markleteenie
4 of a Kind
That's a nice rail. I also like how the table doesn't look to be really tall.
Why did you go with 8 cup holders and 7 hand spots? I don't play blackjack so I don't know what the typical layout is.
-
This site contains affiliate links. If you choose to make a purchase after clicking a link, Poker Chip Forum may receive a commission at no additional cost to you. Thank you for your support!
Table Showcase (pics) (43 Viewers)
- Thread starter RowdyRawhide
- Start date
Why did you go with 8 cup holders and 7 hand spots? I don't play blackjack so I don't know what the typical layout is.
Thanks,
There is a diffuser for the LED strip.
https://www.amazon.com/dp/B072HP5K3C/ref=cm_sw_r_em_apa_i_qaayEbJS32WB6
It's fairly thin. But I needed something that is Bendable around the curve. Lights are also dimmable.
2020's been busy!
Some powder coated cup holders to match the felt.
Custom base with foot rail
Topper, no legs. Actually pretty sure they had their own base they were going to use.
Made 2 of these, the last 2 of our basic 10 player tables.
A refurbished table from the closed down Edgewater casino.
Some powder coated cup holders to match the felt.
Custom base with foot rail
Topper, no legs. Actually pretty sure they had their own base they were going to use.
Made 2 of these, the last 2 of our basic 10 player tables.
A refurbished table from the closed down Edgewater casino.
I'm quite happy with this one. Solid walnut legs and dining table cover. 42"x84" for the poker table and 45"x87" for the topper. The walnut topper has a natural water based lacquer, no stain.
Not sure why the lights on the left of the outside look so funny, but it's a nice glue glow all the way around.
Not sure why the lights on the left of the outside look so funny, but it's a nice glue glow all the way around.
markleteenie
4 of a Kind
Damn, always a good job Tony! I love that table base, that's super classy.
I 'm amazed at how Tony can do really anything
. He can satisfy and make a reality of even the sickest of imaginations (either in the good or bad sense)
#1 reason for moving to (at least near) Vancouver
. He can satisfy and make a reality of even the sickest of imaginations (either in the good or bad sense)#1 reason for moving to (at least near) Vancouver
Richard Cranium
3 of a Kind
Gorgeous base on that last one
jbomb1018
Two Pair
are you able to put a link in to the company website where you got the felt from?
markleteenie
4 of a Kind
https://www.ebay.com/usr/thelayoutcompany
Edit: I originally copied it from the app on my phone, so I updated it from the PC and it seems to work now.
Last edited:
Thanks for the compliments. The table height is easily adjustable from standard chair height to barstool height as you would have in a casino. I went with 8 holders to even out the layout. Players can use either side for drinks. Usually not every player is drinking at the same time.
For some reason, Mark's link isn't working for me so try this one too:
https://www.ebay.com/sch/thelayoutcompany/m.html?ssPageName=STRK:MEFSXS:MESOI&_trksid=p2053788.m1543.l2654
And @justsomedude has had success dealing with them via email to find multiples or possibly unlisted items as their eBay page is very much a backburner project that they don't spend a ton of time adding new inventory to unless someone has some free time.
Jeevansluck
Royal Flush
I'd like to throw my hat in the ring, I don't have any bells and whistles with my tables like fancy buttons and lights...but they are poker tables and here is the pr0n..
Raised and suede rail, custom felt - all the bells and whistles you need brotha. Very nice tables
Really nice chairs too
Love the blue and grey, Nav. Simple and classy. One day I’ll be there when you felt the Empress Star set.
Jeevansluck
Royal Flush
That is a dream Scott! You are sooooo more than welcome! One fine day. I'm itching to get the ES out. I've expanded a bit too.Love the blue and grey, Nav. Simple and classy. One day I’ll be there when you felt the Empress Star set.
Right now my master plan for tables comes in a few stages:
1) design a custom, collapsible roulette table
2) re-design and re-felt a poker table topper, with good sturdy legs
3) re-design a back-up blackjack table on an existing template
Give a crap-ton of money to @T_Chan to make all this a reality
1) design a custom, collapsible roulette table
2) re-design and re-felt a poker table topper, with good sturdy legs
3) re-design a back-up blackjack table on an existing template
Give a crap-ton of money to @T_Chan to make all this a reality
Nice thread! I love tables, almost obsessed with them.
