• This site contains affiliate links. If you choose to make a purchase after clicking a link, Poker Chip Forum may receive a commission at no additional cost to you. Thank you for your support!

Custom artwork group buy. US/CAN CARDS MOLD (12 Viewers)

StaggerLee said:
This sounds awesome. At this point, I have zero experience with artwork. What are the options of piggybacking anybody else's art? I know the Aces are a thing... I'm also aware of the creative tools, I'm just not creative when it comes to this stuff. Especially in the time frame. If I'm just being a tool or ultra lazy, call me out. Otherwise, any direction would be helpful. I'm interested in 1-1.2k
Click to expand...
I’m with you on the art and creativity. But I downloaded the artwork from the Aces GB and got the free 7 day trial of Adobe Illustrator and was able to change the name and locations etc pretty easily.
 
Bluegrass Poker said:
I’m with you on the art and creativity. But I downloaded the artwork from the Aces GB and got the free 7 day trial of Adobe Illustrator and was able to change the name and locations etc pretty easily.
Click to expand...
That's a good idea! Maybe I'll give it a try aswell!
 
I am really excited about all the possible art that will get developed. Tracking will be sent tonight. After I get this paperwork done.
 
Squidge said:
Following and very interested in these probably with the Aces artwork. Will post later with chip counts or questions.

@AnteAndy Did you edit that blue frac you showed off earlier to have fewer edge marks than the original? The AI Doc has it with 8 marks instead of 4 but I like yours better!
Click to expand...
So the designs that you have from the original designer are the first draft versions of the chips. He later revised them but for some reason didn't save or share with us. But all you do is just remove the diagonal edgespots from the primary quarters and that's it. Make sure you remove the correct ones on the side of the chip, too.
 
Hi guys I ran a Group by for these buttons last year while I don’t have any spares I do have the artwork so you can get the buttons made If you want.
6C25B22D-3801-4717-9F40-FB597016019D.jpeg

2E774E50-2E7E-4D21-A9CB-9268344472B3.jpeg
 
Nuhockey said:
Hi guys I ran a Group by for these buttons last year while I don’t have any spares I do have the artwork so you can get the buttons made If you want.
View attachment 480819
View attachment 480820
Click to expand...
I’m interested in getting the artwork...I’ve been trying to teach myself illustrator and would love to see how you did these if you made it in illustrator. (I won’t steal the design...just curious about how they were made)
 
HeWhoWouldPun said:
I’m interested in getting the artwork...I’ve been trying to teach myself illustrator and would love to see how you did these if you made it in illustrator. (I won’t steal the design...just curious about how they were made)
Click to expand...
Hi didn’t do the design, but I got them from the designer. I can send the artwork for you to look at. Just PM me your email.
 
AnteAndy said:
I assumed the same thing too, where I reworked the colors and designs on the Aces Tourney set, and asked their CS if they can print a sample with the colors provided, which I used only from what was available in the color wheels. They told me they couldn't use the colors since my specific colors weren't in their system for printing.
Click to expand...
So ... where can I see the colors that are available?

And not just see the colors ... can we get the codes for each available color?
 
Last edited:
Can you check on the dimensions on the plaque, also? Pretty please?
 
AnteAndy said:
There should be listing of dimensions on the AI Aces files for the plagues at least.
Click to expand...
Maybe the file links and all of this info could be posted to the OP? Would be helpful to have everything in one place. I have no idea where to look for that.
 
Just so I'm understanding this directly, this is a ceramic chip with a printed top and bottom, however each person would like, but using the colors the manufacturer can print. Then the chips have edges that are aligned with the printing so that the effect simulates edge spots when mated up with how the image is printed. This chip comes on the card mold instead of a flat mold like you might get from another ceramic vendor. Is this all correct?

Are their minimums for the qty of each chip each person wants?

If you are sending out more samples I'd be interested in checking them out if someone around DC wants to fwd theirs to me I can take a look and then send them home.

Dave
 
SeanGecko said:
Where are you located currently?


@justincarothers I think you're the closest can you and @Bluegrass Poker get the shipping figured out? Then message me and send it back when you're done @Bluegrass Poker
Click to expand...
Im in US military base in Japan, still standard lower for 48 shipping rates though,doesn't count as international at the post office. Just takes a bit longer to trickle through the military mail system.
 
