great thx. so quantities do not apply across sizes/mold that sucks. do you have the standard price for all sizes and how the discount at 10k apply to each of them? or if you have the info for some of them and not all could u still share it? thx!
-
This site contains affiliate links. If you choose to make a purchase after clicking a link, Poker Chip Forum may receive a commission at no additional cost to you. Thank you for your support!
Custom artwork. US/CAN CARDS MOLD 2: The Quickening!! (5 Viewers)
- Thread starter SeanGecko
- Start date
Eloe2000
Straight Flush
I do not, but I just shot Tina an email for full pricing schedule or hopefully others can chime in.
I may be down for 1,000 big boys (50mm or bigger) and/or plaques, pending costing isn't outrageous. I would love to have a large diameter set. If anyone else is looking at large diameter keep me in mind.
Eloe2000
Straight Flush
avatar checks out
actually I might have misunderstood your post @Eloe2000 . if we get lets say 5k cards mold and 5k 43mm textured mold we dont get the discount, but if we get lets say 10k cards mold then we get the discount for those and any additional molds added to that order, correct? this is my conclusion considering first gb op...
Thanks! Pricing schedule and shipping costs would be super helpful. Appreciate that!
I assume shipping costs would be similar for a group-buy located in Europe as everything is coming from China?
Eloe2000
Straight Flush
I am confirming these questions now and going back and forth. Seems like prices may have already changed but are identical for cards mold or 43mm.
In the mean time I have shipping prices. Can anyone figure this out?
"shipping cost by ship ,unit price usd2.5/KG(if 10000pcs 40MM) ,5000pcs 43MM ,total gross weight 105KGS+12.5*5ctns)*2.5=usd325),thanks!"
I just weighed the chips and the cards mold (40mm) are 9.7g each and the 43mm are 11.9g each. So based on the first part of the quote it seems like shipping for cards mold is $0.025 per chip. Based on similar math by weight the 43mm should be $0.03 per chip. But I don't understand the math she did on the second part of the quote for 43mm. Her weight for 5000pcs is off by almost 2x.
In the mean time I have shipping prices. Can anyone figure this out?
"shipping cost by ship ,unit price usd2.5/KG(if 10000pcs 40MM) ,5000pcs 43MM ,total gross weight 105KGS+12.5*5ctns)*2.5=usd325),thanks!"
I just weighed the chips and the cards mold (40mm) are 9.7g each and the 43mm are 11.9g each. So based on the first part of the quote it seems like shipping for cards mold is $0.025 per chip. Based on similar math by weight the 43mm should be $0.03 per chip. But I don't understand the math she did on the second part of the quote for 43mm. Her weight for 5000pcs is off by almost 2x.
rxed
Pair
Is it the cost of shipping 15k chips, 10k 39 plus 5k 43?
BillyBluff
Flush
Are you sure it's not something like this?:
40mm x 10000pcs = 105KGs (including packaging) - or 10.5KG per carton and there a 10 of them
43mm x 1000pcs = 12.5KG (including packaging) - and there are 5 cartons
Obviously, there is an easier way to write that equation! I could be totally wrong though and is just a guestimate
Eloe2000
Straight Flush
Are you sure it's not something like this?:
40mm x 10000pcs = 105KGs (including packaging) - or 10.5KG per carton and there a 10 of them
43mm x 1000pcs = 12.5KG (including packaging) - and there are 5 cartons
Obviously, there is an easier way to write that equation! I could be totally wrong though and is just a guestimate
Ahh, I see it now. It is a weird equation but its a quote for 10,000 40mm (105kg) + 5,000 43mm (5x12.5kg=75kg) = $325 total. Or about $0.022 per chip average with those 15,000 chips.
OP
OP
SeanGecko
4 of a Kind
You're too kind. Should have made them do the scavenger hunt of information
I'd love to help with anyone's custom project, though I've got a queue that's going to keep me busy well into December and beyond. I'm not sure when the cutoff for orders will be on this but I'll try to accommodate.
On the same note: I did just launch a new custom design that is available for anyone to purchase and use. Details here: https://www.pokerchipforum.com/thre...ock-designs-now-available.65474/#post-1301812
I'm hoping to add more designs before the cutoff for this run. Stay tuned!
chutracheese
Straight
That's really cool Tim!
Just a thought... What about a 5c if someone wants to do a micro cash set?
Just a thought... What about a 5c if someone wants to do a micro cash set?
rxed
Pair
Could I talk you into a version of the NCC set that the rebuy is doing with a fake silver hot stamp on the $1 like the real set? Nothing else changed.I'd love to help with anyone's custom project, though I've got a queue that's going to keep me busy well into December and beyond. I'm not sure when the cutoff for orders will be on this but I'll try to accommodate.
On the same note: I did just launch a new custom design that is available for anyone to purchase and use. Details here: https://www.pokerchipforum.com/thre...ock-designs-now-available.65474/#post-1301812
I'm hoping to add more designs before the cutoff for this run. Stay tuned!
Maybe just on one side (if they can do that). I like your version, it's just a cool stamp.
Bluegrass Poker
Flush
Those aren’t Vineyards!I'd love to help with anyone's custom project, though I've got a queue that's going to keep me busy well into December and beyond. I'm not sure when the cutoff for orders will be on this but I'll try to accommodate.
On the same note: I did just launch a new custom design that is available for anyone to purchase and use. Details here: https://www.pokerchipforum.com/thre...ock-designs-now-available.65474/#post-1301812
I'm hoping to add more designs before the cutoff for this run. Stay tuned!
