
9
Views
681
buckeye09076
B
bluffnbandit
Need help designing a 1500pc poker set, willing to pay for design/chip ordering
Replies
7
Views
257
iLogik
iLogik
ski_ex5
  • Locked
SOLD Empress Star Tournament (NAGB Boat Chips - 2016) Paulson THC Four Chip Sample Set - 25-5,000
Ends 10-27-24 at 7:30 PM Eastern Time
Replies
29
Views
878
ski_ex5
ski_ex5
ski_ex5
  • Locked
SOLD Desert Sands (Cabazon, CA - 1959?) Spotted T.R. King (TRK) Small Crown Sample Set - 5x
Ends 10-06-24 at 8:30 PM Eastern Time
Replies
13
Views
580
ski_ex5
ski_ex5
Back
Top Bottom