Barrington poker table thread (39 Viewers)

[jpoppaaa]

Very nice - good job



You don't know what you're missing

Maroon but close enough.

(not a Barrington but ...)

Maybe I need to rethink the color scheme! That looks real good.

 

[Salmonblaster]

If it's been asked earlier in the thread I apologize, but for the ESPN style tables with the led lights, how easy of a project is it to swap the blue led lights that come with the table to a multicolor set from Amazon? How would you install the new ones? Any help and guidance is always appreciated.

 

[warewulf]

If it's been asked earlier in the thread I apologize, but for the ESPN style tables with the led lights, how easy of a project is it to swap the blue led lights that come with the table to a multicolor set from Amazon? How would you install the new ones? Any help and guidance is always appreciated.

Probably about the same amount of work as buying a table without lights and just adding them.

 

[jpoppaaa]

More progress tonight! Cupholders will be here tomorrow and I need some more vinyl to finish before hosting tomorrow night.

 

[Drumstricks]

I changed out the cupholders, the new ones are 3.5" wide, and fit full sized yetis (see picture). I drilled a pilot hole for the hole saw arbor by measuring the middle of the old cup holder holes, and then drilled with a harbor freight hole saw from underneath so that I wouldn't mess up the padding/cloth on top. It was really straight forward. I sanded the holes after they were cut until the cupholders fit perfectly! haven't even glued them in and I'm not sure that I need to. I did have to cut the leg frame for the 4 cupholders nearest to them.

 

[ngmcs8203]

If it's been asked earlier in the thread I apologize, but for the ESPN style tables with the led lights, how easy of a project is it to swap the blue led lights that come with the table to a multicolor set from Amazon? How would you install the new ones? Any help and guidance is always appreciated.

I need to do it. I think someone else on here made a post about the process. If I remember correctly you just have to take the rail off and there isn’t much afterward but when you do you have to be careful to not tear the felt, unless you are replacing.

I think I’m just going to replace my felt even though I have a topper. I like the diffuser that I’ve seen on some tables that chanman made for some of his builds.

 

[jpoppaaa]

Done! For now. New Barrington in the background will get emerald green ssc and brown leather rail.

 

[gkar197]

Just upgraded a Barrington for a buddy. He saw mine and wanted his to get the same treatment. Also got a custom table topper for him as a gift because he deals Black Jack after tourneys sometimes.

 

[jpoppaaa]

Just upgraded a Barrington for a buddy. He saw mine and wanted his to get the same treatment. Also got a custom table topper for him as a gift because he deals Black Jack after tourneys sometimes.

Nice! Is that new vinyl on the rail? I just did mine and the red with brass looks classy. Nice job!

 

[gkar197]

Nice! Is that new vinyl on the rail? I just did mine and the red with brass looks classy. Nice job!

Yup new whisper vinyl from Joann.

 

[esapigao]

Here is a Barrington Table instruction manual.

https://medalsports.com/wp-content/uploads/2023/06/PK100Y23002_20230306_Rev.1.pdf

 

[maloviz]

Done! For now. New Barrington in the background will get emerald green ssc and brown leather rail.


View attachment 1223105View attachment 1223106

What cupholders are those? Brybelly small ?

@gkar197 . Same question to you.

Which ones do you guys prefer?

 

[esapigao]

What cupholders are those? Brybelly small ?

@gkar197 . Same question to you.

Which ones do you guys prefer?

https://a.co/d/8C5peTv

 

[gkar197]

What cupholders are those? Brybelly small ?

@gkar197 . Same question to you.

Which ones do you guys prefer?

https://www.amazon.com/dp/B09YTQCLDK?psc=1&ref=ppx_yo2ov_dt_b_product_details

I used the stainless ones of these for my own table and the brass for this build.

 

[jpoppaaa]

What cupholders are those? Brybelly small ?

@gkar197 . Same question to you.

Which ones do you guys prefer

These are brass from Texas poker supply. Fit cans bottles and solo cups. Most ppl at my game drink cans or bottles which these are best for

 

[warewulf]

On sale for $199

https://www.walmart.com/ip/Barringt...iates_ad_id=565706&campaign_id=9383&sharedid=

 

[maloviz]

On sale for $199

https://www.walmart.com/ip/Barringt...iates_ad_id=565706&campaign_id=9383&sharedid=

Looks like the old model which I think has different cup holders and leather. Still a good deal though

 

[springbox]

Looks like the old model which I think has different cup holders and leather. Still a good deal though

Just ordered one of these a few weeks ago (at $230, damnit) and I believe it has the new rail. See pic below.

I picked up a 2nd table, and the new one from Walmart is on the left. I have the original? Order of topper and can confirm the new table is just a little bigger..if I measured right the new table is 32x74 surface. Does that sound right to others with new table?
View attachment 1219065

 

[maloviz]

Just ordered one of these a few weeks ago (at $230, damnit) and I believe it has the new rail. See pic below.

Gotcha. Maybe just an outdated photo then.

 

[Buge]

Most likely just using the older photo

 

[esapigao]

Just upgraded a Barrington for a buddy. He saw mine and wanted his to get the same treatment. Also got a custom table topper for him as a gift because he deals Black Jack after tourneys sometimes.

Beautiful upgrades. Just gave me some inspiration to upgrade mine.

 

[esapigao]

Done! For now. New Barrington in the background will get emerald green ssc and brown leather rail.


View attachment 1223105View attachment 1223106

Did you put foam under the speed cloth?

 

[jpoppaaa]

Did you put foam under the speed cloth?

Used the foam that was there. It’s fine for now. In the future I’d swap it out.

 

[esapigao]

Used the foam that was there. It’s fine for now. In the future I’d swap it out.

Thanks for the tip. I may replace the foam while I’m replacing the cloth.

 

[jamesjkim]

Thanks for the tip. I may replace the foam while I’m replacing the cloth.

I just put new cloth on top of the existing one. Didn’t think it was necessary to replace anything and still feels great.

 

[NotRealNameNoSir]

Got started. Holders away from the table supports are pretty easy, but I ripped the rail on both…might do some pre cutting on the next 8.
View attachment 1140500View attachment 1140501

New cups are much better.View attachment 1140502

These hold a normal rocks glass fine?

 

[dmoney]

These hold a normal rocks glass fine?

Yep

 

[maloviz]

I picked up a 2nd table, and the new one from Walmart is on the left. I have the original? Order of topper and can confirm the new table is just a little bigger..if I measured right the new table is 32x74 surface. Does that sound right to others with new table?
View attachment 1219064View attachment 1219065View attachment 1219066

I can confirm that @rjdev7 toppers don't fit the new version of the table perfectly. I have the same ring around the entire table. It doesn't really make a difference in play but it is slightly annoying to see.

 

[doublebooyah85]

I can confirm that @rjdev7 toppers don't fit the new version of the table perfectly. I have the same ring around the entire table. It doesn't really make a difference in play but it is slightly annoying to see.

Ahh bummer! Haven’t tried mine. Easy fix. Glad you brought it to their attention!

These toppers making dealing so much easier!

Didn’t someone just share a link to buy the bags for carrying the toppers? Need to pull the trigger on those.

 

[maloviz]

Didn’t someone just share a link to buy the bags for carrying the toppers? Need to pull the trigger on those.

Oh really? I might need to grab one of those. I've been using the box it was shipped in for months lol