Upcoming molds......... (24 Viewers)

[PlaidDragon]

I'll be doing 600-700 s crown mid aug me thinks.

Sounds good. I'll shoot for about the same time. Project funding is up to 64%. If I drive my eBay sales hard enough I should reach my target by then.

Inlay artwork doesn't have to be solidified at the time of payment right (that is, if the desired mold isn't currently queued) ???

 

[hod]

I heard back from David Spragg and he said: "Next molds would be out of Scroll, H and HHR."

HHR! HHR! HHR!

 

[RainmanTrail]

If it matters for scheduling, I'll commit here that I'm going to be ordering a new inlayed set of 800-900 on scrown. I'll be ready by late July.... mid August, latest.

I'll be doing 600-700 s crown mid aug me thinks.

I also have an scrown order ready to go. Planning to double down on my Cali Rounders tourney set since they exceeded my expectations. Might play around with a different bounty chip or a 25k chip or something like that too. Not sure yet, but I'll definitely be ordering several more racks of these.

IMG_20190504_184953.jpg

• RainmanTrail
• May 4, 2019
• 1

IMG_20190504_202545.jpg

• RainmanTrail
• May 4, 2019
• 2

 

[PlaidDragon]

Cool. That’s three scrown orders.

I’d think a some 25k’s would look good in your set. Perhaps:

 

[hod]

I heard back from David Spragg and he said: "Next molds would be out of Scroll, H and HHR."

I've got a 600 chip set waiting for Diamond Square and he said that we need 1500 for him to do the setup. If you're interested in Diamond Square, message me. Thanks!

@Coyote: You still interested in Diamond Square?

David, any update what mold is in/ up next?

Asking for a friend...

 

[Saoliver]

Any word on the next run of the jockey mold?

 

[warma]

Bump

 

[David Spragg]

Not much point bumping a thread that is 14 months old that I only stumbled on by chance as I wasn't tagged.
What particularly was you asking about?

 

[JMC9389]

Not much point bumping a thread that is 14 months old that I only stumbled on by chance as I wasn't tagged.
What particularly was you asking about?

Since you're here, any chance of the 44mm A-molds running this year?

I know things are super behind but just curious is all.

I'm also looking to put in a B-mold order as well David. How much time do I have to submit the order to make it into the next run? Thank you and hope all is well!

 

[BarrieJ3]

I’m going to need one of @Toby and @Hornet done this year, one of them next year.

Just so I don’t have to vote against one of them come custom set of the year.

 

[David Spragg]

Since you're here, any chance of the 44mm A-molds running this year?

I know things are super behind but just curious is all.

I'm also looking to put in a B-mold order as well David. How much time do I have to submit the order to make it into the next run? Thank you and hope all is well!

The 44mm's are going to run in a couple of months at most.
BDiamond sometime in the first half of next year but I want orders in the next month really in case it does come sooner or later. Circumstances continue to mean we may have to flip the order of things at short notice hence wanting to be ready.

 

[Darson]

David, is it too late to get on the next small crown run? If not, when would you want orders by?

 

[warma]

Not much point bumping a thread that is 14 months old that I only stumbled on by chance as I wasn't tagged.
What particularly was you asking about?

I see a lot of chatter on what’s in the queue when in multiple threads. Just trying to revive this one to centralize it. Seems it might be useful. It will be a bit before my next order, so was just trying to help out.

 

[JMC9389]

The 44mm's are going to run in a couple of months at most.
BDiamond sometime in the first half of next year but I want orders in the next month really in case it does come sooner or later. Circumstances continue to mean we may have to flip the order of things at short notice hence wanting to be ready.

Thank you David, I'll be sending an email in the coming days. I can have my order in by the end of this month if that is ok.

 

[markleteenie]

I see a lot of chatter on what’s in the queue when in multiple threads. Just trying to revive this one to centralize it. Seems it might be useful. It will be a bit before my next order, so was just trying to help out.

Maybe a new stickied thread where @David Spragg can update what molds are likely to run next with cutoff timelines for orders? All tentative guidelines, of course.

 

[David Spragg]

Maybe a new stickied thread where @David Spragg can update what molds are likely to run next with cutoff timelines for orders? All tentative guidelines, of course.

One reason I would not do that is that too many people believe 'tentative' means actual and then they start demanding delivery by a fixed date or a refund and it screws up scheduling which then affects everyone else.

 

[David Spragg]

Thank you David, I'll be sending an email in the coming days. I can have my order in by the end of this month if that is ok.

For which? 44mm or BDiamond?
I'd need 44mm in 2 weeks. End of the month ok for BDiamond.

 

[David Spragg]

David, is it too late to get on the next small crown run? If not, when would you want orders by?

Not too late but I can't specify a time yet. End of the month would be nice if you can manage it.

 

[Darson]

Not too late but I can't specify a time yet. End of the month would be nice if you can manage it.

Thank you David! I'll get my order in before the end of the month.

 

[JMC9389]

For which? 44mm or BDiamond?
I'd need 44mm in 2 weeks. End of the month ok for BDiamond.

I already have an 800 chip order in for the 44mm's. Eagerly awaiting these

I was referring to placing a new B diamond mold order. Likely going to be in the neighborhood of 1000 chips.

 

[David Spragg]

I already have an 800 chip order in for the 44mm's. Eagerly awaiting these

I was referring to placing a new B diamond mold order. Likely going to be in the neighborhood of 1000 chips.

Yes, that's why I checked what you meant. End of the month would be nice.

 

[Nex]

How does the order queue currently look like for HCE and FDL molds? About how many more until there are enough for a run?

 

[David Spragg]

FDL is running in a couple of months, cut off was last week.
HCE was not that long ago so will probably be 4-6 months and needs more orders.

 

[johnnycnote]

DIAMSQR run soon?

 

[David Spragg]

Probably starting in 2-3 months also. Cut off gone for that.

 

[Irish]

For which? 44mm or BDiamond?
I'd need 44mm in 2 weeks. End of the month ok for BDiamond.

Are both 44mm molds being run?

 

[David Spragg]

Are both 44mm molds being run?

Regrettably, yes.

 

[JMC9389]

Regrettably, yes.

Yay! That makes @Irish and I happy even if regrettable for other reasons!

 

[David Spragg]

Yay! That makes @Irish and I happy even if regrettable for other reasons!

Maybe I should make you two wait another year as you were the only customers for it

 

[JMC9389]

Maybe I should make you two wait another year as you were the only customers for it

Haha I'm all set. I made sure I got my add on order in a few weeks ago because I know it may be years before the oversize molds run again!