Eloe2000
Straight Flush
He makes custom chip labels and specifically has instructions how to get your frac labels made for HSI chips here...
https://www.pokerchipforum.com/threads/faq-how-to-order-horseshoe-southern-indiana-hsi-labels.65837/
-
This site contains affiliate links. If you choose to make a purchase after clicking a link, Poker Chip Forum may receive a commission at no additional cost to you. Thank you for your support!
"Murdered" Chip Meaning (1 Viewer)
- Thread starter Granadol
- Start date
He makes custom chip labels and specifically has instructions how to get your frac labels made for HSI chips here...
https://www.pokerchipforum.com/threads/faq-how-to-order-horseshoe-southern-indiana-hsi-labels.65837/
OP
OP
Granadol
Pair
Where is the best place to find HSI 25 cent labels?
Eloe2000
Straight Flush
I actually prefer over labels where viable. It adds additional weight to non-leaded chips and if the chips in question are new, I've found the heightened inlay face actually makes shuffling easier. Obviously if the chips where it could become more of an issue but in 99% of our home games that would take decades.
Edit - inlay/label removal also changes the sound of the chip when shuffled. Over labels have less of an effect and seem to deepen the sound as opposed to heighten/thin it.
Last edited:
Eloe2000
Straight Flush
I don't roll with RHCs so its a moot point for me but I found the labels so thin that they were really tricky to apply and appear to me be more obvious as "stickers" rather than a true inlay.
RichMahogany
Straight Flush
Same, as regards to looking like “stickers.” I think overlabels look terrible
There’s no such thing as a dumb question, just dumb...nevermind.
Just kidding.
We all start out at some point without knowing all the lingo and rationale behind things. Ask away.
https://www.pokerchipforum.com/forums/gear-labels.48/
@Gear is our resident label creator (he can also do the chip murdering for a fee).
I agree. The look and feel of an overlabel is not close to a full label replacement by a long shot.
Does anyone have PrOn specifically of murdered HSI chips before relabeling? What process did you use? How difficult were they compared to say, THC inlay murder?
I prefer to look at it this way ^^^
Most of the time murder chips are destined to sit in a box or on a shelf gathering dust and never being used (not always but the majority). Giving them new life and getting them on the felt is a better life.
AWenger
Full House
Just to clarify. Milled (or murdered) chips could be left blank. I have a few chips like that, where the hotstamp was a "Roulette A" or letter, and they're milled blank, and I just left them that way. See the yellow chips here: https://www.pokerchipforum.com/media/albums/paulson-solids-tournament-set.1356/
Although many times the (now) blank chips are relabeled.
The term became fashionable in competitive web-based gaming culture, and people think it's cool I guess. Much like how the use of crotch puns never fails to make people giddy with delight for some weird reason.
I always assumed the term could be loosely used to reference any chip modification that cannot be undone, perhaps most commonly the removal of inlays.
I always assumed the term could be loosely used to reference any chip modification that cannot be undone, perhaps most commonly the removal of inlays.
I could not bring myself to murder some chips but I did have @Gear do the deed for me. What a great way to finish off my first casino set! Trops was the set that changed my searches to Nevada only chips.
I had him color match the inlay background and used a textured label. The artwork is from what I made up years ago to make the buttons.
Love the set.
I had him color match the inlay background and used a textured label. The artwork is from what I made up years ago to make the buttons.
Love the set.
What... does anyone, really?
Nanook
Full House
Sure. I have done a bunch..>1000 HSI's Here is a pic of after murder and pre-clean and re-label
Nanook
Full House
There are several threads on "How to murder" but quickly here is the procedure:
1) Cut the inlay
2) Peel off the protective Laminate - I have a little pick that I use to turn back the corner of the laminate which makes it much easier to grab with a pliers.
3) Apply Non Acetone Nail Polish Remover (NANPR) and let sit for about 20 minutes
4) Remove printed inlay (hopefully it is vinyl) Vinyl = relatively easy, paper = much more difficult (I also use the pick to get under the edge of the vinyl inlay and get it started)
and a pictorial:
1) Cut the inlay
2) Peel off the protective Laminate - I have a little pick that I use to turn back the corner of the laminate which makes it much easier to grab with a pliers.
3) Apply Non Acetone Nail Polish Remover (NANPR) and let sit for about 20 minutes
4) Remove printed inlay (hopefully it is vinyl) Vinyl = relatively easy, paper = much more difficult (I also use the pick to get under the edge of the vinyl inlay and get it started)
and a pictorial:
Last edited:
Exacto knife method?Sure. I have done a bunch..>1000 HSI's Here is a pic of after murder and pre-clean and re-label
Never mind. Spoke too fast.
Nanook
Full House
Just like the picture shows. I started in the middle somewhere and pulled the blade toward myself and my thumb. I never even came close to cutting myself and like I said, I have over 1000 HSI's under my belt and a few others too. Once you have done a few it will become pretty obvious how deep you want to go. Go deep enough that you go through the protective laminate, but not any deeper. This isn't super critical, but you do want to get all the way through the laminate or otherwise you will have a hard time grabbing it and pulling it up
redrum.......
