Completed CHIPS* GROUP BUY*: WEB Mold, GREEK Mold * Cards Mold * Textured No-Mold * 05/2024 (6 Viewers)

[maneframe150]

Question. When it comes to "custom" inlays on these chips, I have many questions and when I search through the forum, I end up with more questions than answers. If someone could enlighten me, I would greatly appreciate it!

I like the "Sands" chips...colors, edge spots, etc.

Could I put a custom inlay on those exact chips, or am I relegated to only using the blank options in the link above?

I have an .ai file of my poker club name and a pretty simple image to go along with it. Who would I get with to turn that into an inlay with denominations?

Then, once completed, and I have the .ai files of my inlays, how do I get them on the chip or even a mockup showing what they would look like on the chip before pulling a $1,000.00+ trigger on them?

I've seen where there is a company, Gear Labels, but they appear to be someone I'd get with if I already had my chips. From what I understand, I could submit the files with my order to Justin and the labels would be created and put on the chips in the manufacturing process? Is that right?

I basically need a baby-fied, step by step to get my label, after I find someone to create it, on my chips I order from Justin. Thanks in advance!!!

 

[justincarothers]

Question. When it comes to "custom" inlays on these chips, I have many questions and when I search through the forum, I end up with more questions than answers. If someone could enlighten me, I would greatly appreciate it!

I like the "Sands" chips...colors, edge spots, etc.

Could I put a custom inlay on those exact chips, or am I relegated to only using the blank options in the link above?

I have an .ai file of my poker club name and a pretty simple image to go along with it. Who would I get with to turn that into an inlay with denominations?

Then, once completed, and I have the .ai files of my inlays, how do I get them on the chip or even a mockup showing what they would look like on the chip before pulling a $1,000.00+ trigger on them?

I've seen where there is a company, Gear Labels, but they appear to be someone I'd get with if I already had my chips. From what I understand, I could submit the files with my order to Justin and the labels would be created and put on the chips in the manufacturing process? Is that right?

I basically need a baby-fied, step by step to get my label, after I find someone to create it, on my chips I order from Justin. Thanks in advance!!!

Yes, you can use the Sands chips and put any label you want on them. You can use any of the chips with a different label for that matter.

I will leave a list below of designers who can help you create your label. they would be able to mock it up to see what it will look like as a finished product.

We can get the chips and labels made for you and they applied during production.

Here are some designers. Hopefully one of them has time to help you out and will chime in. @timinater @Colquhoun @iLogik @tallsbutler @mattross1313

 

[maneframe150]

Yes, you can use the Sands chips and put any label you want on them. You can use any of the chips with a different label for that matter.

I will leave a list below of designers who can help you create your label. they would be able to mock it up to see what it will look like as a finished product.

We can get the chips and labels made for you and they applied during production.

Here are some designers. Hopefully one of them has time to help you out and will chime in. @timinater @Colquhoun @iLogik @tallsbutler @mattross1313

Thank you sir!

 

[PokerLegend]

Big Top Poker
Greek mold

200 × t100
120 × t500
140 x t1000
100 x t5000
I want it to look like the chip on the right side in the picture. Not sure what type of label that is. Not sure if it uploaded correctly. But I want the one that looks smooth va textured

 

[CallingStation614]

Who's the owner of the Starnite design?

Are there any pictures of it already on web/greek mold? (Tourney design)

 

[justincarothers]

Who's the owner of the Starnite design?

Are there any pictures of it already on web/greek mold? (Tourney design)

You will need to order the Starnite through this group buy. We have some in production now but no photos yet

 

[justincarothers]

Sunset Beach 39mm Web Mold Semi-Gloss

100 x 25c
200 x $1
200 x $5
75 x $20
25 x $100

You need a few more posts before I can send you a message with your invoice

 

[justincarothers]

Hi I wanted to ask if these stardust chips were available if so, I'd like to place an order as followed


Stardust - Textured No Mold - 39mm

150 x $1
100 x $5
75 x $25
50 x $100
25 x $500

Total Chips = 400

View attachment 1321909

You need a few more posts before I can pm you your invoice

 

[CatchNRelease]

Just got my semi custom changes back from @tallsbutler and I am so excited to see these in person!!!!!

Can not wait!!!

 

[PricklyGrape]

You need a few more posts before I can pm you your invoice

Hi, I think I should be cleared now

 

[atrodex]

What's the minimum you have to order to do some 39mm and some 43mm?

I'd like to get a barrel or two of the 43mm, but have the rest be 39mm.

 

[atrodex]

Also do you post approximately what the labeling fee split is currently for a certain set (e.g. 39mm white sands)?

 

[Cratty]

Well shit.. I think I'm going to add a few more to try out. Edit... expanding to full set, yes I have a problem.

