• This site contains affiliate links. If you choose to make a purchase after clicking a link, Poker Chip Forum may receive a commission at no additional cost to you. Thank you for your support!

Sale Made-to-order Custom Table Toppers (75 Viewers)

General rule of thumb, create a rectangle to 2 inches bigger than the dimensions you need it to be (1” of bleed around the outside edge of the whole topper), and increase the corner radius to maximum in all 4 to make the oval. I generally then subtract 18” from the target length and width (not including the bleed) to arrive at the betting area oval (9” race track)
 
Another bandwagon jumper of the Walmart deal for the LED Barrington here. I have one Barrington already for which I upgraded to SSC a few years ago (and looking to do cupholders next), but for the one that just arrived I was hoping to get one of these beautiful toppers. Custom chips and matching topper are a bit down the road, but for now I have a nice Majestic collection from @Apache that we throw around. Has anyone ordered or seen a Majestic Card Room topper that will match these chips or can one be made @rjdev7 ? Not sure how that would work and if permission would be needed, but it would be pretty cool if you could.
 
hard58core said:
Another bandwagon jumper of the Walmart deal for the LED Barrington here. I have one Barrington already for which I upgraded to SSC a few years ago (and looking to do cupholders next), but for the one that just arrived I was hoping to get one of these beautiful toppers. Custom chips and matching topper are a bit down the road, but for now I have a nice Majestic collection from @Apache that we throw around. Has anyone ordered or seen a Majestic Card Room topper that will match these chips or can one be made @rjdev7 ? Not sure how that would work and if permission would be needed, but it would be pretty cool if you could.
Click to expand...
Sorry I haven't been able to respond to your ask before on the Majestic themed topper. Currently no designs exist for that. If Majestic artwork is a proprietary thing owned by @Apache (I'm not sure) I wouldn't be able to make the toppers for it. That being said, there are plenty of really nice looking generic designs that you could pair with them (e.g. royal family, blank / non labeled designs, etc.)
 
For @Flopalopagus who was looking for a personal take on a Bellagio theme

Tuckman HoC copy 01 Artboard 1.png
 
rjdev7 said:
Sorry I haven't been able to respond to your ask before on the Majestic themed topper. Currently no designs exist for that. If Majestic artwork is a proprietary thing owned by @Apache (I'm not sure) I wouldn't be able to make the toppers for it. That being said, there are plenty of really nice looking generic designs that you could pair with them (e.g. royal family, blank / non labeled designs, etc.)
Click to expand...
I'm sure it's been asked and answered before but I couldn't find where if it has, is this also an issue if someone creates the artwork for NFL, MLB, or other professional or college sports teams using logos and such? If not, I know you don't do the artwork but if someone would be willing to create me one featuring the KC Chiefs I'd be greatly appreciative.
 
aaron2786 said:
Ah it's all good, we found out she had cancer in her liver in November, we were happy she made it to Christmas, now it's been 8 weeks on and she's happy as a pig in crap everyday still. She just had a weird stumbling thing happen today was all. But I'm just kinda worn out at the moment and need a break from the side gig for a few
Click to expand...

Sending good vibes over. We appreciate your dedication to the PCF community.. my shihtzu is turning 16 this year and the last 8 months has been rough with extreme weight loss and probably early dementia.
 
rjdev7 said:
Sorry I haven't been able to respond to your ask before on the Majestic themed topper. Currently no designs exist for that. If Majestic artwork is a proprietary thing owned by @Apache (I'm not sure) I wouldn't be able to make the toppers for it. That being said, there are plenty of really nice looking generic designs that you could pair with them (e.g. royal family, blank / non labeled designs, etc.)
Click to expand...
I understand. I just didn't know how it worked, because I recall seeing Pharaoh, Dia Del Los Muertos, Dunes, and Tiki Kings among your designs. But I'll figure something out and be getting back to you soon with an idea.
 
Anyone build a table with a rail that clamps down on these so you can have swappable "felts"? I'm about to start a new table build, and was thinking of having my default felt on the table, but building the rail in a way that can clamp down on an outer 1-2" of material on these toppers so I can swap/clean/replace as needed.
 
Order 74 x 32" for my Barrington LED table. Measured and it still is about 0.5"+ short in length, width is perfect. Mistake I made was measuring from leather to leather padding and not from LED strip to LED strip. Better to use the kind of tape measure tailors use rather than a hard tape measure, that way one can get a precise measurement. Still looks amazing, but would have preferred perfect fit. Next time.
 
Last edited:
hammonje said:
Better to use the kind of tape measure tailors use rather than a hard tape measure, that way one can get a precise measurement.
Click to expand...
Alternatively, you can measure to a fixed point in the middle from both sides and add the two measurements for a precise number.
 
hammonje said:
Order 74 x 32" for my Barrington LED table. Measured and it still is about 0.5"+ short in length, width is perfect. Mistake I made was measuring from leather to leather padding and not from LED strip to LED strip. Better to use the kind of tape measure tailors use rather than a hard tape measure, that way one can get a precise measurement. Still looks amazing, but would have preferred perfect fit. Next time.
Click to expand...
Doesn’t it allow for the lights to shine nicely on the felt? My fears are that 74.25 x 32.25 would cover sup the LEDs too much.
 
Prefer the width fit where it comes right up to the lights. The length gap bothers me, but no one else would ever notice. The lights are so darn bright would be an advantage to lessen the brightness a bit. Some LED diffuser material on this table would have been most welcome. Still looks amazing for sure, quite the upgrade. Ordered casino style poker chairs from Alibaba at less than the half price of other vendors. Can't wait to get my home game rocking.

Jacks_Casino_Topper.jpg



Poker_chairs.jpg
 

Create an account or login to comment

You must be a member in order to leave a comment

Create account

Create an account and join our community. It's easy!

Register

Log in

Already have an account? Log in here.

Similar threads

iLogik
Taking Orders Table Toppers - Group Buy
2 3
Replies
63
Views
1K
BaroneSanitation
BaroneSanitation
iLogik
Interest Barrington Table Toppers - Group Buy
2 3
Replies
70
Views
4K
iLogik
iLogik
Nickamas
What size table do you think I can get?
Replies
5
Views
443
Labrat
L
TheOffalo
Not Mine Fake Aces 70" x 35" rectangular poker table topper with nice carrying case for $25!
Replies
13
Views
740
TheOffalo
TheOffalo
rjdev7
[Interest] Custom Table Topper Sizes
2
Replies
34
Views
4K
CrustyPatina
C
Back
Top Bottom