Vendor Sale RACKS* Justin Chip RACKS (3 sizes) *IN STOCK* (4 Viewers)

[Carnth]

Forgive me if it’s been asked previously, but how are the 40mm racks for CPC chips?

Here we have Aurora Club on CPC A mold and the "Justin" chip rack.

Let's pop them in!

The outer barrels do not fit at all. The rack is too narrow for the chips. Not even applying pressure helps, and applying pressure feels like it will damage the chips (I didn't actually try though).
The very center barrel fits all the way, but they gently rub against the sides of the rack enough that I don't want to try to put them in more than once.

So, my overall opinion is that the Justin racks are not for CPC chips.

However, they are awesome for Paulson chips.

 

[cpac54]

Here we have Aurora Club on CPC A mold and the "Justin" chip rack.

View attachment 1191420

Let's pop them in!


View attachment 1191421


The outer barrels do not fit at all. The rack is too narrow for the chips. Not even applying pressure helps, and applying pressure feels like it will damage the chips (I didn't actually try though).
The very center barrel fits all the way, but they gently rub against the sides of the rack enough that I don't want to try to put them in more than once.

So, my overall opinion is that the Justin racks are not for CPC chips.

However, they are awesome for Paulson chips.

Thanks. That’s a shame. I was considering swapping the racks for all my Paulson and CPC chips out for these. Oh well, back to the drawing board.

 

[LowerBama1714]

Here we have Aurora Club on CPC A mold and the "Justin" chip rack.

View attachment 1191420

Let's pop them in!


View attachment 1191421


The outer barrels do not fit at all. The rack is too narrow for the chips. Not even applying pressure helps, and applying pressure feels like it will damage the chips (I didn't actually try though).
The very center barrel fits all the way, but they gently rub against the sides of the rack enough that I don't want to try to put them in more than once.

So, my overall opinion is that the Justin racks are not for CPC chips.

However, they are awesome for Paulson chips.

Oh crap.

 

[LowerBama1714]

I need 25 of the 40mm, please.

Whenevs…

Change…based on CPC fit test

14x40mm
11x43mm

 

[Carnth]

Thanks. That’s a shame. I was considering swapping the racks for all my Paulson and CPC chips out for these. Oh well, back to the drawing board.

These work great for Paulson chips. So, if you don't mind having different style racks for your. Paulsons, I highly recommend.

For anyone with a birdcage: They also easily fit into standard birdcages, which is nice.

 

[cpac54]

These work great for Paulson chips. So, if you don't mind having different style racks for your. Paulsons, I highly recommend.

For anyone with a birdcage: They also easily fit into standard birdcages, which is nice.

Yeah, I’d prefer to have all chips in the same/similar racks.

@justincarothers What would the setup cost and min order req from Tina look like on a new rack design with dimensions to fit CPC chips?

 

[justincarothers]

Yeah, I’d prefer to have all chips in the same/similar racks.

@justincarothers What would the setup cost and min order req from Tina look like on a new rack design with dimensions to fit CPC chips?

Not sure but I can ask. Would need someone to let me know what the dimensions need to be. Also CPC chips are not consistent so they would have to be made larger than the average to make sure all barrels would fit. Might not make them very popular since the chips would not all fit snug

 

[abby99]

Not sure but I can ask. Would need someone to let me know what the dimensions need to be. Also CPC chips are not consistent so they would have to be made larger than the average to make sure all barrels would fit. Might not make them very popular since the chips would not all fit snug

My DIASQR (MD-50) chips only fit about 19.6 chips per barrel. I haven't checked the diameter yet.

 

[Timmah]

How do these work for the BR Poker ceramic 39mm chips?

 

[justincarothers]

How do these work for the BR Poker ceramic 39mm chips?

They should work just fine on 39mm ceramics

 

[Timmah]

They should work just fine on 39mm ceramics

Would I be able to get 20 40mm racks?

 

[justincarothers]

Would I be able to get 20 40mm racks?

Yes. I expect more inventory any day now. Will send you an invoice when they arrive

 

[Colquhoun]

Thanks. That’s a shame. I was considering swapping the racks for all my Paulson and CPC chips out for these. Oh well, back to the drawing board.

