8V Compression Clay Blowout Sale (5 Viewers)

[Moxie Mike]

Does anyone happen to have hex or RGB codes for these chips? Specifically I'm interested in the pinks, purple and blues.

Thanks in advance.

 

[Annorax]

I'd be interested in hex or RGB codes for all of them; it'd help my label designs quite a bit.

 

[Kensco]

These are the codes Joe Daley posted back when the chips were produced:

8V RGB Color Codes

Chip color / spot color / spot color

white 242,233,231 grn 125,186,0 black


red 195,0,69 orange 255,164,138 dk blue 0,84,159


black white 242,233,231 grn 0,176,82


purple 110,37,133 lt blue 168,197,235 red 195,0,69


yellow 248,228,152 blk orange 255,164,138


brown 131,99,68 ylw 248,228,152 lt blue 168,197,235


salmon 254,138,158 white 242,233,231 purple 110,37,133


green 0,176,82 lt blue 168,197,235 lt green 125,186,0


blue 90,133,215 white 242,233,231 dk blue 0,84,159


grey 201,202,200 white 242,233,231 red 195,0,69

This is the warning Joe posted:

"I won’t get involved with guaranteeing EXACT color matching unless were doing everything here at an additional cost.
The codes will be REAL close but if you need exact its not cheap to do- rather have you cancel your order then expect exact dead on color matching
yes you can change your order no problem just send in the revised one".

I used the above codes particular to my chips with this result:

Search out pics of Jonsey07's to see his $25 chip (same codes used)

Hope this helps @Moxie Mike, @Annorax, and anyone else

 

[Moxie Mike]

Thanks a ton

 

[Ethan]

Killer design and relabel @Kensco

 

[SeanGecko]

These are the codes Joe Daley posted back when the chips were produced:

8V RGB Color Codes

Chip color / spot color / spot color

white 242,233,231 grn 125,186,0 black


red 195,0,69 orange 255,164,138 dk blue 0,84,159


black white 242,233,231 grn 0,176,82


purple 110,37,133 lt blue 168,197,235 red 195,0,69


yellow 248,228,152 blk orange 255,164,138


brown 131,99,68 ylw 248,228,152 lt blue 168,197,235


salmon 254,138,158 white 242,233,231 purple 110,37,133


green 0,176,82 lt blue 168,197,235 lt green 125,186,0


blue 90,133,215 white 242,233,231 dk blue 0,84,159


grey 201,202,200 white 242,233,231 red 195,0,69

This is the warning Joe posted:

"I won’t get involved with guaranteeing EXACT color matching unless were doing everything here at an additional cost.
The codes will be REAL close but if you need exact its not cheap to do- rather have you cancel your order then expect exact dead on color matching
yes you can change your order no problem just send in the revised one".

I used the above codes particular to my chips with this result:

View attachment 232433

Search out pics of Jonsey07's to see his $25 chip (same codes used)

Hope this helps @Moxie Mike, @Annorax, and anyone else

@Kensco doing all the hard work

 

[Jonesey07]

These are the codes Joe Daley posted back when the chips were produced:

8V RGB Color Codes

Chip color / spot color / spot color

white 242,233,231 grn 125,186,0 black


red 195,0,69 orange 255,164,138 dk blue 0,84,159


black white 242,233,231 grn 0,176,82


purple 110,37,133 lt blue 168,197,235 red 195,0,69


yellow 248,228,152 blk orange 255,164,138


brown 131,99,68 ylw 248,228,152 lt blue 168,197,235


salmon 254,138,158 white 242,233,231 purple 110,37,133


green 0,176,82 lt blue 168,197,235 lt green 125,186,0


blue 90,133,215 white 242,233,231 dk blue 0,84,159


grey 201,202,200 white 242,233,231 red 195,0,69

This is the warning Joe posted:

"I won’t get involved with guaranteeing EXACT color matching unless were doing everything here at an additional cost.
The codes will be REAL close but if you need exact its not cheap to do- rather have you cancel your order then expect exact dead on color matching
yes you can change your order no problem just send in the revised one".

I used the above codes particular to my chips with this result:

View attachment 232433

Search out pics of Jonsey07's to see his $25 chip (same codes used)

Hope this helps @Moxie Mike, @Annorax, and anyone else

 

[MarquetteMonkey]

These are the codes Joe Daley posted back when the chips were produced:

8V RGB Color Codes

Chip color / spot color / spot color

white 242,233,231 grn 125,186,0 black


red 195,0,69 orange 255,164,138 dk blue 0,84,159


black white 242,233,231 grn 0,176,82


purple 110,37,133 lt blue 168,197,235 red 195,0,69


yellow 248,228,152 blk orange 255,164,138


brown 131,99,68 ylw 248,228,152 lt blue 168,197,235


salmon 254,138,158 white 242,233,231 purple 110,37,133


green 0,176,82 lt blue 168,197,235 lt green 125,186,0


blue 90,133,215 white 242,233,231 dk blue 0,84,159


grey 201,202,200 white 242,233,231 red 195,0,69

This is the warning Joe posted:

"I won’t get involved with guaranteeing EXACT color matching unless were doing everything here at an additional cost.
The codes will be REAL close but if you need exact its not cheap to do- rather have you cancel your order then expect exact dead on color matching
yes you can change your order no problem just send in the revised one".

I used the above codes particular to my chips with this result:

View attachment 232433

Search out pics of Jonsey07's to see his $25 chip (same codes used)

Hope this helps @Moxie Mike, @Annorax, and anyone else

Thank you for this. Very helpful!

