• This site contains affiliate links. If you choose to make a purchase after clicking a link, Poker Chip Forum may receive a commission at no additional cost to you. Thank you for your support!

ImCrossland’s Chipping Journey! (Lol) (8 Viewers)

ImCrossland said:
This has been an absolutely exhausting process for being a hobby so I’m calling this it. This is my first relabel set. All chips acquired aside from the Bullwhacker’s $1 (I have 1/20).

Inlay removal begins Monday. Time to waste my weekend away with how-to videos.
View attachment 830763
Click to expand...
ESPT25k as $1s? would knock this lineup out of the park!
 
ImCrossland said:
I definitely did not need 2 but it's insane to think these were made for an actual casino and not by chipper themselves. Rack #1 going under the knife.... now!

M5V4fsV.jpg
Click to expand...
1639778272872.gif

#KillersClub :cool
 
ImCrossland said:
Paris $1 cost me $3.5/chip. Much better than $12/chip.
Click to expand...

You can just tell me if you are set on the lineup and don't really want suggestions, but how married to the purple are you? I'm wondering if the snappers as $5s and the yellows as $20s would work well, then you can throw a green shade in the quarter slot.

ImCrossland said:
Okay, can’t get the paper part off. Damnit time to watch video about nail polish remover or something.
Click to expand...

I personally just scraped with the tool seen in the pic in this post and it worked well. Never took anything else to them; the fatter bit helped a lot versus all of the other options I had. The first ten I did were relatively brutal (you can see a couple), but after that it was a breeze; just took some getting used to.
 
Rieguy said:
You can just tell me if you are set on the lineup and don't really want suggestions, but how married to the purple are you? I'm wondering if the snappers as $5s and the yellows as $20s would work well, then you can throw a green shade in the quarter slot.



I personally just scraped with the tool seen in the pic in this post and it worked well. Never took anything else to them; the fatter bit helped a lot versus all of the other options I had.
Click to expand...
Honestly not the biggest fan of a green frac with this specific lineup, although the ESPT500 wasn’t my favorite either. I like an 8v chip and it felt neutral enough to put in there and not “stick out” either good or bad.

I really thought about a yellow $20 and pink $5 but saw another members mock-up of it and didn’t want to make a lineup too close to theirs, out of respect for what I thought was an awesome project.
 
JustDave said:
@Nanook does the best inlay murder.
Click to expand...
I have heard that now from multiple members which means his turnaround time is likely pretty lengthy. Idle hands would make me want to buy something else + I’m really enjoying the process myself (so far).

I’ve got a couple months before the inlays get made so might as well give it a go myself.
 
ImCrossland said:
I have heard that now from multiple members which means his turnaround time is likely pretty lengthy.
Click to expand...
Not so bad.....

ImCrossland said:
I’m really enjoying the process myself (so far).

I’ve got a couple months before the inlays get made so might as well give it a go myself.
Click to expand...
when it stops being enjoyable, give me a shout. I can ease the pain....
 
ImCrossland said:
Paris $1 cost me $3.5/chip. Much better than $12/chip.
Click to expand...
thats a fair point
liftapint said:
And a better fit in this line-up.
Click to expand...
disagree. given how busy and how much pop there is on all the other chips, the paris $1, while a great chip on its own, seems lost in this lineup.

what about AS $1s?
 
I did a total of 5 racks and literally spent a whole weeks vacation doing it.. it can be grueling but be careful with the non acetone removal because it can stain if you leave on there for 20-40 seconds. I messed up and tried to do front and back of about 8 chips. Some were super easy and others not so much. Good luck
 
ImCrossland said:
This has been an absolutely exhausting process for being a hobby so I’m calling this it. This is my first relabel set. All chips acquired aside from the Bullwhacker’s $1 (I have 1/20).

Inlay removal begins Monday. Time to waste my weekend away with how-to videos.
View attachment 830763
Click to expand...
I think this lineup is great, awesome color, super fun and light, great cali set. Are you doing these inlays? If not hopefully something as light and fun.
 
JustDave said:
I think this lineup is great, awesome color, super fun and light, great cali set. Are you doing these inlays? If not hopefully something as light and fun.
Click to expand...
Thanks! Yep, the Big Top Joker inlay shown is what’s going on it. Will go into more detail about it in a dedicated thread once the project is complete but needless to say, I love everything about the BTP inlay so it had to be used in whatever I was putting together.
 
ImCrossland said:
I have heard that now from multiple members which means his turnaround time is likely pretty lengthy. Idle hands would make me want to buy something else + I’m really enjoying the process myself (so far).

I’ve got a couple months before the inlays get made so might as well give it a go myself.
Click to expand...
He’s quick
 
Machine said:
I just want to know who put the Dalek on this chip in the first place?!
Click to expand...
:LOL: :laugh: had to look that one up. Very odd to put that symbol (for some reason I always thought lighthouse) on the inlay but make no reference to it in the club/casino name.
 
ImCrossland said:
Thanks! Yep, the Big Top Joker inlay shown is what’s going on it. Will go into more detail about it in a dedicated thread once the project is complete but needless to say, I love everything about the BTP inlay so it had to be used in whatever I was putting together.
Click to expand...
Make sure you do the color of the flag to match the body of the chip. It's a subtle thing, but it makes a big difference.
 
Perthmike said:
Murdering chips is not enjoyable. It absolutely sucks. But I think I still got to about 2000 or so before I finally said no more.
Click to expand...
Truth. I can only manage a few barrels at a time - in fact, I still have a rack of ESPT T25s sitting on my shelf waiting to be converted into AS $25s. Lord help me when it comes time to murder an entire set of 800 or so chips! o_O
 
Perthmike said:
Murdering chips is not enjoyable. It absolutely sucks. But I think I still got to about 2000 or so before I finally said no more.
Click to expand...
I've been doing nothing but murdering (and buying moar) chips since covid times.
I'm at +30 racks for this year...a few more and i'm done.

Then comes the labeling part (+6000 labels)....after that i'm not murdering a chip for the foreseeable future.
Hope all is well in kangerooland
 

Create an account or login to comment

You must be a member in order to leave a comment

Create account

Create an account and join our community. It's easy!

Register

Log in

Already have an account? Log in here.

Back
Top Bottom