New public hybrid mold from Tina 39mm (6 Viewers)

New public Hybrid mold

  • Web

    Votes: 105 66.9%

  • Palm trees

    Votes: 27 17.2%

  • Star

    Votes: 28 17.8%

  • X

    Votes: 24 15.3%

  • Cards Mold

    Votes: 6 3.8%
  • Total voters
    157
SeanGecko said:
View attachment 1267759View attachment 1267760View attachment 1267762
They fit in the Chipco racks and the cheaper ones I got off Amazon/eBay a decade plus ago
View attachment 1267763
43mm above fits the rack I got off of @Spinettis Gaming
Click to expand...
@TX_Golf_N_Poker that's what that last picture is of 43mm.

Had to run to work. That's the 43mm rack with the suits
PXL_20240205_193608012.jpg
 
Tallest Tina chips yet.

It would be a crime against chipping if we didn't make another one.

I'm juiced with the possibilities with Web mold ideas.
 
Do any of you have the template file for the web mold? Want to send to @timinater to see how my design would look versus the Greek Key mold.
 
SeanGecko said:
Going to need more time with them. Bringing then to work to shuffle and compare
Click to expand...

These web molds look phenomenal. If it weren’t for the nipple, I wouldn’t know they were ceramic from just pics!

I’m very curious to hear your thoughts on how they shuffle compared to the cards mold.
 
JMC9389 said:
Do any of you have the template file for the web mold? Want to send to @timinater to see how my design would look versus the Greek Key mold.
Click to expand...
I have a layered Illustrator file that you could use for mockups (not final art). If you have Illustrator, you can swap out the base chip or the label.
That goes for anyone else...PM me and I'll provide you with a link to the file.
web_mold_for_mockups.jpg
 
Last edited:
They do feel a little bit rougher than the other hybrids. Help with staking well. I am excited to get an actual set with all the colors. Going to do one set with semi gloss labels.
elemeno said:
These web molds look phenomenal. If it weren’t for the nipple, I wouldn’t know they were ceramic from just pics!

I’m very curious to hear your thoughts on how they shuffle compared to the cards mold.
Click to expand...
They shuffle better than cards mold.
 
TX_Golf_N_Poker said:
So what does the designer need? Just the dimensions of the chip and the recess?
Click to expand...

Yes, I believe the chips are the standard 39mm diameter or 43mm diameter, 3.3mm thick, like cards mold. I've kind of lost track now what the recess area are for each chip size because a couple sizes have been mentioned in the past. The label size should be a couple tenths of a mm smaller.

@SeanGecko can you reconfirm all dimensions for the 39mm and 43mm chips. Are they any different (even a tenths of a mm) than the dimensions of cards molds or no molds that designers have been designing for for years?
 
I know they're different than cards mold on height.
If you stick the cards Mold design and your good. Sticker size is same as the Greek.
PXL_20240206_021520769.jpg

All stacks of 20
PXL_20240205_194730993.jpg


Not sure about the 43mm dimensions.
Does that help.
 
SeanGecko said:
I know they're different than cards mold on height.
If you stick the cards Mold design and your good. Sticker size is same as the Greek.
Click to expand...
I thought during discussion that we decided to go with the slightly larger 25.4mm label on the Web mold rather than the 24mm like the Greek mold.
SeanGecko said:
View attachment 1268000
All stacks of 20 View attachment 1267997

Not sure about the 43mm dimensions.
Does that help.
Click to expand...
43mm Webs are supposed to be a 28mm label. That's why I'm planning to go with them, for my fairly detailed artwork.
 
It was a long time ago and I don't remember.

Edit
I think I did executive decision since the 43 mm would have a larger size went with Dave dude as Greek for ease of use in the art.
 
There have been discussions and photos that the 43mm has a 28mm recess.
The 39mm chip has a 25.4mm recess. At least that is what I have been lead to believe.
I posted this earlier, but if anyone wants the Illustrator file for mockup only, let me know. You can change the base chip or label while keeping the mold looking correct.
web_mold_for_mockups.jpg
 
Last edited:
Colquhoun said:
There have been discussions and photos that the 43mm has a 28mm recess.
The 39mm chip has a 25.4mm recess.
I posted this earlier, but if anyone wants the Illustrator file for mockup only, let me know. You can change the base chip or label while keeping the mold looking correct.
View attachment 1268006
Click to expand...
I was also going by your post of this back on page 1. And this post from Sean.
SeanGecko said:
I like it. I like the ring outside the sticker before we get to the mold.
Great work
View attachment 1231379
Click to expand...
But in the photo above, it sure looks like they are the same size as Greek mold. The larger label was one reason why I preferred Cap-Dash over Greek mold before this one was designed.

Hopefully the 43mm didn't change and stayed at 28mm.
 
TX_Golf_N_Poker said:
I was also going by your post of this back on page 1. And this post from Sean.

But in the photo above, it sure looks like they are the same size as Greek mold. The larger label was one reason why I preferred Cap-Dash over Greek mold before this one was designed.

Hopefully the 43mm didn't change and stayed at 28mm.
Click to expand...
Frustrated George Costanza GIF


Now I'm not confident in any of the sizing! :ROFL: :ROFLMAO:
We need confirmation, and soon!
@SeanGecko can you confirm the size of the recess on the 39mm web sample?
 

Create an account or login to comment

You must be a member in order to leave a comment

Create account

Create an account and join our community. It's easy!

Register

Log in

Already have an account? Log in here.

Back
Top Bottom