New public hybrid mold from Tina 39mm (3 Viewers)

New public Hybrid mold

  • Web

    Votes: 105 66.9%

  • Palm trees

    Votes: 27 17.2%

  • Star

    Votes: 28 17.8%

  • X

    Votes: 24 15.3%

  • Cards Mold

    Votes: 6 3.8%
  • Total voters
    157
SeanGecko

SeanGecko

4 of a Kind
Joined
Jul 4, 2018
Messages
6,583
Reaction score
16,160
Location
HARDWELL UNDERGROUND
Web
Palm Trees
Star MD-57
X
Cards Mold (you know what cards looks like)

IMG_1539.jpeg
83E2D33F-9C06-467D-9887-8B6C7A3C689E.jpeg

s-l960 (1).jpg
IMG_1782.jpeg

Warning the vector still needs to be made so it might not be exactly as the older chips.

Still a work in progress.
 
Last edited:
Anyone have a pic of the web mold with an inlay? Wondering on where the inner concentric circle would fall relatively to where the inlay starts.

Both web and x molds would look nice
 
Nanook said:
Anyone have a pic of the web mold with an inlay? Wondering on where the inner concentric circle would fall relatively to where the inlay starts.

Both web and x molds would look nice
Click to expand...
I wonder if the inlay would be 7/8 or 1”… my guess is it would be 1 inch unlike what we normally see.
 

Attachments

  • 1700979968162.png
    1700979968162.png
    1.5 MB · Views: 142
Last edited:
chipinla said:
I wonder if the inlay would be 7/8 or 1”… my guess is it would be 1 inch unlike what we normally see.
Click to expand...
I don't see any reason why we wouldn't get to choose what is most popular/best looking as nothing has been made yet. Could be 7/8 or 1 or something in between like 15/16". I personally like to see that inner concentric circle as I think it gives the whole chip a lot more balance. I am sure that the entire "web" could be adjusted as necessary too
 
Nanook said:
I don't see any reason why we wouldn't get to choose what is most popular/best looking as nothing has been made yet. Could be 7/8 or 1 or something in between like 15/16". I personally like to see that inner concentric circle as I think it gives the whole chip a lot more balance. I am sure that the entire "web" could be adjusted as necessary too
Click to expand...
Probably the biggest limitation would be what they're set up to print the labels at. There is also something to be said for the label size being standardized between molds, from a manufacturing efficiency standpoint at least.
 
aildeokl said:
Probably the biggest limitation would be what they're set up to print the labels at. There is also something to be said for the label size being standardized between molds, from a manufacturing efficiency standpoint at least.
Click to expand...
sorry, I'm not buying any of this....
They are making these things in batches. They have already done labels in at least 3 different sizes & probably a 4th or maybe even more: For the new greek mold, the scrown, & the crappy RHC which isn't "R" & the hybrid cards (which I have not personally measured, but I am guessing based on the regular cards mold is different). There is some kid in china making like $2/day working on these things. You really think spending 30 seconds punching in a code into a printer to change the size of the labels once/20,000 chips is going to help reduce the cost of the chips?

The only real limitation is whatever we put on it.
 
Nanook said:
some kid in china making like $2/day working on these things.
Click to expand...
Well, the truth is Tina outsources the labels to India because labor is cheaper there.
The kid in India actually pushes the button on his tablet, but the printers are actually located in Indonesia, because it’s cheaper to print there.
 
1701191193448.png


I made a mock-up of the web mold using pictures of the Sandia and Riverboat chip sets. It could have been the pictures I found, but the web mold seemed a little smaller on the Sandia. I then made the inlay sizes based on chip pics as well, all sizes are estimates/rounded.

The 22.5mm was the Speakeasy inlay size, the 23mm was the Riverboat size, the 24mm is Justin's hybrid Greek mold recess size, and the 25.8mm is what Sean proposed above.

Based on this, I think 25.8mm might be too close to the inner ring, though some people may prefer that. We don't have to go with the exact proportions of the original mold, it could go out more, if we like the 25.8mm inlay.

I'd probably go 25.4mm on the inlay instead, so that it's also 1" (makes making/buying labels easier). Here's what a 1" recess would look like, if we increase the size of the web mold, making the outer ring 36mm:

1701191623307.png
 
TheOffalo said:
View attachment 1231371

I made a mock-up of the web mold using pictures of the Sandia and Riverboat chip sets. It could have been the pictures I found, but the web mold seemed a little smaller on the Sandia. I then made the inlay sizes based on chip pics as well, all sizes are estimates/rounded.

The 22.5mm was the Speakeasy inlay size, the 23mm was the Riverboat size, the 24mm is Justin's hybrid Greek mold recess size, and the 25.8mm is what Sean proposed above.

Based on this, I think 25.8mm might be too close to the inner ring, though some people may prefer that. We don't have to go with the exact proportions of the original mold, it could go out more, if we like the 25.8mm inlay.

I'd probably go 25.4mm on the inlay instead, so that it's also 1" (makes making/buying labels easier). Here's what a 1" recess would look like, if we increase the size of the web mold, making the outer ring 36mm:

View attachment 1231373
Click to expand...
I like it. I like the ring outside the sticker before we get to the mold.
Great work
1701191623307.png
 
I think personally I may prefer the original mold-to-chip proportion with 23mm recess (or 23.81mm, which would be 15/16"), but I don't mind the 1" recess with a larger mold size.

Since this is a public/community mold, I'll go with the wisdom of the crowd.
 
25.4mm (1 inch) gives designers more room to create awesome labels.

That said, I do kind of like having a chip option that is 7/8 of an inch, since the others seem to all be 1 inch.
 
SeanGecko said:
I like it. I like the ring outside the sticker before we get to the mold.
Great work
View attachment 1231379
Click to expand...
I like it too. I think it looks best when the amount of space outside the outer ring is = to the amount to the space in between the inner ring and where the sticker/label/inlay starts. This space wouldn't have to be exactly the same as in the pic above, but could be approximate too. It's just when the label comes out all the way to the inner ring it doesn't look nearly as good (of course in my opinion)
 

Create an account or login to comment

You must be a member in order to leave a comment

Create account

Create an account and join our community. It's easy!

Register

Log in

Already have an account? Log in here.

Similar threads

MrRossKeys
  • Poll Poll
New Tina Hybrid 43mm Web Mold Interest
3 4 5
Replies
128
Views
8K
ngmcs8203
ngmcs8203
justincarothers
  • Sticky
Vendor Groupbuy CHIPS* GROUP BUY*: WEB Mold, GREEK Mold * Cards Mold * No-Mold * 11/2024
2 3 4
Replies
91
Views
8K
justincarothers
justincarothers
justincarothers
Vendor Groupbuy CHIPS* GROUP BUY*: WEB Mold, GREEK Mold * Cards Mold * Textured No-Mold * 10/2024
2 3 4
Replies
113
Views
12K
PlaidDragon
PlaidDragon
justincarothers
Vendor Groupbuy CHIPS* GROUP BUY*: WEB Mold, GREEK Mold * Cards Mold * Textured No-Mold * 09/2024
5 6 7
Replies
205
Views
19K
menapamw32
M
CallingStation614
Custom Tina Web Mold | Micro Stakes Cash | Daniel's Saloon | Updated with pr0n inside
Replies
22
Views
2K
CallingStation614
CallingStation614
Back
Top Bottom