Resurrection!
CrazyEddie
Full House
Since this is a thread for new members, I feel compelled to point out that some people seek out and collect starburst chips, and in fact some starburst colors are very desired and very hard to find, and thus on behalf of the rest of us I always hope that people looking to build a collection of solids to mill and relabel would stick to monograms and obscure, uninteresting cardrooms rather than taking more starbursts off the market permanently.
But of course, anyone should always feel free to do whatever they like with their own chips.
---
For the new members: "Solids" are chips without edge spots, most often found in sets made for the home market and in obscure, uninteresting cardrooms, and also as low denomination chips in some larger casinos, usually with hotstamps instead of inlays. "Starbursts" are chips with a unique star-shaped hotstamp on them. Paulson sometimes uses that hotstamp to cancel chips that need to be decommissioned for various reasons; Paulson also made lots of plain chips - usually solids - that have just that hotstamp on them, and then sold them to the home market.
Some of us think they look really cool.
Out of curiosity, what starburst colours are desirable? The typical high value colours like blaze orange, hot pink, etc? Or are there others that you wouldn't think of that people want/need?Since this is a thread for new members, I feel compelled to point out that some people seek out and collect starburst chips, and in fact some starburst colors are very desired and very hard to find, and thus on behalf of the rest of us I always hope that people looking to build a collection of solids to mill and relabel would stick to monograms and obscure, uninteresting cardrooms rather than taking more starbursts off the market permanently.
But of course, anyone should always feel free to do whatever they like with their own chips.
---
For the new members: "Solids" are chips without edge spots, most often found in sets made for the home market and in obscure, uninteresting cardrooms, and also as low denomination chips in some larger casinos, usually with hotstamps instead of inlays. "Starbursts" are chips with a unique star-shaped hotstamp on them. Paulson sometimes uses that hotstamp to cancel chips that need to be decommissioned for various reasons; Paulson also made lots of plain chips - usually solids - that have just that hotstamp on them, and then sold them to the home market.
Some of us think they look really cool.
Oh the carnage...
I've said this before, if a chip is not happy in its current state, feels like its doesn't belong in or has no proper home. There are two possible courses of action.
Action 1). Label over.
This requires giving the chip a new identity by applying a label to the surface of the older inlay.
This makes the chip happy, but not a permanent fix. As the new label can be removed and the old inlay / hot stamp be exposed. Reverting the chip back to its original state.
Action 2) Label Reassignment Surgery (LRS) (aka Murder)
This requires the physical removal of the old inlay or hotstamp and a new label applied.
This also makes the chip happy. While nothing is permanent and this too can be changed. The old inlay is gone and the chip can never go back to that original state.
I've said this before, if a chip is not happy in its current state, feels like its doesn't belong in or has no proper home. There are two possible courses of action.
Action 1). Label over.
This requires giving the chip a new identity by applying a label to the surface of the older inlay.
This makes the chip happy, but not a permanent fix. As the new label can be removed and the old inlay / hot stamp be exposed. Reverting the chip back to its original state.
Action 2) Label Reassignment Surgery (LRS) (aka Murder)
This requires the physical removal of the old inlay or hotstamp and a new label applied.
This also makes the chip happy. While nothing is permanent and this too can be changed. The old inlay is gone and the chip can never go back to that original state.
CrazyEddie
Full House
Right now I'm particularly thinking of black. @DZPoker spent a long time looking for a rack before finding one, and I've yet to see one come up for sale in the public view. But I guess that speaks to rarity, not desirability (maybe both!). Whites seem to be fairly common, as well as reds, although shade matching is always a problem when trying to make a rack out of thirty chips here and eighty-five chips there.
A few people are trying to make "skittles" sets (like this one!), where every player gets a stack of chips in their own color. So for something like that they're trying to get many different colors.
Can't speak for anyone else, but yeah, starburst collectors like pretty colors as much as anyone, so the same colors that are widely in demand will be in demand for starbursts as well. For myself, I'm looking for black (to go with my beautiful whites) plus anything else that my wife says "oooh!" when she sees the pictures.
But there is no guarantee that you can revert the chip to its original state. If the adhesive bond of the overlabel is strong enough, trying to remove it can rip off the laminate layer underneath it, exposing the original inlay to future environmental damage.
Possibly, haven't seen any issues from he labels Gear puts out.
His are jusssst right !
I have. It's not the fault of the label maker. It's just the chemical nature of the beast.
mtl mile end
Flush
Having read all the posts to this point, I have a potentially stupid question. If milling is murder, is inlay removal murder as well? Where's the line drawn? Removing an inlay seems more GBH than homicide to me.
Create an account or login to comment
You must be a member in order to leave a comment
Create account
Create an account and join our community. It's easy!
Log in
Already have an account? Log in here.
Similar threads
- Locked
