Vendor Sale RACKS* Justin Chip RACKS (3 sizes) *IN STOCK* (6 Viewers)

[Colquhoun]

So I took a chisel to the little vertical bars on one slot in one rack, scraping away 8 little bars. Worked quite well but looks quite ugly.

I’m gonna to look around and see if I can find a neater way. Might try a relatively high grit sand paper and some elbow grease.

View attachment 1133196

View attachment 1133197

Wow, when I made the earlier post about the edges of the racks , i was looking at the 50mm one I have, and it has none of those bars. I thought you were referring to something else.

Removal of those bars would definitely give you more space, but I can’t see a way to do it cleanly. Agreed about a fine grit sandpaper, and maybe a plastic polish.
Quite a bit of work, indeed.

 

[FestiveKnight]

Wow, when I made the earlier post about the edges of the racks , i was looking at the 50mm one I have, and it has none of those bars. I thought you were referring to something else.

Removal of those bars would definitely give you more space, but I can’t see a way to do it cleanly. Agreed about a fine grit sandpaper, and maybe a plastic polish.
Quite a bit of work, indeed.

I only have 7 racks I’d have to do. Not crazy for a set you plan to have around for a good while

 

[BamaT8ter]

I'll take 100 90 more of the 40mm when they come back in stock.

 

[kimbless]

Please do. Might be interested in these for BCC chips too.

My flame mold chips are kinda worn but they fit in them perfectly. 20 to the barrel with a little bit of wiggle room.

 

[BamaT8ter]

My flame mold chips are kinda worn but they fit in them perfectly. 20 to the barrel with a little bit of wiggle room.

FWIW, my BCC suits molds fit just fine. A few barrels were a bit snug. My CSQ, HHR, and Roman molds also fit just fine.

 

[WoodenMonkeyLamp]

I’ll take

10x 40mm

when back in stock

 

[97destroyer]

I'll take 15 more 40mm cases

 

[natumes]

I'll take another 40 x 40mm, these are great

 

[Chipnut]

Put me down for 10 more 40mm. Thanks

 

[SiouxperStack]

Where the hell is the rack Pr0n? We want to see what you all are holding.

 

[RansomStoddard]

Redid my Apache cases, now I need more.

50 x 40mm please.

 

[justincarothers]

Where the hell is the rack Pr0n? We want to see what you all are holding.

There are quite a few good pictures in this thread if you scroll all the way through

 

[SiouxperStack]

Here’s one set-

 

[Colquhoun]

The 50mm racks are great for storing 47mm ceramic accessory chips.

 

[davislane]

can i put myself down for one of each size and ship once the 40mm come back instock.

 

[BluffaloBill]

I'll take 1x50mm and 40x40mm when the next set of 40s comes in. Thanks!

 

[Annorax]

Thickness 3.3mm... do these fit PGI 8Vs 20 to a barrel?

 

[wickedwonka121]

I will say…it depends. I have a set of rounders circle-square mold and some barrels fit snuggly, while some others do not. Its usually one or two chips in each barrel that tend to make it just a bit too wide. The chips have not seen much play at all, so maybe some more worn CPCs would fit fine, or even a different mold.
I’ll take a caliper to them tomorrow to see what the actual width is of the barrels that fit vs. the ones that don’t.

Same. My rounders need to be played. They are minty and don't fit. But on the other hand, I have mint CPCs from Dave's recent sales that fit perfectly. Those have the A mold.

Also, just had my first tournament with these racks and being able to split each one to carry 200 is awesome. Since the big stack was about 300 chips, I used 3 halves of these racks and we moved to 1 table very easily. Next biggest stack was 200. And then the players played straight from the racks. Dropping barrels like kings. Haha. Pretty awesome.

 

[TheOffalo]

Thickness 3.3mm... do these fit PGI 8Vs 20 to a barrel?

Nope, 19. Still great racks!

 

[Jacks]

30x 40mm when back in stock please.

 

[97destroyer]

I'll take 15 more 40mm cases

Changing this to:

25 x 40mm
4 x 43mm
1 x 50mm

 

[TheRealTeddyKGB]

Hey Justin!

I know I've got a Tiger Button coming so if you haven't shipped yet (or even if you have) I need to add (2) 50mm Justin Racks to it. Will pay extra shipping etc if necessary

 

[Name4all2c]

0 more arriving soon

When Available, I'll take

10x 40MM

Thanks!

 

[tallsbutler]

@justincarothers ETA on 40mm restock?

 

[calfdemon]

I will take another 20 of the 40mm when back in stock please...


Thanks!

 

[justincarothers]

@justincarothers ETA on 40mm restock?

They are at port so maybe the end of this week or early next

 

[Gavin]

I will take 30 of the 40mm when back in stock...

Thanx!

 

[aych]

I'll take another 10 of the 40mm.

 

[exodus]

I'll take 10 of the 40mm when back in stock.

 

[davidj]

I'll take 16 of the 43mm please. Thank you!