-
This site contains affiliate links. If you choose to make a purchase after clicking a link, Poker Chip Forum may receive a commission at no additional cost to you. Thank you for your support!
Custom artwork group buy. US/CAN CARDS MOLD (15 Viewers)
- Thread starter SeanGecko
- Start date
Same. I like the spots on those. May make a set using those spots
albatros63
Straight
Here it is !
Amazing value for money full custom chips, you wont be disappointed
My favorite is the T5k
Amazing value for money full custom chips, you wont be disappointed
My favorite is the T5k
Last edited:
Yeah, I’m ready for another set.
Kid_Eastwood
4 of a Kind
All of these chips are turning out so great. Well done.
Do you find that the edge spots are aligned well? Is each chip just off a bit? Or just some chips are misaligned? Either way, such a great value for these.
albatros63
Straight
Some are slightly misaligned as you can see on pics but alignement is pretty correct overall.
Good enough for me.
These turned out amazing!
I might have to get something for the club here.
Jambine
Full House
LOL
albatros63
Straight
Perfect option for poker clubs imo
SteveHNo96
Flush
Sunfly is pretty balls out amazing for pricing of full custom chips. Good pick.
TheDuke
Full House
Sunfly does make great chips. But these aren't Sunfly.
SteveHNo96
Flush
I Stand corrected. I know they do have a faux clay design not dissimilar to that design with the cards. In fact, that's what my second custom set was to be on was faux clay with the cards design. I'll have to get pricing on whatever this is.
Observations:
1) I definitely think PCF should think about a new mold (at least consider it). Not that card mold isn’t nice but I feel like we have enough future purchases that the cost of a new mold could be spread out fairly evenly.
2) Tina and Co should think about expanding their operations ASAP cause I feel like they're going to be working 24/7 for the next 4 months at least
3) I've already mapped out my next 4 purchases totaling more than 5000 chips
PS they look amazing !
1) I definitely think PCF should think about a new mold (at least consider it). Not that card mold isn’t nice but I feel like we have enough future purchases that the cost of a new mold could be spread out fairly evenly.
2) Tina and Co should think about expanding their operations ASAP cause I feel like they're going to be working 24/7 for the next 4 months at least
3) I've already mapped out my next 4 purchases totaling more than 5000 chips
Do you know what % might be?
PS they look amazing !
Still can't get over the close up barrel shots, so hawt, so hawt.
Pricing is outstanding! my 1700 chip set cost $495 (29 cents/chip) plus shipping cost from Sean once they arrive. Stay tuned. I expect group buy #2 will be kicking off before too much longer. The excitement and anticipation this buy is generating has brought a lot more folks here who missed out on the first one. (over 50 sets being produced - 70,000+ chips!)
- Joined
- Nov 22, 2018
- Messages
- 13,672
- Reaction score
- 29,427
- Location
- 129 West 81st Street, Apartment 5B
Damn sorry, I just found out that GB #2 is full, we're still squeezing in folks from the first run though. GB# 3 just filled up yesterday as well. We'll make sure to go ahead and notify Steve when GB#4 is getting underway, we're scheduled for 2nd quarter in 2021 right now.
albatros63
Straight
Eloe2000
Straight Flush
Observations:
1) I definitely think PCF should think about a new mold (at least consider it). Not that card mold isn’t nice but I feel like we have enough future purchases that the cost of a new mold could be spread out fairly evenly.
2) Tina and Co should think about expanding their operations ASAP cause I feel like they're going to be working 24/7 for the next 4 months at least
3) I've already mapped out my next 4 purchases totaling more than 5000 chips
Do you know what % might be?
PS they look amazing !
Did someone say “coke giraffe” mold?
In all seriousness, I think this is worth exploring further. Weren’t there numbers somewhere in this thread several hundred pages ago about custom mold costs, or no? I am curious what that number is.
It's an active mold for clay chips. No one would ever confuse a clay chip with a ceramic chip.
No offense, but to each their own. I don't hate it, but personally would prefer something that is more unique or hasn't been done yet.
@ReallyGoodUsername have you seen this thread: https://www.pokerchipforum.com/threads/polyclay-custom-molds.56544/
Some interesting ideas here. I really like the list of conditions set out by @BGinGA especially an attempt to get a chip with sharper edges. Although he wants to do a hybrid style chip with a laminated center label. And is leaning towards using Sun-Fly. So this is going to end up being a higher end item, not the no-brainer, bottom basement pricing we have here with Cards mold. I think there could be room for both - a higher end hybrid chip and a lower priced polyclay chip, both with new custom molds.
It's being explored. See my link in the above post.
SteveHNo96
Flush
29c a chip + shipping? So these are basically China Clay/ Scroll ceramic quality?
Interesting. Normally I use the quality of ABC/ BRPro ceramic or higher but LMK how they hold up with regular use and I'll look into it.
I only went with Sun-fly for my custom set because 1) the price was livable, 2) apparently even though they are light chips they can withstand a lot (except apparently a 500 pound man slamming his fist on the table or a hammer taken to it) and 3) I wasn't going to be playing treasure hunter for 3-4 years to get a set going.
TheDuke
Full House
I wouldn't equate pricing on this card mold GB to the quality (or lack thereof) of scroll ceramics.
Print quality of these vs scroll ceramic is much different.
Create an account or login to comment
You must be a member in order to leave a comment
Create account
Create an account and join our community. It's easy!
Log in
Already have an account? Log in here.
Similar threads
