• This site contains affiliate links. If you choose to make a purchase after clicking a link, Poker Chip Forum may receive a commission at no additional cost to you. Thank you for your support!

Sale Made-to-order Custom Table Toppers (41 Viewers)

Already thinking of what's next, but certainly very pleased with the new one...

IMG_6947.jpeg
IMG_6969.jpeg
 
Just throwing this up in the thread.. guys life is hectic at the moment - I was literally just working on Tangiers when I had to drive a dog into an emergency vet (she's ok - I mean she isn't, but it wasn't a new problem) through Arkansas's first and only snow of the year. So.. it's gonna be a minute.


As of now I have a semi commitment to @Flopalopagus to finish working on one for him, but if anyone else has a message into me - for the moment, I'm gonna be on a hiatus for a bit. Need a few weeks, maybe a month to just take care of life (and obviously degenerately play more cards than ever)

You guys can still feel free to offer my name up or message me if you're looking for something - just be aware for the next 3-5 weeks, it's likely to be a "get back with me in 3 to 5 weeks" lol



Side note: My chips should be in production in about 3-4 weeks, so I had to finally decide on my top.

Calypso Cardhouse Pub 01 Artboard 1.png
 
aaron2786 said:
Just throwing this up in the thread.. guys life is hectic at the moment - I was literally just working on Tangiers when I had to drive a dog into an emergency vet (she's ok - I mean she isn't, but it wasn't a new problem) through Arkansas's first and only snow of the year. So.. it's gonna be a minute.


As of now I have a semi commitment to @Flopalopagus to finish working on one for him, but if anyone else has a message into me - for the moment, I'm gonna be on a hiatus for a bit. Need a few weeks, maybe a month to just take care of life (and obviously degenerately play more cards than ever)

You guys can still feel free to offer my name up or message me if you're looking for something - just be aware for the next 3-5 weeks, it's likely to be a "get back with me in 3 to 5 weeks" lol



Side note: My chips should be in production in about 3-4 weeks, so I had to finally decide on my top.

View attachment 1256488
Click to expand...
It’s kind of rude to put real life before PCF don’t you think?
 
aaron2786 said:
Just throwing this up in the thread.. guys life is hectic at the moment - I was literally just working on Tangiers when I had to drive a dog into an emergency vet (she's ok - I mean she isn't, but it wasn't a new problem) through Arkansas's first and only snow of the year. So.. it's gonna be a minute.


As of now I have a semi commitment to @Flopalopagus to finish working on one for him, but if anyone else has a message into me - for the moment, I'm gonna be on a hiatus for a bit. Need a few weeks, maybe a month to just take care of life (and obviously degenerately play more cards than ever)

You guys can still feel free to offer my name up or message me if you're looking for something - just be aware for the next 3-5 weeks, it's likely to be a "get back with me in 3 to 5 weeks" lol



Side note: My chips should be in production in about 3-4 weeks, so I had to finally decide on my top.

View attachment 1256488
Click to expand...
So sorry to hear that man. Take care.
 
aaron2786 said:
Just throwing this up in the thread.. guys life is hectic at the moment - I was literally just working on Tangiers when I had to drive a dog into an emergency vet (she's ok - I mean she isn't, but it wasn't a new problem) through Arkansas's first and only snow of the year. So.. it's gonna be a minute.


As of now I have a semi commitment to @Flopalopagus to finish working on one for him, but if anyone else has a message into me - for the moment, I'm gonna be on a hiatus for a bit. Need a few weeks, maybe a month to just take care of life (and obviously degenerately play more cards than ever)

You guys can still feel free to offer my name up or message me if you're looking for something - just be aware for the next 3-5 weeks, it's likely to be a "get back with me in 3 to 5 weeks" lol



Side note: My chips should be in production in about 3-4 weeks, so I had to finally decide on my top.

View attachment 1256488
Click to expand...
Sorry to hear, take your time. Hope your pup is doing better!
 
rjdev7 said:
So sorry to hear that man. Take care.
Click to expand...
Ah it's all good, we found out she had cancer in her liver in November, we were happy she made it to Christmas, now it's been 8 weeks on and she's happy as a pig in crap everyday still. She just had a weird stumbling thing happen today was all. But I'm just kinda worn out at the moment and need a break from the side gig for a few
 
Oh cool. Looks good! I love the Mirage designs so I'm looking forward to seeing this one. It should help me figure out which direction to go on my next felt.
 
BruceWayne said:
Wet dish cloth with small amount of dawn.

Wipe dirty area, rinse cloth, wipe again. Air dries back to new!

Thanks for sharing the topper. Color looks way different from the mock-up, but certainly helpful to see.
Click to expand...
Had two or three spills the first time I used mine and they all came off lickety split with incredibly minimal effort. Can't wait to get another for my new table as well!
 
I would appreciate some advice/feedback from those who have already ordered a custom table topper. I have the (Walmart) Barrington LED table and want to send my designer the AI template, but I'm confused about a few things and I'm guessing she might be too:

1) When I open the template in Adobe Illustrator, the red line (which I assume is the table topper) extends beyond the rectangular black line. Is the red line or the black line the area to measure to for the edges of the table topper?

2) Is this template for the Barrington Table, or any table?

3) Will the curve be any different from brand to brand of table?

4) Some of the images posted by PCF members look like the bet line area was maybe thinner on the width than what it appears in the template. Is that the case for some of you, or did you just keep the center of the topper the size in the template? I've seen references in a Google search for the bet line to be "8-12 inches in from the rail".

I would appreciate any input here based upon your experience, especially if you received your topper and thought "If I did this over again I would..."

Thanks!

template screenshot.png
 
digirati said:
I would appreciate some advice/feedback from those who have already ordered a custom table topper. I have the (Walmart) Barrington LED table and want to send my designer the AI template, but I'm confused about a few things and I'm guessing she might be too:

1) When I open the template in Adobe Illustrator, the red line (which I assume is the table topper) extends beyond the rectangular black line. Is the red line or the black line the area to measure to for the edges of the table topper?

2) Is this template for the Barrington Table, or any table?

3) Will the curve be any different from brand to brand of table?

4) Some of the images posted by PCF members look like the bet line area was maybe thinner on the width than what it appears in the template. Is that the case for some of you, or did you just keep the center of the topper the size in the template? I've seen references in a Google search for the bet line to be "8-12 inches in from the rail".
Click to expand...

1) The red line is larger because it includes 1" of bleed. The black box ought to be the correct dimensions for a Barrington.

2) Barrington

3) Most tables are straight on the long side and have half circles on the ends. But this could certainly vary. Some people use ellipse tables, I think.

4) All designs could vary. I chose to shrink the betting area by about 1" on my second topper because it simultaneously give players more space and makes it easier for a dealer to reach bets on the line. Seems like a win-win, as long as you don't go too small.
 

Create an account or login to comment

You must be a member in order to leave a comment

Create account

Create an account and join our community. It's easy!

Register

Log in

Already have an account? Log in here.

Similar threads

iLogik
In Progress (ordering closed) Table Toppers - Group Buy
10 11 12
Replies
343
Views
15K
Quickplaya
Q
iLogik
Interest Barrington Table Toppers - Group Buy
2 3
Replies
70
Views
5K
iLogik
iLogik
Nickamas
What size table do you think I can get?
Replies
5
Views
482
Labrat
L
TheOffalo
Not Mine Fake Aces 70" x 35" rectangular poker table topper with nice carrying case for $25!
Replies
13
Views
803
TheOffalo
TheOffalo
rjdev7
[Interest] Custom Table Topper Sizes
2
Replies
34
Views
4K
CrustyPatina
C
Back
Top Bottom