43mm Web Mold, Semi-Gloss Inlay:
125 x 1
225 x 5
325 x 25
225 x 100
125 x 500
75 x 2,500
50 x 10,000
50 x 25,000
Total: 1200

See PM's!

 

[redstar]

How thick are these chips? The racks I have are home made and a bit narrow. Paulson fit great. Milanos or Majestica fit pretty well, but Monte Carlo smooths only fit 19 across instead of 20 which is annoying. I think 3mm is perfect, 3.1 fits tightly. Anything bigger than that won’t work for me.

 

[Venturalvn]

Well shit.. I think I'm going to add a few more to try out.

43mm Web Mold, Semi-Gloss Inlay:
25 x 1
25 x 5
25 x 25
25 x 100
25 x 500
25 x 2,500
25 x 10,000
Total: 175

See PM's!

View attachment 1324434

Dude... cool

 

[CallingStation614]

Well shit.. I think I'm going to add a few more to try out.

43mm Web Mold, Semi-Gloss Inlay:
25 x 1
25 x 5
25 x 25
25 x 100
25 x 500
25 x 2,500
25 x 10,000
Total: 175

See PM's!

View attachment 1324434

Dibs sample

 

[greedyintern]

Alright, moving forward with the Panda KGB set!

Files sent via DM.

39mm Webmold, Semi Gloss labels
25 - $0.05
200 - $0.25
200 - $1
200 - $5
250 - $25
250 - $100
150 - $500
150 - $1000
50 - $5000
25 - $25000
25 - Bounty
75 - KGB
Total = 1600

 

[Dodger]

Well shit.. I think I'm going to add a few more to try out.

43mm Web Mold, Semi-Gloss Inlay:
25 x 1
25 x 5
25 x 25
25 x 100
25 x 500
25 x 2,500
25 x 10,000
Total: 175

See PM's!

View attachment 1324434

 

[greedyintern]

Jump on in @BobbyVegas @tastytoast @illi @57chevy and anyone else to get that label fee down

 

[ChrisTot]

Well shit.. I think I'm going to add a few more to try out.

43mm Web Mold, Semi-Gloss Inlay:
25 x 1
25 x 5
25 x 25
25 x 100
25 x 500
25 x 2,500
25 x 10,000
Total: 175

See PM's!

View attachment 1324434

Love that 100

 

[CatchNRelease]

Ok, I’ll tack on to the KGB label too

Please add to my order with airship

39mm web mold with panda KGB label

100x 25c
250x $1
175x $5
75x $25

600 total

Also add 6 more of the 39mm racks please

 

[justincarothers]

What's the minimum you have to order to do some 39mm and some 43mm?

I'd like to get a barrel or two of the 43mm, but have the rest be 39mm.

Also do you post approximately what the labeling fee split is currently for a certain set (e.g. 39mm white sands)?

You have to order in multiples of 25. Label fee for white sands is at $80 as no one else has ordered this go around

 

[Labrat]

Taj Mahal Card Mold 39mm

150 Pink .25
150 White 1.00
200 Red 5.00

500 total

 

[BobbyVegas]

Jump on in @BobbyVegas @tastytoast @illi @57chevy and anyone else to get that label fee down

View attachment 1324476

Ahh you're the man! Thanks

 

[Barth]

Panda KGB/39mm/Web Mold

100 - $100
100 - $500
100 - $1000
100 - $5000
100 - $25000
500 total

Please add - (5) 40mm Justin racks

 

[Goosefraba]

Alright, moving forward with the Panda KGB set!

Files sent via DM.

39mm Webmold
25 - $0.05
200 - $0.25
200 - $1
200 - $5
250 - $25
250 - $100
150 - $500
150 - $1000
50 - $5000
25 - $25000
25 - Bounty
75 - KGB
Total = 1600

View attachment 1324473

Any way I’d be able to get a sample set?

 

[SeanGecko]

Web Mold with Semi Gloss. RULES!!! Hop on board the web mold train!!!!

 

[RedDirtBo]

I'll hop on the Panda KGB train.
Web mold, 39mm

150 X 5c
150 X 25c
125 X $1
75 X $5

500 total.

 

[shekki]

I'll join for those Panda KGB if I may

39mm Web Mold
$.25 - 100
$1 - 200
$5 - 200
$25 - 75
$100 - 25
Total = 600

 

[Hot Nuts]

I'll join for those Panda KGB if I may

39mm Web Mold
$.25 - 100
$1 - 200
$5 - 200
$25 - 75
$100 - 25
Total = 600

Those are nice. I'm going to do a black label tribute. Was going to use a polar bear for white contrast or a buffalo like the one on a Buffalo Trace bottle, but I think I've landed on something completely different. I'm doing the black chip as the $1 chip (my favorite in the line up) so it sees plenty of play.