New public hybrid mold from Tina 39mm (3 Viewers)

New public Hybrid mold

  • Web

    Votes: 105 66.9%

  • Palm trees

    Votes: 27 17.2%

  • Star

    Votes: 28 17.8%

  • X

    Votes: 24 15.3%

  • Cards Mold

    Votes: 6 3.8%
  • Total voters
    157
The 43mm is larger
PXL_20240206_024315821.jpg
 
Using relative sizing (resizing the sample pics to match set diameters), it looks like the 39mm chip is using 24mm not 25.4mm labels. The red circles (33% transparency so it looks pink) are 39mm, while the yellow inner circle is 25.4mm and green inner circle is 24mm. The yellow circle definitely goes outside the label area.

1707188746356.png


For the 43mm size (in blue), the label appears to be 28mm, again using relative sizing.
 
TheOffalo said:
Using relative sizing (resizing the sample pics to match set diameters), it looks like the 39mm chip is using 24mm not 25.4mm labels. The red circles (33% transparency so it looks pink) are 39mm, while the yellow inner circle is 25.4mm and green inner circle is 24mm. The yellow circle definitely goes outside the label area.

View attachment 1268034

For the 43mm size (in blue), the label appears to be 28mm, again using relative sizing.
Click to expand...
checking blood and oil GIF
 
TheOffalo said:
Honestly, the difference between 24mm and 25.4mm is only 1.4mm or 0.055", which is less than 1/16th of an inch. So it's not like going from a THC 7/8" to RHC 1".
Click to expand...
You wouldn't think it would be much of a difference. But then there was this example.

Which I now realize was not comparing 25.4 to 24mm. 7/8ths is only 22.225mm.

1707191355848.png
 
I am currently discussing a design with them and the info I got for the web mold is:
diameter 39.3mm
middle inlay 23.8mm (So I assume recess is 24mm since I got information for printing labels from another company)
rolling edge length 122.5mm
 
SeanGecko said:
That is going to have to wait until after Lunar New Year.
If it is anything Like the Scrowns or the hat&cane I will be happy. View attachment 1264914View attachment 1264915View attachment 1264916View attachment 1264917
Click to expand...
Hey, would you mind sharing the color code for the pink in the .25s, as well as the three colors of the 5$? I'm collecting colors to use for my new project, and I struggle to match the colors form the CPC Design Tool, hard to find Ceramics that look similar, but I think those look great. Feel free to PM me fore more info.
 
goose257 said:
Are these going to be for clay or ceramic ? I enjoy the web.
Click to expand...
No one, other than GPI/Paulson, has made a new compression clay mold in probably 15 years? BCC would have been the last, right? These are ceramic with a space in the middle for a label. The purpose of the label is 2 fold. a) Better printing on Vinyl than on the "ceramic" chip material and b) it eliminates spinners as it eliminates the possibility of a high spot in the middle of the chip which is what causes spinners.

I don't yet have a sample of this web mold hybrid, but I do have samples of both the new greek and the cap-dash/Scrown and both are excellent. I would expect this one will be excellent as well.
 
Nanook said:
No one, other than GPI/Paulson, has made a new compression clay mold in probably 15 years? BCC would have been the last, right? These are ceramic with a space in the middle for a label. The purpose of the label is 2 fold. a) Better printing on Vinyl than on the "ceramic" chip material and b) it eliminates spinners as it eliminates the possibility of a high spot in the middle of the chip which is what causes spinners.

I don't yet have a sample of this web mold hybrid, but I do have samples of both the new greek and the cap-dash/Scrown and both are excellent. I would expect this one will be excellent as well.
Click to expand...
Awesome thanks for the info. New here trying to gain some knowledge.
 
CallingStation614 said:
Hey, would you mind sharing the color code for the pink in the .25s, as well as the three colors of the 5$? I'm collecting colors to use for my new project, and I struggle to match the colors form the CPC Design Tool, hard to find Ceramics that look similar, but I think those look great. Feel free to PM me fore more info.
Click to expand...
No clue. I just used the Paulson design tool and then sent it to Tina then she mocked it up and I approved it.

Had to correct her on what chips it was going on.
Newcastle HW.jpg
 
Last edited:
Nanook said:
No one, other than GPI/Paulson, has made a new compression clay mold in probably 15 years? BCC would have been the last, right? These are ceramic with a space in the middle for a label. The purpose of the label is 2 fold. a) Better printing on Vinyl than on the "ceramic" chip material and b) it eliminates spinners as it eliminates the possibility of a high spot in the middle of the chip which is what causes spinners.

I don't yet have a sample of this web mold hybrid, but I do have samples of both the new greek and the cap-dash/Scrown and both are excellent. I would expect this one will be excellent as well.
Click to expand...
Awesome thanks for the info. New here trying to gain some knowlage
 

Create an account or login to comment

You must be a member in order to leave a comment

Create account

Create an account and join our community. It's easy!

Register

Log in

Already have an account? Log in here.

Back
Top Bottom