OP
OP
SeanGecko
4 of a Kind
Noice! Needs a nickel!I'd love to help with anyone's custom project, though I've got a queue that's going to keep me busy well into December and beyond. I'm not sure when the cutoff for orders will be on this but I'll try to accommodate.
On the same note: I did just launch a new custom design that is available for anyone to purchase and use. Details here: https://www.pokerchipforum.com/thre...ock-designs-now-available.65474/#post-1301812
I'm hoping to add more designs before the cutoff for this run. Stay tuned!
CANADIAN GB
Hi there, @vanislander and I are starting a small sub-group of 10-12 people for this GB. We are aiming for an order end of December or January.
We would like to give the rare opportunity to Canadians to save on shipping and potential duties/taxes (no US/CA border crossing). So if you are Canadian and you want to participate to this GB please feel free to PM me with the amount of chips you plan on ordering and the selected mold. Please also specify in which stage you are: 'design ready', 'in progress' or 'not started'. If not started please get this started asap. If you could please have a final decision made for your minimum amount of chip (I guess more could be added without problem until we officially place the order) and the mold that would be helpful. Worth noting that we will request you to have your design validated by a pro designer before submitting your artwork. We can recommend designers if you need to. I just asked a designer to potentially help for this but it is too soon to confirm he is onboard.
If you are American and want to participate in this sub-group because the timing is good for you then no problem. Please feel free to PM me with the same info requested above. Please expect a slight higher shipping cost (MFRB is 40-45 USD). Also, I might wait a week or two before confirming your participation to this sub-group since as mentioned above, we want to give the rare opportunity to Canadians to save on shipping... that being said if you take the time to PM me we'll do our best to include you by enabling more people in the group, just not 20 you know... sadly we are not superheroes like @SeanGecko or @Eloe2000.
For others if you see people wanting to join, specially Canadians, please feel free to redirect them to me.
Math
Hi there, @vanislander and I are starting a small sub-group of 10-12 people for this GB. We are aiming for an order end of December or January.
We would like to give the rare opportunity to Canadians to save on shipping and potential duties/taxes (no US/CA border crossing). So if you are Canadian and you want to participate to this GB please feel free to PM me with the amount of chips you plan on ordering and the selected mold. Please also specify in which stage you are: 'design ready', 'in progress' or 'not started'. If not started please get this started asap. If you could please have a final decision made for your minimum amount of chip (I guess more could be added without problem until we officially place the order) and the mold that would be helpful. Worth noting that we will request you to have your design validated by a pro designer before submitting your artwork. We can recommend designers if you need to. I just asked a designer to potentially help for this but it is too soon to confirm he is onboard.
If you are American and want to participate in this sub-group because the timing is good for you then no problem. Please feel free to PM me with the same info requested above. Please expect a slight higher shipping cost (MFRB is 40-45 USD). Also, I might wait a week or two before confirming your participation to this sub-group since as mentioned above, we want to give the rare opportunity to Canadians to save on shipping... that being said if you take the time to PM me we'll do our best to include you by enabling more people in the group, just not 20 you know... sadly we are not superheroes like @SeanGecko or @Eloe2000.
For others if you see people wanting to join, specially Canadians, please feel free to redirect them to me.
Math
Eloe2000
Straight Flush
Thanks! Going to hold off for now, unless I did something extremely small, since I'm not back in Canada yet, and with the way things have been going, I'm not entirely sure when I will be back there.
RudysNYC
Flush
If any one in the Midatlantic/Northeast wants to get a subgroup going, I'll be doing an add on to my sets for sure.
If you're from NYC (proper, no suburb BS), I can even probably hand-deliver the chips/meet you in a super amenable spot
If you're from NYC (proper, no suburb BS), I can even probably hand-deliver the chips/meet you in a super amenable spot
GetUrShineBox
Flush
I’m in. Meet you at the Borgata!!!
RudysNYC
Flush
Buddy you have no fkin clue how in I am
Jake14mw
Flush
I might be in on that depending on timing.
OP
OP
SeanGecko
4 of a Kind
Out of curiosity (and expedience, as I don't possibly have the patience to go through 150+ pages of the original GB)...
Did anyone happen to do up any tribute sets for any of the following (and can make them available for other groups)? If so, please shoot me a PM.
1. WSOP tributes (bud jones or paulson tributes)
2. Aria or Bellagio tributes
3. Wynn no mold tournament chips
@Kid_Eastwood @timinater ?
Did anyone happen to do up any tribute sets for any of the following (and can make them available for other groups)? If so, please shoot me a PM.
1. WSOP tributes (bud jones or paulson tributes)
2. Aria or Bellagio tributes
3. Wynn no mold tournament chips
@Kid_Eastwood @timinater ?
Last edited:
I got Wynn
Kid_Eastwood
Full House
I made tribute designs available for WSOP 2007 primaries, WSOP 2007 secondaries, WSOP 2018 secondaries, WSOP Binion's (Paulson), ACF Paulson.
And Coke Giraffes.
Anyone interested shoot me a PM. We can change denoms, add chips, etc.
Last edited:
Eloe2000
Straight Flush
@Kid_Eastwood and @JeepologyOffroad I would like to add “off the shelf” designs available for free or purchase to the consolidated master details post (possibly its own thread soon). Can I add the ones you mention above, and do you have more I should list?
Also, @timinater i will add the ones you have in your store, but were there additional ones from GB1 available?
Also, @timinater i will add the ones you have in your store, but were there additional ones from GB1 available?
Create an account or login to comment
You must be a member in order to leave a comment
Create account
Create an account and join our community. It's easy!
Log in
Already have an account? Log in here.
Similar threads
- Locked