3D3P rack spacers / vendor no longer onsite? (1 Viewer)

[natumes]

He at one point had the.stl files up, possibly before vendor status, and I think they all got wiped when his vendor status lapsed. Wish I had saved them, now that I have a 3d printer and all. Would love some of the items and I could print for others as well.

Getting efficient would probably just mean getting more printers and offering fewer colors. It's surprising how long seemingly small parts take to print. I've been working on a roll up dice box (6 dice trays that wrap around a core) for a few days now. Each tray takes ~3 hours to print. I need to build a raspberry pi to run octoprint so I can manage it remotely. I already want a second printer just for personal projects

 

[Newenne]

Maybe he might offer the files up again if he is truly done vending

 

[Goldfish]

The least he could do is refund money paid…….

 

[Newenne]

The least he could do is refund money paid…….

Oof. Still zero contact?

 

[Newenne]

Once upon a time @justsomedude was able to help me reach out to @One Eyed Dollar - not sure if still relevant/able?

 

[doublebooyah85]

Stackers off the chart

The least he could do is refund money paid…….

I think you’re the only one who got burned. I’m sure it was an oversight and he will make good one day.

 

[calfdemon]

I think you’re the only one who got burned. I’m sure it was an oversight and he will make good one day.

Nope... I paid months ago and have had zero contact after numerous attempts both on his website and PCF.

 

[Goldfish]

Stackers off the chart

I think you’re the only one who got burned. I’m sure it was an oversight and he will make good one day.

It’s fine. It was only a small order of sample matsui spacers.

 

[calfdemon]

It’s fine. It was only a small order of sample matsui spacers.

Mine was only for a couple flattening racks. It's not so much about the amount of money... it's the principle of it all. If you take money for a product or service and either can't or don't deliver, then refund those that paid you.

 

[Goldfish]

Mine was only for a couple flattening racks. It's not so much about the amount of money... it's the principle of it all. If you take money for a product or service and either can't or don't deliver, then refund those that paid you.

I agree completely.

 

[Eriks]

Glad I picked up those rack stackers when I had the chance

Same here. Can’t imagine stacking up the sets without those babies now

 

[joeyshin]

Oh man I didn’t know he was gone. I ordered Apache rack spacers last year? Two years ago? And they came within a month.

 

[97destroyer]

I placed an order mid March. Got a confirmation email and can see the order on the web site. I haven’t followed up on it yet since I figured it would take a while to fulfill, but this thread has me concerned now.

 

[dpeks13]

Sammeee

 

[Asmodeus]

I saved files someone once link to that page, they are in zip folders so not sure how that works as I am somewhat computer illiterate with stuff like that. I figured I might buy a 3D printer one day to try and make some. One of the folders is for 39mm_universal_rack_spacer.

 

[Eriks]

I saved files someone once link to that page, they are in zip folders so not sure how that works as I am somewhat computer illiterate with stuff like that. I figured I might buy a 3D printer one day to try and make some. One of the folders is for 39mm_universal_rack_spacer.

Not all heroes wear capes

 

[Venturalvn]

I recreated the Matsui racks spacers model myself in a few minutes and spent a few printing sessions tweaking the model to print better and faster. They print slow, and take up a lot of space on the print bed - 6 per print on an Ender 3 V2 bed. That's 18 per day IF you can be there every 6 hours to clear the print bed and restart the print.

It's no surprise he fell off the map. He wasn't set up well as a business. Too much customization available, too many filament colors to swap, products that print too slowly, and models that don't orient well on the bed, leading to too much post print cleanup. There just isn't enough money in it without a full farm set up and building models that don't require a lot of post processing.

 

[doublebooyah85]

The 10 chip / 20 chip barrel holders were awesome. Anyone else make them?

 

[TheBigTater]

Yeah I believe Ben was a victim of his own success, especially for a 1 man shop. He got overwhelmed with orders and decided to shut it down rather than offer subpar fulfillment times (like said above 3D printing is slow). Great guy, i understand why he quit & his stuff is quality. I couldn't live without his RackStackers and Flattening racks.

 

[Venturalvn]

The 10 chip / 20 chip barrel holders were awesome. Anyone else make them?

In a certain sense... https://www.pokerchipforum.com/thre...t-actually-just-my-house.101205/#post-2096994

 

[Cord]

I made a pretty big order mid Feb but haven’t heard anything since. Hopefully he’ll fulfill all the outstanding orders… got some racker stackers from him a while back and they are game changers for sure

 

[Saxplayer]

I ordered months ago, nothing heard via correspondence re: order.

 

[Machine]

Yeah still no contact

 

[natumes]

I got the STL files for rack spacers and racks/lids, when I get back from this work trip I'll start some test prints and see if I can't help some peeps out. If anybody has other STL files from him I'd love to test those as well (particularly the racker stacker).

 

[MichaelBubly]

Anyone happen to get the STL for the rack flattening trays? Particularly the ribbed one for 43mm and 47mm chips?

Came decently close to replicating the design, but after 4 test prints I couldn't quite get it right.

Fit all the chips, but it was slightly too spaced apart to allow them to be picked up with a clamp.

 

[MichaelBubly]

That being said, I do have STLs for the rest of the flattening racks if anyone would like.

 

[natumes]

Anyone happen to get the STL for the rack flattening trays? Particularly the ribbed one for 43mm and 47mm chips?

Came decently close to replicating the design, but after 4 test prints I couldn't quite get it right.

Fit all the chips, but it was slightly too spaced apart to allow them to be picked up with a clamp.

I might I'll have to check next week

 

[calfdemon]

That being said, I do have STLs for the rest of the flattening racks if anyone would like.

I don't have a printer or the know how, but I was trying to buy the flattening racks for 39mm with the 43mm spacers between. If someone starts making some, I have money to throw at you for a couple of 20 chip racks (41 slots with the 43mm spacers).

 

[timinater]

Anyone happen to get the STL for the rack flattening trays? Particularly the ribbed one for 43mm and 47mm chips?

Came decently close to replicating the design, but after 4 test prints I couldn't quite get it right.

Fit all the chips, but it was slightly too spaced apart to allow them to be picked up with a clamp.

Looks like some files are still available here: https://www.pokerchipforum.com/threads/oeds-models-for-3d-printing-poker-stuff.50673/

 

[toothpic]

I put an order in Feb for the stacker rackers. Trying to do it without them felt insane. I'll treat it a like a CPC chip order I suppose. Hopefully if he's not making them anymore he just refunds the orders.