Some CPC chips fit, others do not, even among the same set. As Justin mentioned, CPCs tend to be a bit inconsistent with their barrel sizes.
I did some measurements with a caliper on my CSQ Rounders set and posted the results earlier in this thread, so if you happen to have CPCs on the thinner side of the scale, they might fit.
https://www.pokerchipforum.com/threads/justin-chip-racks-3-sizes-in-stock.105247/page-2#post-2176193

Note that @BearMetal mentioned below that post that all his scrowns fit regardless of color.

 

[cpac54]

Some CPC chips fit, others do not, even among the same set. As Justin mentioned, CPCs tend to be a bit inconsistent with their barrel sizes.
I did some measurements with a caliper on my CSQ Rounders set and posted the results earlier in this thread, so if you happen to have CPCs on the thinner side of the scale, they might fit.
https://www.pokerchipforum.com/threads/justin-chip-racks-3-sizes-in-stock.105247/page-2#post-2176193

Note that @BearMetal mentioned below that post that all his scrowns fit regardless of color.

Thanks. I have a pretty large CSQ set, so judging by your results, a bit hit or miss. My other set is DIASQ - no clue how those are. I'll have to test a few barrels with my calipers once I'm home again.

 

[triton]

Change…based on CPC fit test

14x40mm
11x43mm

Be careful — if 40mm racks don’t work the 43mm racks won’t work either (43mm’s have larger diameter than the 40s but same stack height as the 40s)— I will attempt to illustrate with the following pics (43mm rack on left 40 mm on right)

 

[triton]

How do these work for the BR Poker ceramic 39mm chips?

They work great with BRpro

 

[LowerBama1714]

Are the 50

Change…based on CPC fit test

14x40mm
11x43mm

Do the 50mm racks work with the BRPro accessory chips?

 

[Colquhoun]

Are the 50
Do the 50mm racks work with the BRPro accessory chips?

View attachment 1191559

Perfectly! They’re actually a little wider so you could fit 21 in each row. But with the cover on, they dont wiggle much with only 20.

 

[LowerBama1714]

Change…based on CPC fit test

14x40mm
11x43mm

One more change…

14x40mm
11x43mm
2x50mm

Thank you!

 

[AlbinoDragon]

Now that the newest delivery is due to arrive:

4 x 50mm

Please.


Thanks a bunch!!

 

[philhut]

Perfectly! They’re actually a little wider so you could fit 21 in each row. But with the cover on, they dont wiggle much with only 20.

View attachment 1191578

Ordered some specifically for this purpose with a couple of extras for the eventual additions from future group buys.

 

[GreekRedEye]

@justincarothers, I would like to order:

17 x 40mm

Please put me on the order list and invoice me when you it is time.

 

[Pilot38]

@justincarothers, would like 11x40mm as available. Thank you.

 

[Biznasty]

Would love to purchase:

7 x 40mm
1 x 43mm
1 x 50mm

Whenever available.
Thank you Justin for your awesome innovation!

- Biznasty

 

[Timmah]

I would like to update my order request.

20 x 40mm
2 x 50mm

Thanks!

 

[TX_Golf_N_Poker]

Not sure but I can ask. Would need someone to let me know what the dimensions need to be. Also CPC chips are not consistent so they would have to be made larger than the average to make sure all barrels would fit. Might not make them very popular since the chips would not all fit snug

Awesome idea. Please update us if this gets any traction with Tina. I would think a 68mm width should work for most CPC and older ASM/Burt chips. I have a few old LGK chips that come in at 68.5mm, but those are probably outliers.

Yes. I expect more inventory any day now. Will send you an invoice when they arrive

Did this shipment arrive, or is it already sold out?

 

[justincarothers]

Awesome idea. Please update us if this gets any traction with Tina. I would think a 68mm width should work for most CPC and older ASM/Burt chips. I have a few old LGK chips that come in at 68.5mm, but those are probably outliers.

Did this shipment arrive, or is it already sold out?

Still waiting. US Customs is holding up a lot of containers for some reason. It has cleared customs. Just waiting on UPS to pick up

 

[JeepologyOffroad]

I think pretty much all CPC chips fit excellent in Key West racks right? Those are 67.7 I believe

 

[Pippa]

I think pretty much all CPC chips fit excellent in Key West racks right? Those are 67.7 I believe

Exactly
67.7 it’s perfect for CPC

K

 

[abby99]

I think pretty much all CPC chips fit excellent in Key West racks right? Those are 67.7 I believe

FWIW, my experience with ASM and CPC chips is that most fit well in 67.7mm racks.