• This site contains affiliate links. If you choose to make a purchase after clicking a link, Poker Chip Forum may receive a commission at no additional cost to you. Thank you for your support!

Vendor Sale Made-to-order Custom Table Toppers (39 Viewers)

NotRealNameNoSir said:
Measure your table. That's the only answer. That variation is why you're getting mixed answers, because the tables have some difference in length. We cannot tell you exactly how long/wide your table is. Measure it, and cut some off if you need to.
Click to expand...
Crap. I have 4 of them. Guess I have to make sure I measure each one to be safe!
 
So who has experience cutting less than an inch? I’ve cut a topper previously and the long edge was tough to keep straight. Appreciate any advice to do it better.

Agree that Barringtons are not one size fits all and vary enough to notice an incorrectly sized topper.
 
jamesjkim said:
So who has experience cutting less than an inch? I’ve cut a topper previously and the long edge was tough to keep straight. Appreciate any advice to do it better.

Agree that Barringtons are not one size fits all and vary enough to notice an incorrectly sized topper.
Click to expand...
High quality sewing shears?
 
IMG_4791.jpeg

I ordered one a couple months ago and like it so much I got this for a friend! Always surprised with how quickly these toppers get delivered. It fits perfectly. Thanks! I will definitely be ordering more.
 
rjdev7 said:
I'm excited to announce a partnership with a new vendor who will be able to supply made-to-order table toppers to the US and Europe.

All existing stock designs and sizes (including those compatible with the Barrington / ESPN oval tables) that have been previously offered are available, and will arrive within a time period of approximately 3-4 weeks from the time of purchase.

​
​
These can be ordered in any shape or size up to a max length of 114” and a max width of 48".

A few considerations:
  1. Thickness: The thickness of these toppers is 2mm.
    If you're using these directly on a dining table, it is advised to get some closed cell foam or other method of padding (read through the thread for examples of what folks have used successfully) to put under the toppers.
    Possible Solution: "Blank" toppers (empty / no print) can be purchased as the same size as your topper for 30% discount. This would allow you to use it as padding underneath your topper if you feel 2mm is not thick enough. You could also buy two printed toppers and put one under the other.
  2. Quality: The print quality and quality control (e.g. dimension accuracy to 1/2") are better than the vendor I was using in China for the bulk orders. The colors are very vibrant, with little bleed, and the dimensions are more precise.
  3. Sewn Edges: It's possible to have sewn edges for a small added fee. Take this for what it's worth, but if you're using these toppers to fit within an existing table like a Barrington, an ESPN table, or some other existing table, I would recommend NOT doing edge stitching as the look is much cleaner than having the edges showing around the inside of the rails on the table
  4. Shape: There's no restriction on shapes. For instance, you can do round / circle toppers, rectangle toppers, octagon, ellipse, oval toppers, etc.
  5. Size: The new vendor supports any topper up to a maximum length of 114" and maximum width of 48"
  6. Price
    Un-sewn Edges: $125 shipped for standard sizes**
    Sewn Edges: $135 shipped for standard sizes**
    ** Size Premium: There will be a $2.50 per square foot premium for toppers that exceed the standard Barrington dimensions (73.5 x 31.5) which I will calculate at the time of order.
    Custom Art: Custom designs will come at a $10-50 premium depending on the extent of customization required. Payment for the topper + custom designs will be required before designs take place. If there is a change of heart and you do not look to purchase the topper after seeing the designs, I will refund you the amount minus my design fee.
    Here is a     blank template in Adobe Illustrator if anyone would like to design your own art and send to me.
To place an order, please PM me with the description of the design & the dimensions of the topper you would like.

If you have questions, feel free to respond here so my answers are seen by all. Thank you!

Here’s a video showing how well cards slide on the toppers:
Click to expand...
Hello, how do I order.
 
aaron2786 said:
Alright some new stuff after @doctorchips was looking for a Grand Casino Gulfport and a Rio Tournament tribute, and @triton was looking for designs for an Aladdin and a Golden Nugget (his are rectangular, but I finished out standard Barrington sizes for anyone interested)

View attachment 1252055View attachment 1252056View attachment 1252057View attachment 1252058
Click to expand...
Big thanks to @aaron2786 and @rjdev7 — super smooth process from start to finish and these came out awesome!!
IMG_1254.jpeg
IMG_1248.jpeg
 

Create an account or login to comment

You must be a member in order to leave a comment

Create account

Create an account and join our community. It's easy!

Register

Log in

Already have an account? Log in here.

Similar threads

rjdev7
Wanted Chipco Regency $100
Replies
5
Views
322
rjdev7
rjdev7
DaneWoj
  • Locked
SOLD 3 Barrington Table Toppers
Replies
10
Views
716
UncleSalty
UncleSalty
iLogik
Interest Barrington Table Toppers - Group Buy
2 3
Replies
63
Views
4K
iLogik
iLogik
H
Wanted Dark Toppers
Replies
5
Views
403
ChipperMarten
ChipperMarten
T
Toppers vs Table
Replies
8
Views
925
Salmonblaster
Salmonblaster
Back
Top Bottom