Poker tables (4'x8'):
Main Table:
View attachment 74754
Secondary poker table (4'x8') (doubling as a table game table for casino night in the pic) (bought this one and immediately resurfaced it)
View attachment 74750
Craps table (10x5'):
View attachment 74749
Roulette table (4'x8'):
View attachment 74755
Nice tables! Is that a Brybelly roulette wheel?
Don't forget a sweet ass base too. Sexy table!
Bobb59
Full House
with my chips
jbomb1018
Two Pair
Nice table!
davethesave
3 of a Kind
@Richard Cranium
I just watched the entire video. Amazing build, video, edit and I am just blown away. I love how you showed everything. I am not nearly as handy, but I am willing to give it a try perhaps...
is there a list of every tool, materials, sprays, etc, that you used..?
I would love to try to undertake this challenge and build a table that can easily be refelted anytime... although pulling old staples out may be annoying!
love that video!!!!! I may watch it every day for inspiration!
I just watched the entire video. Amazing build, video, edit and I am just blown away. I love how you showed everything. I am not nearly as handy, but I am willing to give it a try perhaps...
is there a list of every tool, materials, sprays, etc, that you used..?
I would love to try to undertake this challenge and build a table that can easily be refelted anytime... although pulling old staples out may be annoying!
love that video!!!!! I may watch it every day for inspiration!
jbomb1018
Two Pair
I'm getting started on my own table, where is this video?
jbomb1018
Two Pair
Thank you!
Richard Cranium
3 of a Kind
Hey @davethesave - thanks for the kind post.
Lots of table building info / tutorials / threads at this site and others. Follow those, and you're golden getting a table built. Go slow, don't rush it and think everything through before cutting and you'll build something you will be happy with. Get better by doing.
Some of the tools and materials I used are listed in the video description at youtube. Full disclosure, they're listed as affiliate links so clicking them and buying something helps me out with a small kickback.
Here's a partial quick list of the stuff I used - your needs will vary depending on the table you want to build and the tools you have or can source.
Circular saw - I used this to cut down the plywood sheets to the size I wanted. You may not need to do this if you build a table at full sheet size. To make the cuts cleanly I used a large T-square straight edge. They sell the t-squares and straight edges at the box stores. You don't need to use that though, you can use the second plywood sheet like I did at other times. No circular saw? Use a router or a jigsaw.
Router - my router has both a fixed and plunge style base and for this job I used the plunge base. I made my own circle jig to cut the circles but I have also used store bought jigs. either works, depending on budget and what you want to do. I also used a straight guide for the router. It was easier than using the plywood as a straight guide but both works, so you don't have to buy this. My router set came with it. I used two router bits during this job, mostly a 1/4" spiral upcut bit for the through cuts and a 1/4" roundover bit for easing the edges before upholstery of the rail. Don't have / want to use a router? Use a Jigsaw. If you use a jigsaw, you can even just mark the circle with a string and cut it out.
Table saw - I used this to help cut down some scrap wood to make my spacers and the bracing for under the table. Not necessary you can use the circular saw or skip these steps entirely.
Cordless Drill and Impact Driver. Hammer or mallet. Kreg pocket hole jig - not necessary for most table builds. especially if you use the extra plywood cutout underneath method for bracing. I was trying to save on weight so I didn't go that route.
Clamps, lots of clamps. You could maybe get away without them but there's no fun in that.
Brad nailer and an upholstery stapler. The air compressor to power them. You can use a manual stapler, but I wouldn't unless you hate yourself and want to endure lots of frustration and pain. I used a nailer but it isn't really necessary. At one point I didn't want to wait for the glue to dry so I used the nailer so I could keep moving forward.
Wood glue, spray adhesive. bolts and threaded inserts.
Electric turkey carving knife - cuts through foam EASY. Also a utility knife is handy for the vinyl and felt.
Last edited:
BruceWayne
Flush
Standby ...
SeanGecko
4 of a Kind
Hope you don't mind @bsdunbar1
Very excited.
Very excited.
Attachments
Create an account or login to comment
You must be a member in order to leave a comment
Create account
Create an account and join our community. It's easy!
Log in
Already have an account? Log in here.
Similar threads