JustDave said:
Just so I'm understanding this directly, this is a ceramic chip with a printed top and bottom, however each person would like, but using the colors the manufacturer can print. Then the chips have edges that are aligned with the printing so that the effect simulates edge spots when mated up with how the image is printed. This chip comes on the card mold instead of a flat mold like you might get from another ceramic vendor. Is this all correct?

Are their minimums for the qty of each chip each person wants?

If you are sending out more samples I'd be interested in checking them out if someone around DC wants to fwd theirs to me I can take a look and then send them home.

Dave
Click to expand...

This is my understanding as well. You can supply your own full chip and “inlay” artwork or Bosco has allowed us to use all of the Aces and custom Aces artwork as well.
 
JustDave said:
Just so I'm understanding this directly, this is a ceramic chip with a printed top and bottom, however each person would like, but using the colors the manufacturer can print. Then the chips have edges that are aligned with the printing so that the effect simulates edge spots when mated up with how the image is printed. This chip comes on the card mold instead of a flat mold like you might get from another ceramic vendor. Is this all correct?

Are their minimums for the qty of each chip each person wants?

If you are sending out more samples I'd be interested in checking them out if someone around DC wants to fwd theirs to me I can take a look and then send them home.

Dave
Click to expand...
Yes 25 chips per design minimum.
 
Hi Sean I have a design and was going to get a Ceramic set from one of the vendors on here, but the price of these is ridiculously good. 30 Cent a Chip right? My Ceramic Design is not meant to be just an Inlay, but the design is going to take up the whole chip. Can can they print my design on the whole chip where it does not appear to have an recess and an inlay? Can they also do edge printing on the rolling edges? I was not planning on doing edge spots on the chip, but printing on the rolling edges with words. Will they align the printing on the chips? So if it is flipped over the designs would align. Also if I were not to use the card mold could you pm which vendor it is in Alibaba?

Thanks for your time,
 
Nuhockey said:
Can can they print my design on the whole chip where it does not appear to have an recess and an inlay?
Click to expand...
The card mold has eight artistic card pairs where the outline of the cards is recessed, and a recessed outline of an inner circle. The center area for the 'inlay' is not recessed; it is the same thickness as the rest of the chip..

polyclay-cards-mold.jpg
 
I think the Diamond mold is bourgeoisie. Cards mold is understated and more general symbol of gambling or the card games I played with my late grandmother.
 
Nuhockey said:
Hi Sean I have a design and was going to get a Ceramic set from one of the vendors on here, but the price of these is ridiculously good. 30 Cent a Chip right? My Ceramic Design is not meant to be just an Inlay, but the design is going to take up the whole chip. Can can they print my design on the whole chip where it does not appear to have an recess and an inlay? Can they also do edge printing on the rolling edges? I was not planning on doing edge spots on the chip, but printing on the rolling edges with words. Will they align the printing on the chips? So if it is flipped over the designs would align. Also if I were not to use the card mold could you pm which vendor it is in Alibaba?

Thanks for your time,
Click to expand...
I refer back to this video
v2-Hardwell Underground Sets_Original.jpg

v2-Hardwell Underground Sets_Original.jpg

  • Media owner SeanGecko
  • Date added
 

Create an account or login to comment

You must be a member in order to leave a comment

Create account

Create an account and join our community. It's easy!

Register

Log in

Already have an account? Log in here.

Similar threads

S
Interest Aria tribute 39mm - Diamond Mold (tournament denominations)
Replies
2
Views
920
slimshady4239
S
justincarothers
  • Sticky
Vendor Groupbuy CHIPS* GROUP BUY*: WEB Mold, GREEK Mold * Cards Mold * No-Mold * 12/2024
2
Replies
43
Views
3K
Barberp
Barberp
justincarothers
Vendor Groupbuy CHIPS* GROUP BUY*: WEB Mold, GREEK Mold * Cards Mold * No-Mold * 11/2024
2 3 4
Replies
112
Views
11K
Containedpenny
Containedpenny
justincarothers
Vendor Groupbuy CHIPS* GROUP BUY*: WEB Mold, GREEK Mold * Cards Mold * Textured No-Mold * 10/2024
2 3 4
Replies
117
Views
13K
NotRealNameNoSir
NotRealNameNoSir
T_Chan
Wall art
Replies
14
Views
1K
Wifey
Wifey
Back
Top Bottom