 

[mrplacey]

@Kensco You're the man!

 

[Amish Rabbi]

I would grab a rack of blue if one appeared...

 

[RussB42]

In regards to Racks, just use a nice Wood Case to keep and carry them in.

 

[One Eyed Dollar]

Has anyone found another source of racks that fit these? They don't fit any of my cheap racks from Amazon and other sources, and they don't fit in my wooden cases that I hoped to put them in either. They're even too wide for the Warneke boxes.

 

[sir bluffs alot]

Has anyone found another source of racks that fit these? They don't fit any of my cheap racks from Amazon and other sources, and they don't fit in my wooden cases that I hoped to put them in either. They're even too wide for the Warneke boxes.

Following^^^

 

[SeanGecko]

Hmmm I wonder if someone here had honeycomb racks and was using those until The Glorious Gene shares the PGI racks.

 

[RussB42]

I have a whole bunch of the Honeycomb racks, with the Original Chips in them.

 

[Labrat]

Soooo...anybody else get around to labeling theirs? Let's see some pics.

 

[JoeBGo]

Soooo...anybody else get around to labeling theirs? Let's see some pics.

Here....https://www.pokerchipforum.com/threads/post-your-8v-semi-custom-thread.35283/

 

[Labrat]

Here....https://www.pokerchipforum.com/threads/post-your-8v-semi-custom-thread.35283/

Aha! There they are!

 

[FDLmold]

Getting 2100 labels made very soon...

(and the missing 15 pink chips from ABC)

 

[MarquetteMonkey]

I am looking for 60 additional green chips if anyone is willing to trade or sell them.

Now that I have had the chance to realize my insanity in ordering, I have some chips available if people are still looking for some. I potentially have purple, white, and gray available for sale and more colors if trading for green.

Thanks!

 

[MarquetteMonkey]

These are the codes Joe Daley posted back when the chips were produced:

8V RGB Color Codes

Chip color / spot color / spot color

white 242,233,231 grn 125,186,0 black


red 195,0,69 orange 255,164,138 dk blue 0,84,159


black white 242,233,231 grn 0,176,82


purple 110,37,133 lt blue 168,197,235 red 195,0,69


yellow 248,228,152 blk orange 255,164,138


brown 131,99,68 ylw 248,228,152 lt blue 168,197,235


salmon 254,138,158 white 242,233,231 purple 110,37,133


green 0,176,82 lt blue 168,197,235 lt green 125,186,0


blue 90,133,215 white 242,233,231 dk blue 0,84,159


grey 201,202,200 white 242,233,231 red 195,0,69

This is the warning Joe posted:

"I won’t get involved with guaranteeing EXACT color matching unless were doing everything here at an additional cost.
The codes will be REAL close but if you need exact its not cheap to do- rather have you cancel your order then expect exact dead on color matching
yes you can change your order no problem just send in the revised one".

I used the above codes particular to my chips with this result:

View attachment 232433

Search out pics of Jonsey07's to see his $25 chip (same codes used)

Hope this helps @Moxie Mike, @Annorax, and anyone else

Can I ask what color you used for your background gradient?

 

[Kensco]

Can I ask what color you used for your background gradient?

I used CMYK white (0,0,0,0) and CMYK grey (0,0,0,30) on a radial gradient.

The white gradient slider is set at location 75%, the grey gradient slider is set at location 100%.

The gradient slider controlling the transition between the two colors I set at location 75%.

Opacity on both colors set at 100%.

 

[Hobie]

If anyone has extra Red I'd be interested in obtaining some. I was able to get the white, brown, pink black and purple, but were out of red. Ideally, my target number would be 75. Thanks!

 

[Beakertwang]

If anyone has extra Red I'd be interested in obtaining some. I was able to get the white, brown, pink black and purple, but were out of red. Ideally, my target number would be 75. Thanks!

@SeanGecko

 

[Gobbs]

I seem to be having the same issues as others:

• I need three or four barrels of reds to round out my micro-stakes cash set.
• I need racks that can fit a barrel of 20 (instead of 19 like my cheap racks).

My wife hasn't threatened to kick me out of the house yet...so, I still have money to spend!!!

 

[zo121179]

I seem to be having the same issues as others:

• I need three or four barrels of reds to round out my micro-stakes cash set.
• I need racks that can fit a barrel of 20 (instead of 19 like my cheap racks).

My wife hasn't threatened to kick me out of the house yet...so, I still have money to spend!!!

If I had a nickel for every time the wife threatened to kick me out because of poker chip purchases I could buy those Paulson Classics going for $15K on Feebay.

 

[One Eyed Dollar]

I got my labels from ABC and they turned out so cool! Now I just have to apply them all. 1 rack down, 11 to go...

 

[Tham6165]

I got my labels from ABC and they turned out so cool! Now I just have to apply them all. 1 rack down, 11 to go...

pron?

 

[SeanGecko]

I need racks that can fit a barrel of 20 (instead of 19 like my cheap racks).

Honeycomb poker trays is your best bet on this one.

 

[One Eyed Dollar]

pron?

Unfortunately I can't post photos. ABC agreed to print the label I wanted as long as I didn't post photos online. I can assure you that they're awesome though, and you can see them in person if you're ever in Denver! The look and feel of the chips and labels is really amazing for the price. I'll give this hint as to the design: I have 1,000 of the blue chips and the label design is based on my favorite sports team from my hometown aka the Gateway to the West.